2013-19019. Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 031  

  • Start Preamble

    AGENCY:

    Food and Drug Administration, HHS.

    ACTION:

    Notice.

    SUMMARY:

    The Food and Drug Administration (FDA) is announcing a publication containing modifications the Agency is making to the list of standards FDA recognizes for use in premarket reviews (FDA recognized consensus standards). This publication, entitled “Modifications to the List of Recognized Standards, Recognition List Number: 031” (Recognition List Number: 031), will assist manufacturers who elect to declare conformity with consensus standards to meet certain requirements for medical devices.

    DATES:

    Submit written or electronic comments concerning this document at any time. See section VII for the effective date of the recognition of standards announced in this document.

    ADDRESSES:

    Submit written requests for single copies of “Modifications to the List of Recognized Standards, Recognition List Number: 031” to the Division of Small Manufacturers, International and Consumer Assistance, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Silver Spring, MD 20993. Send two self-addressed adhesive labels to assist that office in processing your requests, or fax your request to 301-847-8149. Submit written comments concerning this document, or recommendations for additional standards for recognition, to the contact person (see FOR FURTHER INFORMATION CONTACT). Submit electronic comments by email: standards@cdrh.fda.gov. This document may also be accessed on FDA's Internet site at http://www.fda.gov/​MedicalDevices/​DeviceRegulationandGuidance/​Standards/​ucm123792.htm. See section VI for electronic access to the searchable database for the current list of FDA recognized consensus standards, including Recognition List Number: 031 modifications and other standards related information.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Scott A. Colburn, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave. Bldg. 66, Rm. 3632, Silver Spring, MD 20993, 301-796-6287.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Background

    Section 204 of the Food and Drug Administration Modernization Act of 1997 (FDAMA) (Pub. L. 105-115) amended section 514 of the Federal Food, Drug, and Cosmetic Act (the FD&C Act) (21 U.S.C. 360d). Amended section 514 allows FDA to recognize consensus standards developed by international and national organizations for use in satisfying portions of device premarket review submissions or other requirements.

    In a notice published in the Federal Register of February 25, 1998 (63 FR 9561), FDA announced the availability of a guidance entitled “Recognition and Use of Consensus Standards.” The notice described how FDA would implement its standard recognition program and provided the initial list of recognized standards.

    Modifications to the initial list of recognized standards, as published in the Federal Register, can be accessed at http://www.fda.gov/​MedicalDevices/​DeviceRegulationandGuidance/​Standards/​ucm123792.htm.

    These notices describe the addition, withdrawal, and revision of certain standards recognized by FDA. The Agency maintains “hypertext markup language (HTML)” and “portable document format (PDF)” versions of the list of “FDA Recognized Consensus Standards.” Both versions are publicly accessible at the Agency's Internet site. See section VI for electronic access information. Interested persons should review the supplementary information sheet for the standard to understand fully the extent to which FDA recognizes the standard.

    II. Modifications to the List of Recognized Standards, Recognition List Number: 031

    FDA is announcing the addition, withdrawal, correction, and revision of certain consensus standards the Agency will recognize for use in premarket submissions and other requirements for devices. FDA will incorporate these modifications in the list of FDA Recognized Consensus Standards in the Agency's searchable database. FDA will use the term “Recognition List Number: 031” to identify these current modifications.

    In table 1, FDA describes the following modifications: (1) The withdrawal of standards and their replacement by others, if applicable; (2) the correction of errors made by FDA in listing previously recognized standards; and (3) the changes to the supplementary information sheets of recognized standards that describe revisions to the applicability of the standards.

    In section III, FDA lists modifications the Agency is making that involve the initial addition of standards not previously recognized by FDA.Start Printed Page 47704

