2015-32796. Energy Conservation Program: Certification and Enforcement-Import Data Collection  

  • Start Preamble Start Printed Page 81199

    AGENCY:

    Office of the General Counsel, Department of Energy.

    ACTION:

    Notice of proposed rulemaking.

    SUMMARY:

    The U.S. Department of Energy (DOE) is proposing a requirement that a person importing into the United States any covered product or equipment subject to an applicable energy conservation standard provide, prior to importation, a certification of admissibility to the DOE for the covered product or equipment. The certification would be submitted to DOE through the U.S. Customs and Border Protection's Automated Commercial Environment (ACE).

    DATES:

    DOE will accept comments, data, and information regarding this notice of proposed rulemaking (NOPR) no later than February 12, 2016. See section V, “Public Participation,” of this NOPR for details.

    ADDRESSES:

    Any comments submitted must identify the NOPR for Import Data Collection, and provide docket number EERE-2015-BT-CE-0019 and/or regulatory information number (RIN) number 1990-AA44. Comments may be submitted using any of the following methods:

    1. Federal eRulemaking Portal: www.regulations.gov. Follow the instructions for submitting comments.

    2. Email: ImportData2015CE0019@ee.doe.gov. Include the docket number and/or RIN in the subject line of the message.

    3. Mail: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Program, Mailstop EE-5B, 1000 Independence Avenue SW., Washington, DC, 20585-0121. If possible, please submit all items on a CD. It is not necessary to include printed copies.

    4. Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Program, 950 L'Enfant Plaza, SW., Suite 600, Washington, DC, 20024. Telephone: (202) 586-2945. If possible, please submit all items on a CD. It is not necessary to include printed copies.

    For detailed instructions on submitting comments and additional information on the rulemaking process, see section V of this document (Public Participation).

    Docket: The docket, which includes Federal Register notices, public meeting attendee lists and transcripts, comments, and other supporting documents/materials, is available for review at regulations.gov. All documents in the docket are listed in the regulations.gov index. However, some documents listed in the index, such as those containing information that is exempt from public disclosure, may not be publicly available.

    A link to the docket Web page can be found at: http://www.regulations.gov/​#!docketDetail;​D=​EERE-2015-BT-CE-0019. This Web page will contain a link to the docket for this notice on the regulations.gov site. The regulations.gov Web page will contain simple instructions on how to access all documents, including public comments, in the docket. See section V for information on how to submit comments through regulations.gov.

    For further information on how to submit a comment, review other public comments and the docket, or to request a public meeting, contact Ms. Brenda Edwards at (202) 586-2945 or by email: Brenda.Edwards@ee.doe.gov.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Ms. Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-5B, 1000 Independence Avenue SW., Washington, DC 20585-0121. Telephone: 202-586-6590. Email: ashley.armstrong@ee.doe.gov; or Mr. Steven Goering, U.S. Department of Energy, Office of the General Counsel, Forrestal Building, GC-32, 1000 Independence Avenue SW., Washington, DC 20585-0121. Telephone: 202-286-5691. Email: steven.goering@hq.doe.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Authority and Background

    II. Summary of the Notice of Proposed Rulemaking

    III. Discussion

    A. Relevant Harmonized Tariff Schedule Codes

    B. Applicability of provision

    C. Information to be collected regarding products not previously certified to DOE as compliant with applicable energy conservation standards

