2014-17445. SGS North America, Inc.: Application for Expansion of Recognition  

  • Start Preamble

    AGENCY:

    Occupational Safety and Health Administration (OSHA), Labor.

    ACTION:

    Notice.

    SUMMARY:

    In this notice, OSHA announces the application of SGS North America, Inc., for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) under 29 CFR 1910.7, and presents the Agency's preliminary finding to grant the application.

    Start Printed Page 43098

    DATES:

    Submit comments, information, and documents in response to this notice, or requests for an extension of time to make a submission, on or before August 8, 2014.

    ADDRESSES:

    Submit comments by any of the following methods:

    1. Electronically: Submit comments and attachments electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for making electronic submissions.

    2. Facsimile: If submissions, including attachments, are not longer than 10 pages, commenters may fax them to the OSHA Docket Office at (202) 693-1648.

    3. Regular or express mail, hand delivery, or messenger (courier) service: Submit comments, requests, and any attachments to the OSHA Docket Office, Docket No. OSHA-2006-0040, Technical Data Center, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-5627). Note that security procedures may result in significant delays in receiving comments and other written materials by regular mail. Contact the OSHA Docket Office for information about security procedures concerning delivery of materials by express mail, hand delivery, or messenger service. The hours of operation for the OSHA Docket Office are 8:15 a.m.-4:45 p.m., e.t.

    4. Instructions: All submissions must include the Agency name and the OSHA docket number (OSHA-2006-0040). OSHA places comments and other materials, including any personal information, in the public docket without revision, and these materials will be available online at http://www.regulations.gov. Therefore, the Agency cautions commenters about submitting statements they do not want made available to the public, or submitting comments that contain personal information (either about themselves or others) such as Social Security numbers, birth dates, and medical data.

    5. Docket: To read or download submissions or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Contact the OSHA Docket Office for assistance in locating docket submissions.

    6. Extension of comment period: Submit requests for an extension of the comment period on or before August 8, 2014 to the Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-1644.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Information regarding this notice is available from the following sources:

    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; email: Meilinger.francis2@dol.gov.

    General and technical information: Contact Mr. David W. Johnson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone: (202) 693-2110 or email: johnson.david.w@dol.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Notice of the Application for Expansion

    The Occupational Safety and Health Administration is providing notice that SGS North America, Inc. (SGS), is applying for expansion of its current recognition as an NRTL. SGS requests the addition of eight test standards to its NRTL scope of recognition.

    OSHA recognition of an NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by its applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.

    The Agency processes applications by an NRTL for initial recognition, and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding. In the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL, including SGS, which details the NRTL's scope of recognition. These pages are available from the OSHA Web site at http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

    SGS currently has one facility (site) recognized by OSHA for product testing and certification, with its headquarters located at: SGS North America, Inc., 620 Old Peachtree Road, Suwanee, Georgia 30024. A complete list of SGS's scope of recognition is available at http://www.osha.gov/​dts/​otpca/​nrtl/​sgs.html.

    II. General Background on the Application

    SGS submitted an application, dated June 26, 2013 (Exhibit 14-1—SGS Request for Expansion), to expand its recognition to include five additional test standards. SGS submitted an amendment to the application on July 17, 2013 (Exhibit 14-2—SGS Request for Additional Test Standards), requesting three additional test standards for inclusion in the expansion request, for a total of eight additional requested test standards. OSHA staff performed a detailed analysis of the application file and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

    Table 1 below lists the appropriate test standards found in SGS's application for expansion for testing and certification of products under the NRTL Program.

    Table 1—Proposed List of Appropriate Test Standards for Inclusion in SGS's NRTL Scope of Recognition

    Test standardTest standard title
    UL 48Electric Signs.
    UL 65Wired Cabinets.
    UL 73Motor-Operated Appliances.
    Start Printed Page 43099
    UL 153Portable Electric Luminaires.
    UL 482Portable Sun/Heat Lamps.
    UL 507Electric Fans.
    UL 508AIndustrial Control Panels.
    UL 60335-1Safety of Household and Similar Electrical Appliances, Part 1: General Requirements.

    III. Preliminary Findings on the Application

    SGS submitted an acceptable application for expansion of its scope of recognition. OSHA's review of the application file and pertinent documentation indicate that SGS can meet the requirements prescribed by 29 CFR 1910.7 for expanding its recognition to include the addition of the eight test standards for NRTL testing and certification listed above. This preliminary finding does not constitute an interim or temporary approval of SGS's application.

    OSHA welcomes public comment as to whether SGS meets the requirements of 29 CFR 1910.7 for expansion of its recognition as an NRTL. Comments should consist of pertinent written documents and exhibits. Commenters needing more time to comment must submit a request in writing, stating the reasons for the request. Commenters must submit the written request for an extension by the due date for comments. OSHA will limit any extension to 10 days unless the requester justifies a longer period. OSHA may deny a request for an extension if the request is not adequately justified. To obtain or review copies of the publicly available information in SGS's application, including pertinent documents (e.g., exhibits) and all submitted comments, contact the Docket Office, Room N-2625, Occupational Safety and Health Administration, U.S. Department of Labor, at the above address; these materials also are available online at http://www.regulations.gov under Docket No. OSHA-2006-0040.

    OSHA staff will review all comments to the docket submitted in a timely manner and, after addressing the issues raised by these comments, will recommend to the Assistant Secretary for Occupational Safety and Health whether to grant SGS's application for expansion of its scope of recognition. The Assistant Secretary will make the final decision on granting the application. In making this decision, the Assistant Secretary may undertake other proceedings prescribed in Appendix A to 29 CFR 1910.7. OSHA will publish a public notice of its final decision in the Federal Register.

    IV. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW., Washington, DC 20210, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

    Start Signature

    Signed at Washington, DC, on July 21, 2014.

    David Michaels,

    Assistant Secretary of Labor for Occupational Safety and Health.

    End Signature End Supplemental Information

    [FR Doc. 2014-17445 Filed 7-23-14; 8:45 am]

    BILLING CODE 4510-26-P