    Table 1—Modifications to the List of Recognized Standards

    Old recognition No.Replacement recognition No.Title of standard 1Change
    A. Anesthesia
    1-741-91ISO 5360 Third edition 2012-01-15 Anaesthetic vaporizers—Agent-specific filling systemsWithdrawn and replaced with newer version.
    1-351-93ISO 5361 Second edition 2012-10-01 Anaesthetic and respiratory equipment—Tracheal tubes and connectorsWithdrawn and replaced with newer version.
    1-82IEC 60601-2-13 Edition 3.1 2009-08 Medical electrical equipment—Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systemsTransition period extended.
    1-88ISO 80601-2-12 Medical electrical equipment—Part 2-12: Particular requirements for the safety of lung ventilators—Critical care ventilatorsTransition period extended.
    B. Biocompatibility
    2-119ASTM F813-07 (Reapproved 2012) Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical DevicesReaffirmation.
    2-122ASTM F719-81 (Reapproved 2012) Standard Practice for Testing Biomaterials in Rabbits for Primary Skin IrritationReaffirmation.
    2-123ASTM F720-81 (Reapproved 2012) Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization TestReaffirmation.
    2-124ASTM F750-87 (Reapproved 2012) Standard Practice for Evaluating Materials Extracts by Systemic Injection in the MouseReaffirmation.
    2-1252-197ASTM F749-13 Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the RabbitWithdrawn and replaced with newer version.
    2-1352-198ANSI/AAMI/ISO 10993-12:2012 Biological evaluation of medical devices—Part 12:Sample preparation and reference materialsWithdrawn and replaced with newer version.
    2-146ASTM F2148-07 (Reapproved 2012) Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)Reaffirmation.
    2-152ISO 10993-10:2002/Amd.1:2006(E) Biological evaluation of medical devices—Part 10: Tests for irritation and delayed-type hypersensitivity AMENDMENT 1Withdrawn, see 2-174.
    2-1922-199USP 36-NF31:2013 <87> Biological Reactivity Test, In Vitro—Direct Contact TestWithdrawn and replaced with newer version.
    2-1932-200USP 36-NF31:2013Biological Tests <87> Biological Reactivity Tests, In Vitro—Elution TestWithdrawn and replaced with newer version.
    2-1942-201USP 36-NF31:2013 Biological Tests <88> Biological Reactivity Tests, In Vivo Procedure Preparation of SampleWithdrawn and replaced with newer version.
    2-1952-202USP 36-NF31:2013 Biological Tests <88> Biological Reactivity Tests, In Vitro Classification of Plastics—Intracutaneous TestWithdrawn and replaced with newer version.
    2-1962-203USP 36-NF31:2013 Biological Tests <88> Biological Reactivity Tests, In Vivo Classification of Plastics—Systemic Injection TestWithdrawn and replaced with newer version.
    C. Cardiovascular
    3-383-115IEC 60601-2-34 Edition 3.0 2011-05 Medical Electrical Equipment—Part 2-34: Particular Requirements for the Basic Safety and Essential Performance of Invasive Blood Pressure Monitoring EquipmentNewer version with transition period.
    3-55ASTM F1830-97 (Reapproved 2013) Standard Practice for Selection of Blood for In Vitro Evaluation of Blood PumpsReaffirmation.
    3-56ASTM F1841-97 (Reapproved 2013) Standard Practice for Assessment of Hemolysis in Continuous Flow Blood PumpsReaffirmation.
    3-66ASTM F2081-06 (Reapproved 2013) Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular StentsReaffirmation.
    3-79ASTM F2079-09 (Reapproved 2013) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable StentsReaffirmation.
    3-86ASTM F2394-07 (Reapproved 2013) Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery SystemReaffirmation.
    3-87ASTM F2477-07 (Reapproved 2013) Standard Test Methods for in vitro Pulsatile DurabilityReaffirmation.
    3-813-117ANSI/AAMI/ISO 81060-2 Second edition 2013-05-01, Non-Invasive Sphygmomanometers—Part 2: Clinical Validation of Automated Measurement TypeWithdrawn and replaced with newer version.
    3-943-116ISO 25539-2 Second edition 2012-12-01 Cardiovascular Implants—Endovascular Devices—Part 2: Vascular Stents Part 2: Vascular StentWithdrawn and replaced with newer version.
    Start Printed Page 47705
    D. Dental/ENT
    4-75ISO 7785-1 Second edition 1997-08-01 Dental Handpieces—Part 1: High-Speed Air Turbine HandpiecesWithdrawn, see 4-206.
    4-76ISO 7785-2 Second edition 1995-08-0 Dental Handpieces—Part 2: Straight and Geared Angle HandpiecesWithdrawn, see 4-206.
    4-83ISO 11498 First edition 1997-02-15 Dental Handpieces: Dental Low-Voltage Electrical MotorsWithdrawn, see 4-206.
    4-84ISO 13294 First edition 1997-05-01 Dental Handpieces—Dental Air-MotorsWithdrawn, see 4-206.
    4-90ANSI S3.39:1987 (Reaffirmed by ANSI June 15, 2012) American National Standard Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)Reaffirmation.
    4-119ANSI/ADA Specification No. 82:1998/ISO 13716:1999 Reaffirmed by ANSI: January 2009 Dental Reversible/Irreversible Hydrocolloid Impression Material SystemsReaffirmation.
    4-1234-203ANSI/ASA S3.6-2010 (Revision of ANSI S3.6-2004) Specification for AudiometersWithdrawn and replaced with newer version.
    4-167ANSI/ASA S3.21-2004 (R2009) Methods for Manual Pure-Tone Threshold AudiometryReaffirmation.
    4-1724-204ANSI/ASA S3.42-2012/Part 2/IEC 60118-15:2012 American National Standard Testing Hearing Aids—Part 2: Methods for characterizing signal processing in hearing aids with a speech-like signal (a nationally adopted international standard)Withdrawn and replaced with newer version.
