-
Start Preamble
Start Printed Page 68616
AGENCY:
Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION:
Final rule.
SUMMARY:
The FAA is superseding Airworthiness Directive (AD) 2017-10-17, which applied to certain Airbus SAS Model A330-200; A330-200 Freighter; and A330-300 series airplanes. AD 2017-10-17 required revising the existing maintenance or inspection program, as applicable, to incorporate new fuel airworthiness limitations. This AD was prompted by a determination that new or more restrictive fuel airworthiness limitations and tasks are necessary. This AD continues to require the actions in AD 2017-10-17 and requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive fuel airworthiness limitations and tasks, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also expands the applicability to include additional airplane models. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective December 21, 2022.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of December 21, 2022.
The Director of the Federal Register approved the incorporation by reference of a certain other publication listed in this AD as of June 29, 2017 (82 FR 24017, May 25, 2017).
ADDRESSES:
AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2022-0673; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
• For EASA material incorporated by reference (IBR) in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; website easa.europa.eu. You may find this IBR material on the EASA website at ad.easa.europa.eu.
• For Airbus service information identified in this final rule, contact Airbus SAS, Airworthiness Office—EAL, Rond-Point Emile Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com; website airbus.com.
• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket at regulations.gov under Docket No. FAA-2022-0673.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
Vladimir Ulyanov, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone 206-231-3229; email vladimir.ulyanov@faa.gov.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2017-10-17, Amendment 39-18891 (82 FR 24017, May 25, 2017) (AD 2017-10-17). AD 2017-10-17 applied to certain Airbus SAS Model A330-223F and -243F airplanes; Model A330-201, -202, -203, -223, and -243 airplanes; Model A330-301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes. AD 2017-10-17 required revising the existing maintenance or inspection program, as applicable, to include new fuel airworthiness limitations. The FAA issued AD 2017-10-17 to address the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
The NPRM published in the Federal Register on June 10, 2022 (87 FR 35465). The NPRM was prompted by AD 2021-0252, dated November 17, 2021, issued by EASA (referred to after this as the MCAI). The MCAI states that new or more restrictive fuel airworthiness limitations and tasks are necessary.
You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2022-0673.
In the NPRM, the FAA proposed to continue to require the actions in AD 2017-10-17. The NPRM also proposed to require revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive fuel airworthiness limitations and tasks, as specified in EASA AD 2021-0252. In addition, the NPRM proposed to expand the applicability to include additional models. The FAA is issuing this AD to address the unsafe condition on these products.
Discussion of Final Airworthiness Directive
Comments
The FAA received comments from the Air Line Pilots Association, International (ALPA) who supported the NPRM without change.
Conclusion
This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data, considered the comment received, and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.
Related Service Information Under 1 CFR Part 51
EASA AD 2021-0252 describes new or more restrictive fuel airworthiness limitations and tasks.
This AD also requires Airbus A330 Airworthiness Limitations Section (ALS) Part 5—Fuel Airworthiness Limitations (FAL), Revision 01, dated October 28, 2015, which the Director of the Federal Register approved for incorporation by reference as of June 29, 2017 (82 FR 24017, May 25, 2017).
This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 138 airplanes of U.S. registry. Start Printed Page 68617 The FAA estimates the following costs to comply with this AD:
The FAA estimates the total cost per operator for the retained actions from AD 2017-10-17 to be $7,650 (90 work-hours × $85 per work-hour).
The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 work-hours per operator, although the agency recognizes that this number may vary from operator to operator. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate.
The FAA estimates the total cost per operator for the new actions to be $7,650 (90 work-hours × $85 per work-hour).
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a “significant regulatory action” under Executive Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
Start List of SubjectsList of Subjects in 14 CFR Part 39
- Air transportation
- Aircraft
- Aviation safety
- Incorporation by reference
- Safety
The Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
Start PartPART 39—AIRWORTHINESS DIRECTIVES
End Part Start Amendment Part1. The authority citation for part 39 continues to read as follows:
End Amendment Part[Amended]2. The FAA amends § 39.13 by:
End Amendment Part Start Amendment Parta. Removing Airworthiness Directive 2017-10-17, Amendment 39-18891 ( 82 FR 24017, May 25, 2017); and
End Amendment Part Start Amendment Partb. Adding the following new airworthiness directive:
End Amendment Part2022-21-14 Airbus SAS: Amendment 39-22213; Docket No. FAA-2022-0673; Project Identifier MCAI-2021-01282-T.
(a) Effective Date
This airworthiness directive (AD) is effective December 21, 2022.
(b) Affected ADs
This AD replaces AD 2017-10-17, Amendment 39-18891 (82 FR 24017, May 25, 2017) (AD 2017-10-17).
(c) Applicability
This AD applies to Airbus SAS Model airplanes identified in paragraphs (c)(1) through (4) of this AD, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before July 1, 2021.
(1) Model A330-223F and -243F airplanes.
(2) Model A330-201, -202, -203, -223, and -243 airplanes.
(3) Model A330-301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes.
(4) Model A330-841, and -941 airplanes.
(d) Subject
Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks.
