2016-18656. Aluminum Extrusions from the People's Republic of China: Final Results of Expedited First Sunset Review of the Countervailing Duty Order

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce

SUMMARY:

The Department of Commerce (the Department) finds that revocation of the countervailing duty (CVD) order on aluminum extrusions from the People's Republic of China (PRC) would likely lead to the continuation or recurrence of a countervailable subsidy at the levels indicated in the Final Results of Review section of this notice.

DATES:

Effective August 5, 2016.

FOR FURTHER INFORMATION CONTACT:

Tyler Weinhold, Office VI, AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: [phone].

SUPPLEMENTARY INFORMATION:

Background

On April 1, 2016, the Department initiated the first sunset review of the Order ^[1] on aluminum extrusions from the PRC, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).^[2] The Aluminum Extrusions Fair Trade Committee and its constituent producers of aluminum extrusions (Petitioners) filed a timely notice of intent to participate on April 18, 2016, in accordance with 19 CFR 351.218(d)(1).^[3] Petitioners claimed interested party status under section 771(9)(E) (covering trade and business associations) and individually under section 771(9)(C) (covering manufacturers, producers, and wholesalers) of the Act, respectively.

The Department received an adequate substantive response from Petitioners within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).^[4] The Department did not receive a substantive response from the Government of the PRC or any respondent interested party to the proceeding. Because the Department received no response from any respondent interested party, the Department conducted an expedited review of the Order, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(l)(ii)(B)(2) and (C)(2).

Scope of the Order

The merchandise covered by the order{s} is aluminum extrusions which are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by The Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, the subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 1 contains not less than 99 percent aluminum by weight. The subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 3 contains manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. The subject merchandise is made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by weight. The subject aluminum extrusions are properly identified by a four-digit alloy series without either a decimal point or leading letter. Illustrative examples from among the approximately 160 registered alloys that may characterize the subject merchandise are as follows: 1350, 3003, and 6060.

Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (drawn aluminum) are also included in the scope.

Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including brightdip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof. Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods `kit' defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.

Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation. The following aluminum extrusion products are excluded: Aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7 and containing in excess of 2.0 percent zinc by weight.

The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels. The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a “finished goods kit.” A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled “as is” into a finished product. An imported product will not be considered a “finished goods kit” and therefore excluded from the scope of the investigation merely by including fasteners such as screws, bolts, etc. in the packaging with an aluminum extrusion product.

The scope also excludes aluminum alloy sheet or plates produced by other than the extrusion process, such as aluminum products produced by a method of casting. Cast aluminum products are properly identified by four digits with a decimal point between the third and fourth digit. A letter may also precede the four digits. The following Aluminum Association designations are representative of aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 712.0. The scope also excludes pure, unwrought aluminum in any form. The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) Length of 37 millimeters (“mm”) or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.

Also excluded from the scope of this order are finished heat sinks. Finished heat sinks are fabricated heat sinks made from aluminum extrusions the design and production of which are organized around meeting certain specified thermal performance requirements and which have been fully, albeit not necessarily individually, tested to comply with such requirements.

Imports of the subject merchandise are provided for under the following categories of the Harmonized Tariff Schedule of the United States (HTSUS): 8424.90.9080, 9405.99.4020, 9031.90.90.95, 7616.10.90.90, 7609.00.00, 7610.10.00, 7610.90.00, 7615.10.30, 7615.10.71, 7615.10.91, 7615.19.10, 7615.19.30, 7615.19.50, 7615.19.70, 7615.19.90, 7615.20.00, 7616.99.10, 7616.99.50, 8479.89.98, 8479.90.94, 8513.90.20, 9403.10.00, 9403.20.00, 7604.21.00.00, 7604.29.10.00, 7604.29.30.10, 7604.29.30.50, 7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 7608.20.00.90, 8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 8302.10.60.90, 8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 8302.41.30.00, 8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 8302.41.60.80, 8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 8302.49.60.35, 8302.49.60.45, 8302.49.60.55, 8302.49.60.85, 8302.50.00.00, 8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 8414.59.60.90, 8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 8418.99.80.60, 8419.90.10.00, 8422.90.06.40, 8473.30.20.00, 8473.30.51.00, 8479.90.85.00, 8486.90.00.00, 8487.90.00.80, 8503.00.95.20, 8508.70.00.00, 8515.90.20.00, 8516.90.50.00, 8516.90.80.50, 8517.70.00.00, 8529.90.73.00, 8529.90.97.60, 8536.90.80.85, 8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 8708.80.65.90, 8803.30.00.60, 9013.90.50.00, 9013.90.90.00, 9401.90.50.81, 9403.90.10.40, 9403.90.10.50, 9403.90.10.85, 9403.90.25.40, 9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 9403.90.40.60, 9403.90.50.05, 9403.90.50.10, 9403.90.50.80, 9403.90.60.05, 9403.90.60.10, 9403.90.60.80, 9403.90.70.05, 9403.90.70.10, 9403.90.70.80, 9403.90.80.10, 9403.90.80.15, 9403.90.80.20, 9403.90.80.41, 9403.90.80.51, 9403.90.80.61, 9506.11.40.80, 9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 9506.70.20.90, 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 9506.99.20.00, 9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 9506.99.60.80, 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 9507.90.60.00, and 9603.90.80.50.