    4-187IEC 60601-2-18 Edition 3.0 2009-08 Medical electrical equipment—Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipmentTransition period extended.
    E. General
    5-53IEC 60601-1-2 Edition 3.0 2007-03 Medical electrical equipment—Part 1-2: General requirements for basic safety and essential performance—Collateral standard: Electromagnetic compatibility—Requirements and testsTransition period extended.
    5-54ANSI/AAMI/IEC 60601-1-2:2007/(R)2012 Medical electrical equipment—Part 1-2: General requirements for basic safety and essential performance—Collateral standard: Electromagnetic compatibility—Requirements and testsReaffirmation and transition period extended.
    5-555-76IEC 60601-1-8 Edition 2.1 2012-11 Medical electrical equipment—Part 1-8: General requirements for basic safety and essential performance—Collateral standard: General requirements, tests, and guidance for alarm systems in medical electrical equipment and medical electrical systemsWithdrawn and replaced with newer version. Transition period extended.
    5-715-77ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text), Medical electrical equipment—Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD)Withdrawn and replaced with new version.
    5-745-77ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text), Medical electrical equipment—Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD)Withdrawn and replaced with new version.
    F. General Hospital/General Plastic Surgery
    6-96-300IEC 60601-2-21 Edition 2.0 2009-02 Medical electrical equipment—Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmersNewer version with transition period.
    6-296-298IEC 60601-2-19 Edition 2.0 2009-02 Medical electrical equipment—Part 2-19: Particulars for the basic safety and essential performance of infant incubatorsNewer version with transition period.
    6-326-299IEC 60601-2-20 Edition 2.0 2009-02 Medical electrical equipment—Part 2-20: Particular requirements for the basic safety and essential performance of infant radiant warmersNewer version with transition period.
    6-1166-294ISO 11608-3 Second edition 2012-10-01 Needle-based injection systems for medical use—Requirements and test methods—Part 3: Finished containersWithdrawn and replaced with newer version.
    6-1196-295ANSI/AAMI BF7:2012 Blood transfusion microfiltersWithdrawn and replaced with newer version.
    6-147ASTM D6978—05 (Reapproved 2013) Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy DrugsReaffirmation.
    Start Printed Page 47706
    6-174ISO 11608-4 First edition 2006-03-15 Pen-injectors for medical use—Part 4: Requirements and test methods for electronic and electromechanical pen-injectorsContact person.
    6-179ISO 21649 First edition 2006-06-01, Needle-free injectors for medical use—Requirements and test methodsContact person.
    6-1126-296ANSI/AAMI PB70:2012 Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilitiesWithdrawn and replaced with newer version.
    6-214ASTM D6355—07 (Reapproved 2012) Standard Test Method for Human Repeat Insult Patch Testing of Medical GlovesReaffirmation.
    6-216ISO 8536-7 Third edition 2009-01-15 Infusion equipment for medical use—Part 7: Caps made of aluminium-plastics combinations for infusion bottlesContact person.
    6-227ANSI/AAMI/IEC 60601-2-21:2009, Medical electrical equipment—Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmersTransition period extended.
    6-228IEC 60601-2-2 Edition 5.0 2009-02, Medical Electrical Equipment—Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessoriesTransition period extended.
    6-229ANSI/AAMI/IEC 60601-2-2:2009, Medical electrical equipment—Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgery equipment and high frequency surgical accessoriesTransition period extended.
    6-230ANSI/AAMI/IEC 60601-2-19:2009, Medical Electrical Equipment—Part 2-19: Particular requirements for the basic safety and essential performance of infant incubatorsTransition period extended.
    6-231ANSI/AAMI/IEC 60601-2-20:2009, Medical Electrical Equipment—Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubatorsTransition period extended.
    6-233IEC 60601-2-52 Edition 1.0 2009-12 Medical electrical equipment—Part 2-52: Particular requirements for basic safety and essential performance of medical bedsTransition period extended.
    6-234IEC 60601-2-50 Edition 2.0 2009-03 Medical electrical equipment—Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipmentContact person.
    6-235ANSI/AAMI/IEC 60601-2-50:2009 Medical Electrical Equipment—Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipmentContact person.
    6-239ISO 8536-6 Second edition 2009-11-15 Infusion equipment for medical use—Part 6: Freeze drying closures for infusion bottlesContact person.
    6-240ISO 8536-3 Third edition 2009-06-01 Infusion equipment for medical use—Part 3: Aluminum caps for infusion bottlesContact person.
    6-2416-297ISO 1135-4 Fifth edition 2012-03-01 Transfusion equipment for medical use—Part 4: Transfusion sets for single useWithdrawn and replaced with newer version.
    6-274ISO 11608-1 Second edition 2012-04-01 Needle-based injection systems for medical use—Requirements and test methods—Part 1: Needle-based injection systemsContact person.
