04-2709. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 26, 2003 to January 16, 2004, consists of the PMNs and TME's both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2004-0072 and the specific PMN number or TME number, must be received on or before March 10, 2004.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2004-0072. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is [phone] and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is [phone].

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket/​, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2004-0072. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to [e-mail], Attention: Docket ID Number OPPT-2004-0072 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2004-0072 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 26, 2003 to January 16, 2004, consists of the PMNs and TMEs both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TME

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 63 Premanufacture Notices Received From: 12/26/03 to 01/16/04

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-04-0204	12/29/03	03/27/04	CBI	(G) Resin for spray applied coatings	(G) Olefin-based block copolymer
P-04-0205	12/29/03	03/27/04	CBI	(S) Component in an industrial coating	(S) 1,4-cyclohexanedicarboxylic acid, polymer with 1,6-hexanediol, nonanedioic acid 1,3,5-tris(2-hydroxyethyl)-1,3,5-triazine-2,4,6(1h,3h,5h)-trione
P-04-0206	12/29/03	03/27/04	Gharda chemicals ltd.	(G) Virgin polymer or with various colorants and glass fibers/carbon fibers (fillers/processing aids for applications)	(G) Polyether ether sulfone sulfone
P-04-0207	12/29/03	03/27/04	CBI	(G) Contained use in energy production.	(G) Phosphonate salt
P-04-0208	12/29/03	03/27/04	CBI	(G) Contained use in energy production.	(G) Phosphonate salt
P-04-0209	12/29/03	03/27/04	CBI	(G) Contained use in energy production.	(G) Phosphonate salt
P-04-0210	12/29/03	03/27/04	CBI	(G) Contained use in energy production.	(G) Phosphonate salt
P-04-0211	12/29/03	03/27/04	CBI	(G) Contained use in energy production.	(G) Phosphonate salt
P-04-0212	12/29/03	03/27/04	CBI	(G) Open, non-dispersive uses	(G) Disproportionated rosin esters
P-04-0213	12/29/03	03/27/04	CBI	(G) Surfactant	(G) Perfluoro alkylethyl acrylate copolymer
P-04-0214	12/29/03	03/27/04	CBI	(G) Surfactant	(G) Perfluoro alkylethyl acrylate copolymer
P-04-0215	12/29/03	03/27/04	CBI	(G) Surfactant	(G) Perfluoro alkylethyl acrylate copolymer
P-04-0216	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Decanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0217	12/31/03	03/29/04	Bp Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Dodecanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0218	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Isooctadecanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0219	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Fatty acids, soya, compounds with 2-amino-2-methyl-1-propanol
P-04-0220	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Fatty acids, coco, compounds with 2-amino-2-methyl-1-propanol
P-04-0221	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Decanedioic acid, compound with 2-amino-2-methyl-1-propanol (1:2)
P-04-0222	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Nitric acid, reaction products with cyclododecanol and cyclododecanone, by-products from, high-boiling fraction, compounds with 2-amino-2-methyl-1-propanol (1:2)
P-04-0223	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Dodecanedioic acid, compound with 2-amino-2-methyl-1-propanol (1:2)
P-04-0224	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Nonanedioic acid, compound with 2-amino-2-methyl-1-propanol (1:2)
P-04-0225	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Undecanedioic acid, compound with 2-amino-2-methyl-1-propanol (1:2)
P-04-0226	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Propanoic acid, 2-hydroxy-, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0227	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) 1-propanol, 2-amino-2-methyl-, benzoate (salt)
P-04-0228	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Boric acid (h3b03), compound with 2-amino-2-methyl-1-propanol
P-04-0229	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Heptanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0230	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Octanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0231	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Nonanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0232	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Hexanoic acid, 2-ethyl-, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0233	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Isononanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0234	12/31/03	03/29/04	BP Amoco Chemical Company	(S) Ferrous metal corrosion inhibitor in metalworking fluid	(S) Neodecanoic acid, compound with 2-amino-2-methyl-1-propanol (1:1)
P-04-0236	01/06/04	04/04/04	H.B. Fuller	(S) Polymer for fiberglassing binder	(G) Polyacrylic resin
P-04-0237	01/06/04	04/04/04	Houghton International, Inc.	(S) Lubricant additive	(G) Alkanolamine carboxylate salt, alkoxylated amine carboxylate salt
P-04-0238	01/06/04	04/04/04	Houghton International, Inc.	(S) Lubricant additive	(G) Alkanolamine carboxylate salt, alkoxylated amine carboxylate salt
P-04-0239	01/06/04	04/04/04	Houghton International, Inc.	(S) Lubricant additive	(G) Alkanolamine carboxylate salt, alkoxylated amine carboxylate salt
P-04-0240	01/06/04	04/04/04	Houghton International, Inc.	(S) Lubricant additive	(G)Alkanolamine carboxylate salt, Alkoxylated amine carboxylate salt
P-04-0241	01/06/04	04/04/04	Houghton International, Inc.	(S) Lubricant additive	(G) Alkanolamine carboxylate salt, Alkoxylated amine carboxylate salt
P-04-0242	01/06/04	04/04/04	Houghton International, Inc.	(S) Lubricant additive	(G) Alkanolamine carboxylate salt, Alkoxylated amine carboxylate salt
P-04-0243	01/06/04	04/04/04	Werk-AM Co., LTD	(G) Developer Chemical	(G) Hydroxy-arylsulphone
P-04-0244	12/31/03	03/29/04	Great Lakes Chemical	(S) Chemical intermediate	(S) Ethane, 2-bromo-1,1-difluoro-
P-04-0245	01/07/04	04/05/04	CBI	(G) Polymeric admixture for cements	(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), potassium sodium salt
P-04-0246	01/07/04	04/05/04	CBI	(G) Polymeric admixture for cements	(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), potassium sodium salt
P-04-0247	01/07/04	04/05/04	CBI	(S) Fertilizer for turf and crops	(S) Oils, sargassum thunbergii
P-04-0248	01/07/04	04/05/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0249	01/07/04	04/05/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0250	01/07/04	04/05/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0251	01/07/04	04/05/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0252	01/07/04	04/05/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0253	01/07/04	04/05/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0254	01/08/04	04/06/04	CBI	(G) Coating additive	(G) Mixed metal complex
P-04-0255	01/12/04	04/10/04	CBI	(S) Coil coatings	(G) Polymer of aliphatic/aromtic polycarboxylic acids and aliphatic polyols
P-04-0256	01/12/04	04/10/04	CBI	(S) Adhesives; coatings	(G) Polybutadiene prepolymer
P-04-0257	01/12/04	04/10/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0258	01/12/04	04/10/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0259	01/12/04	04/10/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0260	01/12/04	04/10/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0261	01/12/04	04/10/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0262	01/12/04	04/10/04	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) Multifunctional acrylate oligomer resin
P-04-0263	01/13/04	04/11/04	CBI	(S) Coil coating	(G) Polymer of cycloaliphatic polycarboxylic acid and aliphatic polyol
P-04-0264	01/13/04	04/11/04	CBI	(G) Lubricating agent (lubricant)	(G) Thiophenol mix
P-04-0265	01/13/04	04/11/04	CIBA Specialty Chemicals Corporation, Textile Effects	(S) A component in oil, water, and soil repellent finish of fabrics of all fibers	(G) Substituted alkyl diol polymer with substituted alkyloxime and substituted cycloalkane and unsaturated alcohols
P-04-0266	01/14/04	04/12/04	AOC L.L.C.	(S) Polymer component for laminating of fiberglass reinforced plastic parts	(S) 1,3-isobenzofurandione, polymer with 1,2-ethanediol, 2,5-furandione, 2,2'-oxybis[ethanol] and 1,2-propanediol, 3a,4,5,6,7,7a-hexahydro-4,7-methano-1h-inden-5(or 6)-yl ester
P-04-0267	01/15/04	04/13/04	CBI	(S) Laminating adhesive	(G) Aromatic polyether polyester polyurethane