    D. Method of Collection

    E. Effective Date and Compliance Date

    IV. Procedural Issues and Regulatory Review

    A. Review Under Executive Order 12866

    B. Review Under the Regulatory Flexibility Act

    C. Review Under the Paperwork Reduction Act

    D. Review Under the National Environmental Policy Act

    E. Review Under Executive Order 13132

    F. Review Under Executive Order 12988

    G. Review Under the Unfunded Mandates Reform Act of 1995

    H. Review Under the Treasury and General Government Appropriations Act, 1999

    I. Review Under Executive Order 12630

    J. Review Under the Treasury and General Government Appropriations Act, 2001

    K. Review Under Executive Order 13211

    V. Public Participation

    VI. Approval of the Office of the Secretary

    I. Authority and Background

    Title III, Part B [1] of the Energy Policy and Conservation Act of 1975 (EPCA or the Act), Public Law 94-163 (codified at 42 U.S.C. 6291-6317) sets forth a variety of provisions designed to improve energy efficiency and established the Energy Conservation Program for Consumer Products Other Than Automobiles.[2] Part C [3] of title III (42 U.S.C. 6311-6317) establishes an energy conservation program for certain industrial and commercial equipment. The Act provides DOE authority to enforce certain prohibited acts listed in section 6302(a), including EPCA's prohibition on the importation of covered products and equipment that do not conform to applicable energy conservation standards. (42 U.S.C. 6302(a)(5), 6303, 6316(a),(b)) [4]

    Start Printed Page 81200

    EPCA further provides that any covered product or equipment “offered for importation in violation of section 6302 of this title shall be refused admission into the customs territory of the United States under rules issued by the Secretary of the Treasury,” except under certain terms and conditions authorized under those rules. (42 U.S.C. 6301) Under the regulations issued by the Department of Treasury and the U.S. Customs and Border Protection (CBP), if the DOE or the Federal Trade Commission “notifies CBP that a covered import does not comply with an applicable energy conservation or energy labeling standard, CBP will refuse admission to the covered import, or pursuant to paragraph (d) of this section, CBP may allow conditional release of the covered import so that it may be brought into compliance.” (19 CFR 12.50(b))

    In addition, EPCA authorizes DOE to require importers of covered products and equipment “to submit information or reports” with respect to energy efficiency, energy use, or water use of covered products and equipment “as the Secretary determines may be necessary . . . to insure compliance with the requirements of this part.” (42 U.S.C. 6296(d))

    In its current form, 10 CFR 429.5 requires that persons importing covered products or covered equipment comply with the provisions of 10 CFR parts 429, 430, and 431. Part 429 requires, among other things, that importers of covered products or covered equipment subject to an applicable energy conservation standard [5] submit a certification report to DOE prior to distributing their products in U.S. commerce. The certification report must provide specific information for each basic model, including the product or equipment type, the brand name, and the basic model number, as well as specific energy use information. (10 CFR 429.12(b)). Importers are currently required to submit certifications on product-specific templates to DOE's Compliance and Certification Management System (CCMS), which assigns each certification submission a unique attachment identification number. (10 CFR 429.12(h)).

    In prior rulemakings, the DOE has received comments from a number of interested parties urging DOE to work with CBP to enforce EPCA and its implementing regulations. For example, in 1996, the National Electrical Manufacturers Association (NEMA) called on the DOE to “provide sufficient guidelines to Customs Officers in order to facilitate enforcement of requirements similar to those placed on U.S. manufacturers.” (Docket No. EE-RM-96-400, NEMA, No. 38 at p. 15). More recently, in April 2011, in response to a DOE Request for Information concerning “Increased Scope of Coverage for Electric Motors,” NEMA and the Appliance Standards Awareness Project (ASAP), addressed this issue in joint comments supported by the American Council for an Energy-Efficient Economy, the Alliance to Save Energy, Natural Resources Defense Council, Northeast Energy Efficiency Partnerships, Northwest Energy Efficiency Alliance and the Northwest Power and Conservation Council. The commenters estimated that more effective enforcement of standards vis-à-vis imported electric motors could produce as much as one billion kilowatt-hours in incremental savings each year, and further noted that “manufacturers who comply are placed at a competitive disadvantage. . . . Therefore, we strongly urge DOE to work with Customs to expedite efforts for improved monitoring and enforcement with respect to imported motors. Without improved enforcement, the benefits of both existing standards and future standards are jeopardized.” (Docket No. EERE-2010-BT-STD-0027, ASAP, NEMA, No. 20 at p. 5).

    On February 19, 2014, the President issued Executive Order 13659, Streamlining the Export/Import Process for America's Businesses (EO 13659), which requires certain federal agencies to significantly enhance their use of technology to modernize and simplify the trade processing infrastructure. Specifically, EO 13659 requires applicable government agencies to use CBP's International Trade Data System (ITDS), and its supporting systems, such as the Automated Commercial Environment (ACE), to create a “single window” through which businesses will electronically submit import-related data for clearance. EO 13659 envisions and is working toward a simpler, more efficient portal for trade use, to the benefit of both the trade and those government agencies with related authorities and responsibilities.

