05-2873. Regulatory Flexibility Act Section 610 and Plain Language Reviews

AGENCY:

Research and Special Programs Administration (RSPA), DOT.

ACTION:

Notice of regulatory review; request for comments.

SUMMARY:

RSPA requests comments on the economic impact of its regulations on small entities. As required by the Regulatory Flexibility Act and as published in DOT's Semi-Annual Regulatory Agenda, we are analyzing the rules applicable to general shipment and packaging requirements for shippers to identify requirements that may have a significant economic impact on a substantial number of small entities. We also request comments on ways to make these regulations easier to read and understand.

DATES:

Comments must be received by May 16, 2005.

ADDRESSES:

You may submit comments identified by the docket number RSPA-2005-20104 (Notice No. 05-02) by any of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the instructions for submitting comments.
• Web Site: http://dms.dot.gov. Follow the instructions for submitting comments on the DOT electronic docket site.
• Fax: [phone].
• Mail: Docket Management System; U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401, Washington, DC 20590-0001.
• Hand Delivery: To the Docket Management System; Room PL-401 on the plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC between 9 am and 5 pm, Monday through Friday, except Federal Holidays.

Instructions: You must include the agency name and docket number RSPA-2005-20104 (Notice No. 05-02) at the beginning of your comment. Note that all comments received will be posted without change to http://dms.dot.gov including any personal information provided. Anyone is able to search the electronic form of any written communications and comments received into any of our dockets by the name of the individual submitting the document (or signing the document, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's complete Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477) or you may visit http://dms.dot.gov.

Docket: You may view the public docket through the Internet at http://dms.dot.gov or in person at the Docket Management System office at the above address.

FOR FURTHER INFORMATION CONTACT:

Susan Gorsky, Office of Hazardous Materials Standards, Research and Special Programs Administration, U.S. Department of Transportation, telephone [phone]; or Donna O'Berry, Office of Chief Counsel, Research and Special Programs Administration, U.S. Department of Transportation, telephone [phone].

SUPPLEMENTARY INFORMATION:

I. Section 610 of the Regulatory Flexibility Act

A. Background and Purpose

Section 610 of the Regulatory Flexibility Act of 1980 (Pub. L. 96-354), as amended by the Small Business Regulatory Enforcement Fairness Act of 1996 (Pub. L.104-121), requires agencies to conduct periodic reviews of rules that have a significant economic impact on a substantial number of small business entities. The purpose of the review is to determine whether such rules should be continued without change, amended, or rescinded, consistent with the objectives of applicable statutes, to minimize any significant economic impact of the rules on a substantial number of such small entities.

B. Review Schedule

The Department of Transportation (DOT) published its Semiannual Regulatory Agenda on December 13, 2004 (69 FR 73492), listing in Appendix D (69 FR 73505) those regulations that each operating administration will review under section 610 during the next 12 months. Appendix D also contains DOT's 10-year review plan for all of its existing regulations.

The Research and Special Programs Administration (RSPA, we) has divided its Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) into 10 groups by subject area. Each group will be reviewed once every 10 years, undergoing a two-stage process—an Analysis Year and Section 610 Review Year. For purposes of the review announced in this notice, the Analysis year began in December 2004, coincident with the fall 2004 publication of the Semiannual Regulatory Agenda, and will conclude in the fall of 2005.

During the Analysis Year, we will analyze each of the rules in a given year's group to determine whether any rule has a significant impact on a substantial number of small entities and, thus, requires review in accordance with section 610 of the Regulatory Flexibility Act. In each fall's Regulatory Agenda, we will publish the results of the analyses we completed during the previous year. For rules that have a negative finding, we will provide a short explanation. For parts, subparts, or other discrete sections of rules that do have a significant impact on a substantial number of small entities, we will announce that we will be conducting a formal section 610 review during the following 12 months.

The section 610 review will determine whether a specific rule should be revised or revoked to lessen its impact on small entities. We will consider: (1) The continued need for the rule; (2) the nature of complaints or comments received from the public; (3) the complexity of the rule; (4) the extent to which the rule overlaps, duplicates, or conflicts with other federal rules or with state or local government rules; and (5) the length of time since the rule has been evaluated or the degree to which technology, economic conditions, or other factors have changed in the area affected by the rule. At the end of the Review Year, we will publish the results of our review.