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 2 Test Marketing Exemption Notices Received From: 12/26/03 to 01/16/04

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-04-0001	12/30/03	02/12/04	CBI	(G) Polyurethane's market	(G) Soy polyol
T-04-0002	01/12/04	02/25/04	IIford Imaging USA	(S) Dye formulated in water-based ink for use in inkjet printer cartridges.	(S) 1h-pyrazole-3-carboxlic acid, 4-[[5-[[4,6-bis[(3-sulfopropyl)thio]-1,3,5-triazin-2-yl]amino]-2-sulfophenyl]azo]-1-(2,5-dichloro-4-sulfophenyl)-4,5-dihydro-5-oxo-, pentasodium salt

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 17 Notices of Commencement From: 12/26/03 to 01/16/04

Case No.	Received Date	Commencement Notice End Date	Chemical
P-01-0247	01/07/04	11/18/03	(G) Reaction product of aliphatic amines with fatty acids, phthalic anhydride and epoxide oligomers
P-02-0983	12/29/03	12/01/03	(G) Substituted-alkyl-heteromonocycle
P-02-1041	12/29/03	12/21/03	(G) Isocyanate functional polyester polyether urethane polymer
P-03-0104	01/13/04	12/08/03	(G) Tristyryl phenol alkoxylate salt
P-03-0108	01/06/04	12/12/03	(G) Substituted cyan acetic acid pentyl ester
P-03-0357	01/07/04	12/08/03	(G) Transition metal complex
P-03-0587	01/05/04	11/17/03	(S) Propanoic acid, 2-hydroxy-,(2r)-
P-03-0598	01/15/04	12/29/03	(G) Sulfurized vegetable oil
P-03-0599	01/15/04	12/29/03	(G) Sulfurized vegetable oil
P-03-0618	01/12/04	12/10/03	(G) Silsesquioxane
P-03-0653	01/12/04	12/09/03	(G) Polycarboxylate polymer with alkenylsubstituted carbomonocycle, modified with poly(oxyalkylenediyl) and polymer of heteromonocycle and alkylheteromonocycle monoalkyl ether, sodium salt
P-03-0770	01/13/04	12/30/03	(G) Hydrophobically modified hydroethylcellulose
P-03-0787	01/12/04	12/09/03	(S) 13-docosenoic acid, potassium salt, (13z)-
P-03-0788	12/29/03	12/01/03	(S) Docosanoic acid, potassium salt
P-03-0833	01/07/04	12/15/03	(G) Di-substituted stilbenedisulfonic acid salt
P-03-0834	01/07/04	12/12/03	(G) Derivative of a disubstituted phenylenediamine
P-99-0920	12/29/03	12/11/03	(S) Poly(oxy-1,2-ethanediyl), alpha-(9z)-9-octadecenyl-omega-hydroxy-, phosphate, ammonium salt

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: January 29, 2004.

Anthony Cheatham,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.