    6-275ISO 11608-2 Second edition 2012-04-01 Needle-based injection systems for medical use—Requirements and test methods—Part 2: NeedlesContact person.
    6-276ISO 8536-1 Fourth edition 2011-09-01 Infusion equipment for medical use—Part 1: Infusion glass bottlesContact person.
    G. In Vitro Diagnostics
    7-3CLSI/NCCLS GP10-A 1995, Assessment of the Clinical Accuracy of Laboratory Tests Using Receiver Operating Characteristic (ROC) Plots; Approved GuidelineWithdrawn, see 7-234.
    7-4CLSI/NCCLS GP14-A 1996, Labeling of Home-Use In Vitro Testing Products; Approved GuidelineWithdrawn.
    7-37NCCLS I/LA6-A, Detection and Quantitation of Rubella IgG Antibody: Evaluation and Performance Criteria for Multiple Component Test Products, Specimen Handling, and Use of Test Products in the Clinical Laboratory; Approved GuidelineWithdrawn.
    7-41NCCLS I/LA19-A, Primary Reference Preparations Used to Standardize Calibration of Immunochemical Assays for Serum Prostate Specific Antigen (PSA); Approved Guideline (1997)Withdrawn.
    7-154CLSI MM02-A2, Immunoglobulin and T-Cell Receptor Gene Rearrangement AssaysWithdrawn.
    Start Printed Page 47707
    7-171CLSI M38-A2, Reference Method for Broth Dilution Antifungal Susceptibility Testing of Filamentous Fungi; Approved Standard—Second EditionExtent of recognition, process affected, and contact person.
    7-178CLSI M22-A3, Quality Control for Commercially Prepared Microbiological Culture Media; Approved Standard—Third EditionExtent of recognition, process affected, and contact person.
    7-1797-240CLSI M27-S4, Reference Method for Broth Dilution Antifungal Susceptibility Testing of Yeasts; Fourth Informational SupplementWithdrawn and replaced with newer version.
    7-200CLSI M48-A, Laboratory Detection and Identification of Mycobacteria; Approved GuidelineExtent of recognition, type of standard, and process affected.
    7-206CLSI I/LA 20-A2 Analytical Performance Characteristics and Clinical Utility of Immunological Assays for Human Immunoglobulin E (IgE) Antibodies and Defined Allergen Specificities; Approved Guideline—Second EditionRelevant guidance.
    7-215CLSI M44-A2, Method for Antifungal Disk Diffusion Susceptibility Testing of Yeast; Approved Guideline—Second Edition.Extent of recognition, process affected, and contact person.
    7-217CLSI M44-S3, Zone Diameter Interpretive Standards, Corresponding Minimal Inhibitory Concentration (MIC) Interpretive Breakpoints, and Quality Control Limits for Antifungal Disk Diffusion Susceptibility Testing of Yeasts; Third Informational SupplementExtent of recognition, process affected, and contact person.
    7-218CLSI M45-A2, Methods for Antimicrobial Dilution and Disk Susceptibility Testing of Infrequently Isolated or Fastidious Bacteria; Approved Guideline—Second EditionExtent of recognition and process affected.
    7-222CLSI M24-A2, Susceptibility Testing of Mycobacteria, Nocardiae and other Aerobic Actinomycetes; Approved Standards—Second EditionExtent of recognition, process affected, contact person, and title and type of standard.
    7-228CLSI M11-A8, Methods for Antimicrobial Susceptibility Testing of Anaerobic Bacteria; Approved Standard—Eighth EditionExtent of recognition, process affected, and contact person.
    7-229CLSI M02-A11, Performance Standards for Antimicrobial Disk Susceptibility Tests; Approved Standard—Eleventh EditionExtent of recognition, process affected, and contact person.
    7-230CLSI M07-A9, Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically; Approved Standard—Ninth EditionExtent of recognition, process affected, and contact person.
    7-2317-241CLSI M100-S23, Performance Standards for Antimicrobial Susceptibility Testing; Twenty-Third Informational SupplementWithdrawn and replaced with newer version.
    7-234CLSI EP24-A2, Assessment of the Diagnostic Accuracy of Laboratory Tests Using Receiver Operating Characteristic Curves; Approved Guideline—Second EditionExtent of recognition.
    H. Materials
    8-1228-335ASTM F2063-12 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical ImplantsWithdrawn and replaced with newer version.
    8-1478-336ASTM F562-13 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)Withdrawn and replaced with newer version.
    8-153ASTM F2119-07 (Reapproved 2013) Standard Test Method for Evaluation of MR Image Artifacts from Passive ImplantsReaffirmation.
    8-1548-337ASTM F621-12 Standard Specification for Stainless Steel Forgings for Surgical ImplantsWithdrawn and replaced with newer version.
    8-1568-338ASTM F139-12 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)Withdrawn and replaced with newer version.
    8-158ASTM F1713-08 (Reapproved 2013) Standard Specification for Wrought Titanium-13Niobium-13 Zirconium Alloy for Surgical Implant Applications (UNS R58130)Reaffirmation.
    8-1668-339ASTM F1091-12 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)Withdrawn and replaced with newer version.
    8-2038-340ASTM F2026-12 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant ApplicationsWithdrawn and replaced with newer version.
    8-2198-341ASTM F136-12a Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)Withdrawn and replaced with newer version.
    8-2228-342ASTM F1537-11 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)Withdrawn and replaced with newer version.