    Based upon its specific authority to require the submission of information by importers and its broader authority to regulate the importation of covered products and equipment, DOE seeks in this proposed rule to require importers to provide a certification of admissibility to DOE prior to importation of products or equipment subject to DOE regulations. Importers would be required to submit the certification to DOE through ACE, which currently is being deployed to support electronic data filing through its Automated Broker Interface (ABI).

    II. Summary of the Notice of Proposed Rulemaking

    In this NOPR, DOE proposes to require that importers of covered products or equipment subject to an applicable energy conservation standard set forth in 10 CFR part 430 or 431[6] and falling under specified classifications of the Harmonized Tariff Schedule of the United States [7] provide a certification of admissibility for each shipment of such products or equipment before their arrival at a U.S. port of entry. Importers of such covered products or equipment are currently required to submit annual certifications to DOE that the products or equipment they intend to import are compliant with all applicable energy conservation standards, using CCMS. DOE proposes that, if an importer has already submitted its required certification report to DOE, the importer would provide a certification of admissibility with only the information necessary to tie the shipment back to its most recent CCMS submission. Any importer that has not already filed its required annual certification would be required to provide more detailed information regarding the covered product or equipment contained in the shipment.

    Start Printed Page 81201

    III. Discussion

    A. Relevant Harmonized Tariff Schedule Codes

    All importers must provide the appropriate code for the products or equipment they are importing as explained in the Harmonized Tariff Schedule of the United States, Annotated for Statistical Reporting Purposes, (HTS) which is published by the U.S. International Trade Commission pursuant to section 1207 of the Omnibus Trade and Competitiveness Act of 1988 (Pub. L. 100-418; 19 U.S.C. 3007) (Trade Act). The HTS code is meant in part to allow CBP to make classification distinctions of U.S. interest. Consistent with this practice, DOE would require importers of shipments containing covered products and equipment falling under specified classifications of the HTS to file a certification of admissibility with DOE. The relevant HTS codes that would require a certification filing to DOE are presented in Table III.1.[8]

    Table III.1—HTS Codes of Products and Equipment Requiring Certification of Admissibility

