2013-17120. SafetyAlert: Safety Alert: Risks Associated With Liquid Petroleum (LP) Gas Odor Fade  

  • Start Preamble

    AGENCY:

    Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT.

    ACTION:

    Safety Alert Notice.

    SUMMARY:

    PHMSA is issuing this safety alert to notify the public of the risks associated with the under-odorization of Liquefied Petroleum Gases (LPG). LPG is an odorless and colorless gas that under certain conditions is required to be odorized for leak detection. The purpose of this alert is to advise shippers and carriers of the recommended procedures to ensure that LPG is properly odorized by all modes of transportation.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Charles Betts, Director, (email: charles.betts@dot.gov) or Delmer Billings, Senior Regulatory Advisor (email: delmer.billings@dot.gov), Standards and Rulemaking Division, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, 1200 New Jersey Avenue SE., Washington DC 20590. Telephone: (202) 366-8553, Fax: (202) 366-7435.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    PHMSA is aware of several incidents possibly attributed to either the under-odorization or odorant fade of liquefied petroleum gas (LPG). Most notable of these incidents is one that happened in Norfolk, MA on July 30, 2010 where an explosion occurred at a residential condominium complex that was under construction. Emergency responders from 21 cities/towns deployed personnel to the accident site. The accident resulted in seven injuries and one fatality.

    The subsequent investigation raised questions as to whether there was a sufficient level of odorant in the LPG contained in the on-site storage tanks. In accordance with Federal and State laws and regulations, LPG intended for use by non-industrial entities is generally required to be odorized, or stenched, to enable the detection of any unintended release or leak of the gas. LPG is highly flammable and dangerous to inhale in large quantities. The added odorant is a safety precaution that helps warn those in the area that a release of gas has occurred. In the Norfolk incident, there appeared to be no warning, i.e. odorant smell, prior to the explosion, that the on-site LPG storage tank was leaking. PHMSA has consulted with stakeholders from industry, fire fighter associations, and other regulatory agencies in order to better understand the root cause of incidents like the one in Norfolk. Although additional research may be necessary in order to come to more definitive conclusions, PHMSA has identified situations in which the risks of under-odorization or odor fade are more likely to occur. These situations are outlined below along with recommendations to mitigate potential risk factors that might lead to preventable outcomes.

    Injection Process: On December 13, 2012, PHMSA met with representatives from the National Propane Gas Association (NPGA) to gain a better understanding of the LPG odorization process. During this meeting, representatives from the NPGA stated that the most common method for the odorization of LPG is through an automated system. However, the NPGA also noted there are situations where the odorization process is manually performed. Preliminary investigations into the Norfolk, MA incident suggest that the lack of sufficient odorization rendered the LPG undetectable when the on-site storage tank began to leak. In situations where the injection process is not fully automated, the potential for human error may increase the possibility of under-odorization. We believe that the insufficient level of odorant in the LPG contained in the on-site storage tank involved in the Norfolk, MA incident was likely a major contributing factor in restricting the ability of on-site personnel to readily detect the leak. Therefore, in this safety alert, PHMSA recommends that when the odorization of LPG is being accomplished by a manual injection process, quality control checks should be conducted to ensure that the requisite amount of odorant is being injected. Additionally, PHMSA recommends that when odorization of LPG is automatically injected, equipment calibration checks should be periodically performed to ensure consistent injection levels of the required odorant.

    New Tanks or Freshly Cleaned Tanks: During our meetings with various stakeholders, several indicated that a phenomenon known as “odor fade” may be a problem when new or recently cleaned tanks are used. New or recently cleaned tanks may absorb the odorant into the metal shell of these tanks, thus limiting the effectiveness of the remaining odorant in the LPG. Based on Start Printed Page 42819this belief, we recommend that persons who receive new or recently cleaned tanks be notified of this fact and that persons filling these tanks implement appropriate quality control measures to ensure that potential odorant fade is adequately addressed. Such quality control measures will ensure that when delivered to end users, the LPG has sufficient odorant to be detected should a leak occur.

    Odorization Standards: The odorization of LPG is addressed by a myriad of Federal and State laws and regulations, as well as, by accepted industry standards and practices. When offered and transported in commerce, the HMR specifies that all LPG in cargo and portable tanks be effectively odorized using either 1.0 pound of ethyl mercaptan, 1.0 pound of thiopane, or 1.4 pounds of amyl mercaptan per 10,000 gallons of LPG, in the event of an unintended release or leak to indicate the presence of gas. The HMR do not, however, require LPG to be ordorized if odorization would be harmful in the use or further processing of the LPG, or if odorization will serve no useful purpose as a warning agent in such use or further processing. Essentially, this exception applies to LPG being transported to industrial end-users.

    Although the HMR requires odorization of LPG in cargo tanks and portable tanks, there are no such requirements in the HMR for rail tank car tanks and cylinders. Therefore, in this safety alert, PHMSA recommends that all LPG transported in rail tank car tanks or cylinders be odorized in accordance with the requirements of § 173.315(b)(1), of the HMR, unless odorization would be harmful in the use or further processing of the LPG, or if odorization will serve no useful purpose as a warning agent in such use or further processing.

    Start Signature

    Issued in Washington, DC on July 12, 2013.

    Magdy El-Sibaie,

    Associate Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration.

    End Signature End Supplemental Information

    [FR Doc. 2013-17120 Filed 7-16-13; 8:45 am]

    BILLING CODE 4910-60-P

Document Information

Published:
07/17/2013
Department:
Pipeline and Hazardous Materials Safety Administration
Entry Type:
Notice
Action:
Safety Alert Notice.
Document Number:
2013-17120
Pages:
42818-42819 (2 pages)
Docket Numbers:
Docket No. PHMSA-2013-0157, [Notice No. 13-10
PDF File:
2013-17120.pdf