    8-3328-343ASTM F899-12b Standard Specification for Wrought Stainless Steels for Surgical InstrumentsWithdrawn and replaced with newer version.
    Start Printed Page 47708
    I. OB-GYN/Gastroenterology
    9-31ANSI/AAMI ID54:1996/(R)2012 Enteral feeding set adapters and connectorsReaffirmation.
    9-60IEC 60601-2-16 Edition 3.0 2008-04 Medical electrical equipment—Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltrationWithdrawn, see 9-80.
    9-61IEC 60601-2-18 Edition 3.0 2009-08 Medical electrical equipment—Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipmentTransition period extended.
    9-729-81ANSI/AAMI/IEC 60601-2-16:2012 Medical electrical equipment—Part 2-16: Particular requirements for basic safety and essential performance of hemodialysis, hemodiafiltration and hemofiltration equipmentNewer version with transition period.
    9-62IEC 60601-2-2 Edition 5.0 2009-02 Medical electrical equipment—Part 2-2: Particular requirements for the basic safety and essential performance of frequency surgical equipment and high frequency surgical accessoriesTransition period extended.
    9-63IEC 60601-2-16 (Third edition—2008), Medical electrical equipment—Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment CORRIGENDUM 1Withdrawn, see 9-80.
    9-64ANSI/AAMI/IEC 60601-2-2:2009 Medical electrical equipment—Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgery equipment and high frequency surgical accessoriesTransition period extended.
    9-80IEC 60601-2-16 Edition 4.0 2012-03 Medical electrical equipment—Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipmentTransition period extended.
    J. Ophthalmic
    10-1510-77ISO 9394 Third edition 2012-10-01 Ophthalmic optics—Contact lenses and contact lens care products—Determination of biocompatibility by ocular study with rabbit eyesWithdrawn and replaced with newer version.
    10-3610-78ISO 11979-3 Third edition 2012-12-01 Ophthalmic implants—Intraocular lenses—Part 3: Mechanical properties and test methodsWithdrawn and replaced with newer version.
    10-4010-79ISO 11979-1 Third edition 2012-09-15 Ophthalmic implants—Intraocular lenses—Part 1: VocabularyWithdrawn and replaced with newer version.
    10-4510-80ISO 18369-2 Second edition 2012-12-01 Ophthalmic optics—Contact lenses—Part 2: TolerancesWithdrawn and replaced with newer version.
    10-56ANSI Z80.12-2007 (R2012) American National Standard for Ophthalmics—Multifocal Intraocular LensesReaffirmation.
    10-57ANSI Z80.13-2007 (R2012) American National Standard for Ophthalmics—Phakic Intraocular LensesReaffirmation.
    10-76ISO 11979-8 Second edition 2006-07-01 AMENDMENT 1 2011-05-15 Ophthalmic implants—Intraocular lenses—Part 8: Fundamental requirementsWithdrawn.
    K. Orthopedics
    11-7311-252ISO 5838-1 Third edition 2013-03-01 Implants for surgery—Metallic skeletal pins and wires—Part 1: General requirementsWithdrawn and replaced with a newer version.
    11-20611-253ASTM F1800-12 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint ReplacementsWithdrawn and replaced with a newer version.
    11-20811-254ISO 14630 Fourth edition 2012-12-01 Non-active surgical implants—General requirementsWithdrawn and replaced with a newer version.
    11-213ASTM F1223-08 (Reapproved 2012) Standard Test Method for Determination of Total Knee Replacement ConstraintReaffirmation.
    11-215ASTM F897-02 (Reapproved 2013) Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and ScrewsReaffirmation.
    11-242ASTM F1839-08 (Reapproved 2012) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and InstrumentsReaffirmation.
    11-24611-255ASTM F1717-13 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy ModelWithdrawn and replaced with a newer version.
    L. Physical Medicine
    16-2416-190ISO 7176-11 Second edition 2012-12-01 Wheelchairs—Part 11: Test dummiesWithdrawn and replaced with a newer version.
    Start Printed Page 47709
    16-2816-191ISO 7176-16 Second edition 2012-12-01 Wheelchairs—Part 16: Resistance to ignition of postural support devicesWithdrawn and replaced with a newer version.
    16-5016-192ISO 7176-3 Third edition 2012-12-15 Wheelchairs—Part 3: Determination of effectiveness of brakesWithdrawn and replaced with a newer version.
    M. Radiology
    12-3412-201IEC 60601-2-54 Edition 1.0 2009-06 Medical electrical equipment—Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopyNewer version with transition period.
    12-5412-254IEC 60601-2-8 Edition 2.0 2010-11 Medical electrical equipment—Part 2-8: Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MVNewer version with extended transition period.
    12-12712-201IEC 60601-2-54 Edition 1.0 2009-06 Medical electrical equipment—Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopyNewer version with transition period.
    12-13312-255IEC 60601-2-11 Edition 3.0 2013-01 Medical electrical equipment—Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipmentNewer version with transition period.
    12-202IEC 60601-2-43 Edition 2.0 2010-03 Medical electrical equipment—Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional proceduresTransition period extended.
    12-20312-256IEC 60601-2-44 Edition 3.1 2012-09 Medical electrical equipment—Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomographyNewer version with extended transition period.