(e) Unsafe Condition
This AD was prompted by a determination that new or more restrictive fuel airworthiness limitations and tasks are necessary. The FAA is issuing this AD to address the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Retained Revision of the Existing Maintenance or Inspection Program, With No Changes
This paragraph restates the requirements of paragraph (j) of AD 2017-10-17, with no changes. For airplanes identified in paragraphs (c)(1) through (3) of this AD with an original certificate of airworthiness or original export certificate of airworthiness issued on or before October 28, 2015: Within 3 months after June 29, 2017 (the effective date of AD 2017-10-17), revise the existing maintenance or inspection program, as applicable, to incorporate Airbus A330 Airworthiness Limitations Section (ALS) Part 5—Fuel Airworthiness Limitations (FAL), Revision 01, dated October 28, 2015. The compliance times for accomplishing the initial tasks specified in Airbus A330 ALS Part 5—FAL, Revision 01, dated October 28, 2015, are at the times specified in Airbus A330 ALS Part 5—FAL, Revision 01, dated October 28, 2015, or within 3 months after revising the maintenance or inspection program as required by paragraph (g) of this AD, whichever occurs later. Accomplishing the revision of the existing maintenance or inspection program required by paragraph (i) of this AD terminates the requirements of this paragraph.
(h) Retained Restrictions on Alternative Actions, Intervals, and Critical Design Configuration Control Limitations (CDCCLs), With a New Exception
This paragraph restates the requirements of paragraph (k) of AD 2017-10-17, with a new exception. Except as required by paragraph (i) of this AD, after accomplishing the revision required by paragraph (g) of this AD, no alternative actions ( e.g., inspections), intervals, or CDCCLs may be used unless the actions, intervals, or CDCCLs are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (l)(1) of this AD.
(i) New Revision of the Existing Maintenance or Inspection Program
Except as specified in paragraph (j) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2021-0252, dated November 17, 2021 (EASA AD 2021-0252). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph (g) of this AD.
(j) Exceptions to EASA AD 2021-0252
(1) Where EASA AD 2021-0252 refers to its effective date, this AD requires using the effective date of this AD.
(2) The requirements specified in paragraphs (1) and (2) of EASA AD 2021-0252 do not apply to this AD.
(3) Paragraph (3) of EASA AD 2021-0252 specifies revising “the AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.
(4) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2021-0252 is at the applicable Start Printed Page 68618 “limitations” and “intervals” as incorporated by the requirements of paragraph (3) of EASA AD 2021-0252, or within 90 days after the effective date of this AD, whichever occurs later.
(5) The provisions specified in paragraphs (4) and (5) of EASA AD 2021-0252 do not apply to this AD.
(6) The “Remarks” section of EASA AD 2021-0252 does not apply to this AD.
(k) New Provisions for Alternative Actions, Intervals, and CDCCLs
After the existing maintenance or inspection program has been revised as required by paragraph (i) of this AD, no alternative actions ( e.g., inspections), intervals, and CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2021-0252.
(l) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Manager, International Validation Branch, mail it to the address identified in paragraph (m) of this AD or email to: 9-AVS-AIR-730-AMOC@faa.gov. If mailing information, also submit information by email. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
(m) Additional Information
For more information about this AD, contact Vladimir Ulyanov, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone 206-231-3229; email vladimir.ulyanov@faa.gov.
(n) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(3) The following service information was approved for IBR on December 21, 2022.
(i) European Union Aviation Safety Agency (EASA) AD 2021-0252, dated November 17, 2021.
(ii) [Reserved]
(4) The following service information was approved for IBR on June 29, 2017 (82 FR 24017, May 25, 2017).
(i) Airbus A330 Airworthiness Limitations Section (ALS) Part 5—Fuel Airworthiness Limitations (FAL), Revision 01, dated October 28, 2015.
(ii) [Reserved]
(5) For EASA AD 2021-0252, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; website easa.europa.eu. You may find this EASA AD on the EASA website at ad.easa.europa.eu. For Airbus material, contact Airbus SAS, Airworthiness Office—EAL, Rond-Point Emile Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com; website airbus.com.
(6) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.
(7) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.
Start SignatureIssued on October 6, 2022.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service.
[FR Doc. 2022-24901 Filed 11-15-22; 8:45 am]
BILLING CODE 4910-13-P
Document Information
- Effective Date:
- 12/21/2022
- Published:
- 11/16/2022
- Department:
- Federal Aviation Administration
- Entry Type:
- Rule
- Action:
- Final rule.
- Document Number:
- 2022-24901
- Dates:
- This AD is effective December 21, 2022.
- Pages:
- 68616-68618 (3 pages)
- Docket Numbers:
- Docket No. FAA-2022-0673, Project Identifier MCAI-2021-01282-T, Amendment 39-22213, AD 2022-21-14
- RINs:
- 2120-AA64: Airworthiness Directives
- RIN Links:
- https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives
- Topics:
- Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety
- PDF File:
- 2022-24901.pdf
- Supporting Documents:
- » AD Supporting Documents
- » Airworthiness Directives: Airbus SAS Airplanes
- » U.S. DOT/FAA - Supplemental AD Document (EASA AD 2021-0252)
- » Airworthiness Directives: Airbus SAS Airplanes
- CFR: (1)
- 14 CFR 39.13