2022-19807. Airworthiness Directives; Bombardier, Inc., Airplanes

AGENCY:

Federal Aviation Administration (FAA), Department of Transportation (DOT).

ACTION:

Final rule.

SUMMARY:

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a determination that the baggage bay line fire extinguishing tube assembly might not have been installed with the correct torque. This AD requires re-torqueing the baggage bay line fire extinguishing tube assembly to the correct torque values, and applying corrosion inhibiting compound on the discharge tubes. The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective October 20, 2022.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 20, 2022.

ADDRESSES:

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2022-0687; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

• For service information identified in this final rule, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone [phone]; email [e-mail]; website bombardier.com.

• You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2022-0687.

FOR FURTHER INFORMATION CONTACT:

Elizabeth Dowling, Aerospace Engineer, Mechanical Systems and Administrative Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone [phone]; email [e-mail].

SUPPLEMENTARY INFORMATION:

Background

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model BD-700-2A12 airplanes. The NPRM published in the Federal Register on June 21, 2022 (87 FR 36773). The NPRM was prompted by TCCA AD CF-2021-48, dated December 15, 2021, issued by Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada (referred to after this as the MCAI). The MCAI states that the baggage bay line fire extinguishing tube assembly may not have been installed in production with the correct torque. Although the baggage bay is accessible to the crew during flight with portable fire extinguishers, incorrect torqueing of the baggage bay line fire extinguishing tube assembly could lead to loss of the built-in fire extinguishing system for the baggage bay.

In the NPRM, the FAA proposed to require re-torqueing the baggage bay line fire extinguishing tube assembly to the correct torque values, and applying corrosion inhibiting compound on the discharge tubes. The FAA is issuing this AD to address the unsafe condition on these products.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2022-0687.

Discussion of Final Airworthiness Directive

Comments

The FAA received no comments on the NPRM or on the determination of the cost to the public.

Conclusion

This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Related Service Information Under 1 CFR Part 51

Bombardier Inc. has issued Service Bulletin 700-26-7503, dated April 22, 2021. This service information describes procedures for re-torqueing the baggage bay line fire extinguishing tube assembly to the correct torque values, and applying corrosion inhibiting compound on the discharge tubes. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

The FAA estimates that this AD affects 42 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

Estimated Costs for Required Actions

Labor cost	Parts cost	Cost per product	Cost on U.S. operators
1 work-hour × $85 per hour = $85	$5	$90	$3,780

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

2022-18-10 Bombardier, Inc.: Amendment 39-22161; Docket No. FAA-2022-0687; Project Identifier MCAI-2021-01405-T.

(a) Effective Date

This airworthiness directive (AD) is effective October 20, 2022.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Bombardier, Inc., Model BD-700-2A12 airplanes, certificated in any category, serial numbers (S/Ns) 70006 through 70044 inclusive, S/Ns 70046 through 70052 inclusive, and S/Ns 70055, 70056, and 70062.

(d) Subject

Air Transport Association (ATA) of America Code 26, Fire protection.

(e) Unsafe Condition

This AD was prompted by a determination that the baggage bay line fire extinguishing tube assembly might not have been installed with the correct torque. The FAA is issuing this AD to address improper torqueing, which may lead to loss of the fire extinguishing system, which could prevent extinguishing a fire and possibly result in damage to the airplane and injury to occupants.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Re-Torque Fire Extinguishing Tube Assembly

Within 28 months after the effective date of this AD: Re-torque the baggage bay line fire extinguishing tube assembly to the correct torque values, and apply corrosion inhibiting compound on the discharge tubes, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 700-26-7503, dated April 22, 2021.

(h) No Reporting Requirement

Although Bombardier Service Bulletin 700-26-7503, dated April 22, 2021, specifies to submit certain information to the manufacturer, this AD does not include that requirement.

(i) Other AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, New York ACO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the certification office, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone [phone]. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, New York ACO Branch, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.

(j) Additional Information

(1) Refer to TCCA AD CF-2021-48, dated December 15, 2021, for related information. This TCCA AD may be found in the AD docket at regulations.gov by searching for and locating Docket No. FAA-2022-0687.

(2) For more information about this AD, contact Elizabeth Dowling, Aerospace Engineer, Mechanical Systems and Administrative Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone [phone]; email [e-mail].

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) Bombardier Service Bulletin 700-26-7503, dated April 22, 2021.

(ii) [Reserved]

(3) For service information identified in this AD, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone [phone]; email [e-mail]; website bombardier.com.

(4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email [e-mail], or go to: archives.gov/federal-register/cfr/ibr-locations.html.

Issued on August 19, 2022.

Christina Underwood,

Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service.