2021-08793. Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel From Italy: Final Results of Antidumping Duty Administrative Review; 2017-2019

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) determines that certain cold-drawn mechanical tubing of carbon and alloy steel (cold-drawn mechanical tubing) from Italy was sold in the United States at less than normal value during the period of review (POR) November 22, 2017, through May 31, 2019.

DATES:

Applicable April 28, 2021.

FOR FURTHER INFORMATION CONTACT:

Robert Scully, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington DC 20230; telephone: [phone].

SUPPLEMENTARY INFORMATION:

Background

On October 23, 2020, Commerce published the Preliminary Results.^[1] Commerce extended the deadline for the final results by 60 days on January 13, 2021.^[2] The deadline for the final results of this review is now April 21, 2021. For a complete description of the events that occurred since the Preliminary Results, see the Issues and Decision Memorandum.^[3]

Scope of the Order

The products covered by this order are certain cold-drawn mechanical tubing of carbon and alloy steel products from Italy. For a full description of the scope, see the Issues and Decision Memorandum.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs are addressed in the Issues and Decision Memorandum. A list of the issues that parties raised and to which we responded in the Issues and Decision Memorandum is attached to this notice as an Appendix. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​index.html/​.

Changes Since the Preliminary Results

Based on a review of the record and comments received from interested parties, we made changes to the programming language to correct two errors.^[4]

Final Results of the Review

Commerce determines that the following weighted-average dumping margin exists for the period November 22, 2017, through May 31, 2019:

Exporter/producer	Weighted- average dumping margin (percent)
Dalmine S.p.A	10.99

Assessment Rate

Pursuant to section 751(a)(2)(A) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.212(b)(1), Commerce shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries covered by this review.

Because Dalmine's weighted-average dumping margin is not zero or de minimis (i.e., less than 0.5 percent), Commerce has calculated importer-specific antidumping duty assessment rates. We calculated importer-specific antidumping duty assessment rates by aggregating the total amount of dumping calculated for the examined sales of each importer and dividing each of these amounts by the total sales value associated with those sales. Where either the respondent's weighted-average dumping margin is zero or de minimis within the meaning of 19 CFR 351.106(c)(1), or an importer-specific assessment rate is zero or de minimis, we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties.

For entries of subject merchandise during the POR produced by Dalmine for which it did not know its merchandise was destined for the United States, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction.^[5]

We intend to instruct CBP to take into account the “provisional measures deposit cap,” in accordance with 19 CFR 351.212(d).

Consistent with its recent notice,^[6] Commerce intends to issue assessment instructions to CBP no earlier than 35 days after the date of publication of the final results of this review in the Federal Register. If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired (i.e., within 90 days of publication).

Cash Deposit Requirements

The following cash deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for Dalmine will be the rate established in the final results of this administrative review; (2) for merchandise exported by producers or exporters not covered in this administrative review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding; (3) if the exporter is not a firm covered in this review or the original less-than-fair-value (LTFV) investigation, but the producer is, the cash deposit rate will be the rate established for the most recently-completed segment of this proceeding for the producer of the subject merchandise; and (4) the cash deposit rate for all other producers or exporters will continue to be 47.87 percent,^[7] the all-others rate established in the LTFV investigation. These cash deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties has occurred and the subsequent assessment of double antidumping duties.

Administrative Protective Order

This notice also serves as a final reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return/destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

Notification to Interested Parties

We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(5) and 19 CFR 351.213(h)(1).

Dated: April 21, 2021.

Christian Marsh,

Acting Assistant Secretary for Enforcement and Compliance.

Appendix

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary

II. Background

III. Scope of the Order

IV. Changes Since the Preliminary Results

V. Discussion of the Issues

Comment 1: Dalmine's Cutting Costs

Comment 2: Major Input Adjustment for Hollows

Comment 3: Correct Level of Trade (LOT) Variables

Comment 4: Ministerial Error Regarding Inventory Carrying Costs

VI. Recommendation

Footnotes

1.  See Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel from Italy: Preliminary Results of the Administrative Review of the Antidumping Duty Order; 2017-2019, 85 FR 67509 (October 23, 2020) (Preliminary Results), and accompanying Preliminary Decision Memorandum.

2.  See Memorandum, “Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel from Italy: Extension of Deadline for Final Results of Antidumping Duty Administrative Review, 2017-2019,” dated January 13, 2021.

3.  See Memorandum, “Issues and Decision Memorandum for the Final Results of the 2017-2019 Administrative Review of the Antidumping Duty Order on Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel from Italy,” dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum).

4.  Id. at Comments 3 and 4.

5.  For a full discussion of this practice, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003).

6.  See Notice of Discontinuation of Policy to Issue Liquidation Instructions After 15 Days in Applicable Antidumping and Countervailing Duty Administrative Proceedings, 86 FR 3995 (January 15, 2021).

7.  See Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel from the People's Republic of China, the Federal Republic of Germany, India, Italy, The Republic of Korea, and Switzerland: Antidumping Duty Orders; and Amended Final Determinations of Sales at Less Than Fair Value for the People's Republic of China and Switzerland, 83 FR 26962 (June 11, 2018).