The following table shows the 10-year analysis and review schedule:

RSPA Section 610 Review Plan 1999-2009

Title	Regulation	Analysis year	Review year
Incident reports	§§ 171.15 and 171.16	1998	N/A
Hazmat safety procedures	Parts 106 and 107	1999	N/A
General Information, Regulations, and Definitions	Part 171.
Carriage by Rail and Highway	Parts 174 and 177	2000	N/A
Carriage by Vessel	Part 176	2001	N/A
Radioactive Materials	Parts 172, 173, 174, 175, 176, 177, 178	2002	N/A
Explosives	Parts 172, 173, 174, 176, 177	2003	N/A
Cylinders	Parts 172, 173, 174, 176, 177, 178, 180.
Shippers—General Requirements for Shipments and Packagings	Part 173	2004	2005
Specifications for Non-bulk Packagings	Part 178	2005	2006
Training and planning grants	Part 110
Specifications for Bulk Packagings	Parts 178, 179, 180	2006	2007
Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements	Part 172	2007	2008
Carriage by Aircraft	Part 175.

C. Regulations Under Analysis

During Year 6 (2004-2005), the Analysis Year, we will conduct a preliminary assessment of the rules in 49 CFR Part 173 applicable to general shipment and packaging requirements for shippers. The review will include the following subparts:

Part 173

Subpart	Title
Subpart A	General.
Subpart B	Preparation of Hazardous Materials for Transportation.
Subpart D	Definitions, Classification, Packing Group Assignments and Exceptions for Hazardous Materials Other Than Class 1 and Class 7.
Subpart E	Non-bulk Packaging for Hazardous Materials Other Than Class 1 and Class 7.
Subpart F	Bulk Packaging for Hazardous Materials Other Than Class 1 and Class 7.
Subpart G	Gases; Preparation and Packaging.
Subpart I	Class 7 (Radioactive) Materials.

We are seeking comments on whether any requirements for shippers in Part 173 have a significant impact on a substantial number of small entities. “Small entities” include small businesses, not-for-profit organizations that are independently owned and operated and are not dominant in their fields, and governmental jurisdictions with populations under 50,000. If your business or organization is a small entity and if any of the transportation requirements applicable to shippers in Part 173 has a significant economic impact on your business or organization, please submit a comment explaining how and to what degree these rules affect you, the extent of the economic impact on your business or organization, and why you believe the economic impact is significant.

II. Plain Language

A. Background and Purpose

Plain language helps readers find requirements quickly and understand them easily. Examples of plain language techniques include:

(1) Undesignated center headings to cluster related sections within subparts.

(2) Short words, sentences, paragraphs, and sections to speed up reading and enhance understanding.

(3) Sections as questions and answers to provide focus.

(4) Personal pronouns to reduce passive voice and draw readers into the writing.

(5) Tables to display complex information in a simple, easy-to-read format.

For an example of a rule drafted in plain language, you can refer to RSPA's final rule entitled “Revised and Clarified Hazardous Materials Safety Rulemaking and Program Procedures,” which was published June 25, 2002 (67 FR 42948). This final rule revised and clarified the hazardous materials safety rulemaking and program procedures by rewriting 49 CFR Part 106 and Subpart A of Part 107 in plain language and creating a new part 105 that contains definitions and general procedures.

B. Review Schedule

In conjunction with our section 610 reviews, we will be performing plain language reviews of the HMR over a 10-year period on a schedule consistent with the section 610 review schedule. Thus, our review of requirements in Part 173 applicable to general shipment and packaging requirements for shippers will also include a plain language review to determine if the regulations can be reorganized and/or rewritten to make them easier to read, understand, and use. We encourage interested persons to submit draft regulatory language that clearly and simply communicates regulatory requirements, and other recommendations, such as putting information in tables or consolidating regulatory requirements, that may make the regulations easier to use.

Issued in Washington, DC on February 9, 2005 under authority delegated in 49 CFR Part 106.

Robert A. McGuire,

Associate Administrator for Hazardous Materials Safety, Research and Special Programs Administration.