The subject merchandise entered as parts of other aluminum products may be classifiable under the following additional Chapter 76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as well as under other HTSUS chapters. In addition, fin evaporator coils may be classifiable under HTSUS numbers: 8418.99.80.50 and 8418.99.80.60. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this Order is dispositive.

Analysis of Comments Received

All issues raised in this review are addressed in the Issues and Decision Memorandum, which is dated concurrently with and adopted by this notice.^[5] The issues discussed in the Issues and Decision Memorandum include the likelihood of continuation or recurrence of a countervailable subsidy and the net countervailable subsidy likely to prevail if the Order were revoked. Parties can find a complete discussion of all issues raised in this expedited sunset review and the corresponding recommendations in this public memorandum, which is on file electronically via the Enforcement and Compliance Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov and to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly on the Internet at http://enforcement.trade.gov/​frn/​index.html. The signed Issues and Decision Memorandum and the electronic versions of the Issues and Decision Memorandum are identical in content.

Final Results of Review

Pursuant to sections 752(b)(1) and (3) of the Act, we determine that revocation of the Order on aluminum extrusions from the PRC would be likely to lead to continuation or recurrence of a net countervailable subsidy at the rates listed below: ^[6]

Manufacturers/producers/exporters	Net countervailable subsidy rate (percent)
Dragonluxe Limited	374.15
Foshan Guangcheng Aluminum Co., Ltd., Guang Ya Aluminum Industries Co. Ltd., Guang Ya Aluminum Industries Hong Kong, and Yongji Guanghai Aluminum Industry Co., Ltd	12.05
Kong Ah International Company Limited	7 25.83
Karlton Aluminum Company Ltd., Zhaoqing New Zhongya Aluminum Co., Ltd., Zhongya Shaped Aluminum HK Holding Ltd	20.78
Liaoyang Zhongwang Aluminum Profile Co. Ltd./Liaoning Zhongwang Group	374.15
Miland Luck Limited	374.15
All-Others	23.26

Notification Regarding Administrative Protective Order

This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

The Department is issuing and publishing these final results and this notice in accordance with sections 751(c), 752(b), and 777(i)(1) of the Act.

Dated: August 1, 2016.

Gary Taverman,

Associate Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations.

Footnotes

1.  See Aluminum Extrusions from the People's Republic of China: Countervailing Duty Order, 76 FR 30653 (May 26, 2011) (the Order).

2.  See Initiation of Five-Year (“Sunset”) Review, 81 FR 18829 (April 1, 2016).

3.  See Letter from Petitioner to the Department, “Aluminum Extrusions from the People's Republic of China: Notice of Intent to Participate in Review,” dated April 18, 2016.

4.  See Letter to the Department, “Aluminum Extrusions from the People's Republic of China: AEFTC's Substantive Response to the Department's Notice of Initiation of its Five-Year (“Sunset”) Review,” dated May 2, 2016.

5.  See Memorandum from Brian Davis, Program Manager, Office VI, to Gary Taverman, Associate Deputy Assistant Secretary for Enforcement and Compliance regarding: “Issues and Decision Memorandum for the Final Results of the Expedited Sunset Review of the Countervailing Duty Order on Aluminum Extrusions from the People's Republic of China,” dated concurrently with and adopted by this Notice (Issues and Decision Memorandum).

6.  Id.

7.  Kong Ah Kong Ah International Company Limited was included among the cross-owned companies comprising the Gyang Ya Group in the Final Determination. However, other members of the Gyang Ya Group were subsequently reviewed as mandatory respondents as cross-owned affiliates in the Third (2013) Review, while Kong Ah International Company Limited was not. Therefore, the rates for the additional programs found to be countervailable for the individually-examined Guang Ya Group Companies in the Third (2013) Review are not the rates for Kong Ah International Company Limited. Rather, for additional programs found to be countervailable in the Third (2013) Review, we have used the average of the rates of the companies individually examined.