    12-204IEC 60601-2-28 Edition 2.0 2010-03 Medical electrical equipment—Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosisTransition period extended.
    12-205IEC 60601-2-5 Edition 3.0 2009-07 Medical electrical equipment—Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipmentTransition period extended.
    12-206IEC 60601-2-1 Edition 3.0 2009-10 Medical electrical equipment—Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeVTransition period extended.
    12-207IEC 60601-2-33 Edition 3.0 2010-03 Medical electrical equipment—Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosticTransition period extended.
    12-208IEC 60601-2-22 Third Edition 2007-05 Medical electrical equipment—Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipmentTransition period extended.
    12-209IEC 60601-2-37 Edition 2.0 2007-08 Medical electrical equipment—Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipmentTransition period extended.
    12-210IEC 60601-1-3 Edition 2.0 2008-01 Medical electrical equipment—Part 1-3: General requirements for basic safety and essential performance—Collateral Standard: Radiation protection in diagnostic X-ray equipmentTransition period extended.
    12-211IEC 60601-2-29 Edition 3.0 2008-06 Medical electrical equipment Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulatorsTransition period extended.
    12-224IEC 60601-2-44 (Third edition -2009) Medical electrical equipment—Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography CORRIGENDUM 1Withdrawn, see 12-256.
    12-236IEC 60601-2-45 Edition 3.0 2011-02 Medical electrical equipment—Part 2-45: Particular requirements for the safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devicesTransition period extended.
    12-250IEC 60601-2-44 Edition 3.0 2012-08 Amendment 1 Medical electrical equipment—Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomographyWithdrawn, see 12-256.
    N. Sterility
    14-6414-378ASTM F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye PenetrationWithdrawn and replaced with newer version.
    Start Printed Page 47710
    14-230ASTM F2203-02 (Reapproved 2012) Standard Test Method for Linear Measurement Using Precision Steel RuleReaffirmation.
    14-231ASTM F2217-02 (Reapproved 2012) Standard Practice for Coating/Adhesive Weight DeterminationReaffirmation.
    14-235ASTM F1140 -07 (Reapproved 2012) Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained PackagesReaffirmation.
    14-236ASTM F2054-07 (Reapproved 2012) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining PlatesReaffirmation.
    14-24414-379ISO 14644-8 Second edition 2013-02-15 Cleanrooms and associated controlled environments—Part 8: Classification of air cleanliness by chemical concentration (ACC)Withdrawn and replaced with newer version.
    14-264ANSI/AAMI ST8:2008 Hospital steam sterilizersContact person.
    14-275ANSI/AAMI ST41:2008/(R)2012 Ethylene oxide sterilization in health care facilities: Safety and effectivenessReaffirmation.
    14-28114-380ASTM F17-12 Standard Terminology Relating to Flexible Barrier PackagingWithdrawn and replaced with newer version.
    14-295ANSI/AAMI ST81:2004/(R)2010 Sterilization of medical devices—Information to be provided by the manufacturer for the processing of resterilizable medical devicesRelevant guidance.
    14-311ANSI/AAMI ST55:2010 Table-top steam sterilizersContact person
    14-31214-394ANSI/AAMI ST79:2010 & A1:2010 & A2:2011 & A3:2012 (Consolidated Text) Comprehensive guide to steam sterilization and sterility assurance in health care facilitiesWithdrawn and replaced with newer version.
    14-341ASTM E2303-11 €1 Standard Guide for Absorbed-Dose Mapping in Radiation Processing FacilitiesEditorial change.
    14-34514-381ISO/ASTM 51261 Second edition 2013-04-15 Practice for calibration of routine dosimetry systems for radiation processingWithdrawn and replaced with newer version.
    14-34614-382ISO/ASTM 51276 Third edition 2012-07-15 Practice for use of a polymethylmethacrylate dosimetry systemWithdrawn and replaced with newer version.
    14-34714-383ISO/ASTM 51702 Third edition 2013-04-15 Practice for dosimetry in a gamma facility for radiation processingWithdrawn and replaced with newer version.
    14-349ANSI/AAMI/ISO 13408-3:2006/(R)2012 Aseptic processing of health care products—Part 3: LyophilizationReaffirmation.
    14-350ANSI/AAMI/ISO 13408-4:2005/(R)2012 Aseptic processing of health care products—Part 4: Clean-in-place technologiesReaffirmation.
    14-351ANSI/AAMI/ISO 13408-5:2006/(R)2012 Aseptic processing of health care products—Part 5: Sterilization in placeReaffirmation.
    O. Tissue Engineering
    15-515-37ASTM F2347—11 Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product ApplicationsWithdrawn and replaced with newer version.
    15-14ASTM F2603 −06 (Reapproved 2012) Standard Guide for Interpreting Images of Polymeric Tissue ScaffoldsReaffirmation.
    15-29ASTM F2259 −10 (Reapproved 2012) €1 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1 H NMR) SpectroscopyReaffirmation.
    15-32ASTM F2260 −03 (Reapproved 2012) €1 Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1 H NMR) SpectroscopyReaffirmation.
    1 All standard titles in this table conform to the style requirements of the respective organizations.

    III. Listing of New Entries

    In table 2, FDA provides the listing of new entries and consensus standards added as modifications to the list of recognized standards under Recognition List Number: 031.

    Table 2—New Entries to the List of Recognized Standards

    Recognition No.Title of standard 1Reference No. and Date
    A. Anesthesia
    1-90Oxygen concentrators for medical use—Safety requirementsISO 8359 Second edition 1996-12-15 Amendment 1 2012-07-01
    Start Printed Page 47711
    1-92Sleep apnoea breathing therapy—Part 2: Masks and application accessoriesISO 17510-2 Second edition 2007-10-01
    B. Dental/ENT
    4-205Dentistry—Handpieces and motorsISO 14457 First edition 2012-09-15
    C. General
    5-75Medical devices—Symbols to be used with medical device labels, labeling, and information to be supplied—Part 1: General requirementsANSI/AAMI/ISO 15223-1 2012
    D. In Vitro Diagnostics
    7-242Hemolysis, Icterus, and Lipemia/Turbidity Indices as Indicators of Interference in Clinical Laboratory Analysis; Approved GuidelineCLSI C56-A
    7-243Method for Antifungal Disk Diffusion Susceptibility Testing of Nondermatophyte Filamentous Fungi; Approved GuidelineCLSI M51-A
    E. Neurology
    17-11Medical electrical equipment—Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulatorsIEC 60601-2-10 Edition 2.0 2012-06
    F. Radiology
    12-251Medical electrical equipment—Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipmentIEC 60601-2-63 Edition 1.0 2012-09
    12-252Medical electrical equipment—Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipmentIEC 60601-2-65 Edition 1.0 2012-09
    12-253Medical electrical equipment—Medical electron accelerators—Functional performance characteristicsIEC 60976 Edition 2.0 2007-10
    G. Software/Informatics
    13-37Laboratory Automation: Data Content for Specimen Identification; Approved StandardNCCLS AUTO7-A
    H. Sterility
    14-384Biological evaluation of medical devices—Part 7: Ethylene oxide sterilization residualsISO 10993-7:2008 TECHNICAL CORRIGENDUM 1 Published 2009-11-15
    14-385Aseptic processing of health care products—Part 1: General requirementsANSI/AAMI/ISO 13408-1:2008/(R2011)
    14-386Aseptic processing of health care products—Part 1: General requirementsISO 13408-1 Second edition 2008-06-15
    14-387Aseptic processing of health care products—Part 7: Alternate processes for medical devices and combination productsANSI/AAMI/ISO 13408-7:2012
    14-388Aseptic processing of health care products—Part 7: Alternate processes for medical devices and combination productsISO 13408-7 First edition 2012-08-01
    14-389Cleanrooms and associated controlled environments—Part 9: Classification of surface cleanliness by particle concentrationISO 14644-9 First edition 2012-08-15
    14-390Cleanrooms and associated controlled environments—Part 10: Classification of surface cleanliness by chemical concentrationISO 14644-10 First edition 2013-03-01
    14-391Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processingISO/ASTM 51608 Second edition 2005-05-15
    14-392Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeVISO/ASTM 51649 Second edition 2005-05-15
    14-393Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keVISO/ASTM 51818 Second edition 2009-06-15
    I. Tissue Engineering
    15-38Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant ApplicationsATSM F2883—11
    1 All standard titles in this table conform to the style requirements of the respective organizations.

    IV. List of Recognized Standards

    FDA maintains the Agency's current list of FDA recognized consensus standards in a searchable database that may be accessed directly at FDA's Internet site at http://www.accessdata.fda.gov/​scripts/​cdrh/​cfdocs/​cfStandards/​search.cfm. FDA will incorporate the modifications and revisions described in this notice into the database and, upon publication in the Federal Register, this recognition of consensus standards will be effective. FDA will announce additional modifications and revisions to the list of Start Printed Page 47712recognized consensus standards, as needed, in the Federal Register once a year, or more often, if necessary. Beginning with Recognition List Number: 033, FDA will no longer be announcing minor revisions to the list of recognized consensus standards such as technical contact person, relevant guidance, processes affected, CFR citations, and product codes.

    V. Recommendation of Standards for Recognition by FDA

    Any person may recommend consensus standards as candidates for recognition under section 514 of the FD&C Act by submitting such recommendations, with reasons for the recommendation, to the contact person (see FOR FURTHER INFORMATION CONTACT). To be properly considered, such recommendations should contain, at a minimum, the following information: (1) Title of the standard; (2) any reference number and date; (3) name and address of the national or international standards development organization; (4) a proposed list of devices for which a declaration of conformity to this standard should routinely apply; and (5) a brief identification of the testing or performance or other characteristics of the device(s) that would be addressed by a declaration of conformity.

    VI. Electronic Access

    You may obtain a copy of “Guidance on the Recognition and Use of Consensus Standards” by using the Internet. The Center for Devices and Radiological Health (CDRH) maintains a site on the Internet for easy access to information including text, graphics, and files that you may download to a personal computer with access to the Internet. Updated on a regular basis, the CDRH home page includes the guidance as well as the current list of recognized standards and other standards-related documents. After publication in the Federal Register, this notice announcing “Modification to the List of Recognized Standards, Recognition List Number: 031” will be available on the CDRH home page. You may access the CDRH home page at http://www.fda.gov/​MedicalDevices.

    You may access “Guidance on the Recognition and Use of Consensus Standards,” and the searchable database for “FDA Recognized Consensus Standards” at http://www.fda.gov/​MedicalDevices/​DeviceRegulationandGuidance/​Standards.

    This Federal Register document on modifications in FDA's recognition of consensus standards is available at http://www.fda.gov/​MedicalDevices/​DeviceRegulationandGuidance/​Standards/​ucm123792.htm.

    VII. Submission of Comments and Effective Date

    Interested persons may submit to the contact person (see FOR FURTHER INFORMATION CONTACT) either electronic or written comments regarding this document. It is only necessary to send one set of comments. Comments are to be identified with the docket number found in brackets in the heading of this document. FDA will consider any comments received in determining whether to amend the current listing of modifications to the list of recognized standards, Recognition List Number: 031. These modifications to the list of recognized standards are effective upon publication of this notice in the Federal Register.

    Start Signature

    Dated: July 31, 2013.

    Leslie Kux,

    Assistant Commissioner for Policy.

    End Signature End Supplemental Information

    [FR Doc. 2013-19019 Filed 8-5-13; 8:45 am]

    BILLING CODE 4160-01-P

Document Information

Published:
08/06/2013
Department:
Food and Drug Administration
Entry Type:
Notice
Action:
Notice.
Document Number:
2013-19019
Dates:
Submit written or electronic comments concerning this document at any time. See section VII for the effective date of the recognition of standards announced in this document.
Pages:
47703-47712 (10 pages)
Docket Numbers:
Docket No. FDA-2004-N-0451
PDF File:
2013-19019.pdf
Supporting Documents:
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 058
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 056
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 054
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 053
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 052
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 051
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 049
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 047
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 043
» Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 041