    HTS Code (2014)HTS Product description (2014)
    3922Baths, shower baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics.
    6910Ceramic sinks, washbasins, washbasin pedestals, baths, bidets, water closet bowls, flush tanks, urinals and similar sanitary fixtures.
    7011.10Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for electric lamps, cathode-ray tubes or the like: For electric lighting.
    7321Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel.
    7322.90.0015Air heaters, not electrically heated, incorporating a motor-driven fan or blower.
    7322.90.0030Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower.
    7322.90.0045Parts of air heaters and hot air distributors.
    8402Steam or other vapor generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers; parts thereof.
    8403Central heating boilers (other than those of heading 8402) and parts thereof.
    8413Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; part thereof.
    8414Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; parts thereof.
    8415Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated; parts thereof.
    8416Furnace burners for liquid fuel, for pulverized solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances; parts thereof.
    8417Industrial or laboratory furnaces and ovens, including incinerators, nonelectric, and parts thereof.
    8418Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps, other than the air conditioning machines of heading 8415; parts thereof.
    8419.11.00Instantaneous gas water heaters.
    8419.19.0020Instantaneous water heaters, non-electric.
    8419.81.50Cooking stoves, ranges and ovens.
    8421.12.0000Clothes-dryers (centrifugal).
    8422.11.00Dishwashing machines, of the household type.
    8422.19.00Dishwashing machines, other.
    8422.90Parts of dishwashing machines.
    8427.10Self-propelled trucks powered by an electric motor.
    8428Other lifting, handling, loading or unloading machinery (for example, elevators, escalators, conveyors, teleferics).
    8429Self-propelled bulldozers, angledozers, graders, levelers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:.
    8430Other moving, grading, leveling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snowplows and snowblowers.
    8431Parts suitable for use solely or principally with the machinery of headings 8425 to 8430.
    8432Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers; parts thereof.
    8433Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof.
    8434Milking machines and dairy machinery, and parts thereof.
    8435Presses, crushers and similar machinery, used in the manufacture of wine, cider, fruit juices or similar beverages; parts thereof.
    8436Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders; parts thereof.
    Start Printed Page 81202
    8437Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, and parts thereof; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery; parts thereof.
    8438Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable fats or oils; parts thereof.
    8439Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard (other than the machinery of heading 8419); parts thereof.
    8440Bookbinding machinery, including book-sewing machines, and parts thereof.
    8441Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds, and parts thereof.
    8442Machinery, apparatus and equipment (other than the machine tools of headings 8456 to 8465), for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones.
    8443Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof.
    8444Machines for extruding, drawing, texturing or cutting man-made textile materials.
    8445Machines for preparing textile fibers; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft winding) machines and machines for preparing textile yarns for use on the machines.
    8446Weaving machines (looms).
    8447Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting.
    8448Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles).
    8449Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof.
    8450Household- or laundry-type washing machines, including machines which both wash and dry; parts thereof.
    8451Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof.
    8452Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles; parts thereof.
    8453Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines; parts thereof.
    8454Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof.
    8455Metal-rolling mills and rolls therefor; parts thereof.
    8456Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro-discharge, electro-chemical, electron-beam, ionic-beam or plasma arc processes; water-jet cutting machines.
    8457Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal.
    8458Lathes (including turning centers) for removing metal.
    8459Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458.
    8460Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines [listed in prior subheadings].
    8461Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included.
    8462Machine tools (including presses) for working metal by forging, hammering or die-stamping; machine tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal.
    8463Other machine tools for working metal or cermets, without removing material.
    8464Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass.
    Start Printed Page 81203
    8465Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials.
    8466Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for machine tools; tool holders for any type of tool for working in the hand.
    8467.21.00, 8467.22.00, 8467.29.00, 8467.81.0000, 8467.89Tools for working in the hand (with self-contained electric motor).
    8469Typewriters other than printers of heading 8443; word processing machines.
    8470Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers.
    8471Automatic data processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included.
    8472Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or wrapping machines, pencil-sharpening machines, perforating or stapling machines).
    8473Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8469 to 8472.
    8474Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or molding solid mineral fuels.
    8475Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware; parts thereof.
    8476Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines; parts thereof.
    8477Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof.
    8478Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter; parts thereof.
    8479Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof.
    8481.80.1020Bath and shower faucets (of copper).
    8481.80.1030Sink and lavatory faucets (of copper).
    8481.80.30Other taps, cocks, valves and similar appliances (of iron or steel).
    8481.80.5060Bath, shower, sink and lavatory faucets (of other materials).
    8486Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in Note 9 (C) to this chapter; parts and accessories.
    8501Electric motors and generators (excluding generating sets).
    8502.40.0000Electric rotary converters.
    8504Electrical transformers, static converters (for example, rectifiers) and inductors; parts thereof.
    8508.11, 8508.19, 8508.70Vacuum cleaners; parts thereof: With self-contained electric motor.
    8509Electromechanical domestic appliances, with self-contained electric motor, other than vacuum cleaners of heading 8508; parts thereof.
    8510Shavers, hair clippers and hair-removing appliances, with self-contained electric motor; parts thereof.
    8511.40.0000Starter motors and dual purpose starter-generators.
    8511.90.60Other parts of electrical ignition or starting equipment.
    8512Electrical lighting or signaling equipment (excluding articles of heading 8539), windshield wipers, defrosters and demisters, of a kind used for cycles or motor vehicles; parts thereof.
    8514Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss; parts thereof.
    8515Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets; parts thereof.
    8516Electric instantaneous or storage water heaters and immersion heaters; electric space heating apparatus and soil heating apparatus; electrothermic hairdressing apparatus (for example, hair dryers, hair curlers, curling tong heaters) and hand dryers.
    8517Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network.
    Start Printed Page 81204
    8518Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audio-frequency electric amplifiers; electric sound amplifier sets; parts thereof.
    8519Sound recording or reproducing apparatus.
    8521Video recording or reproducing apparatus, whether or not incorporating a video tuner.
    8525Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders.
    8527Reception apparatus for radio broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock.
    8528Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus.
    8529Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528.
    8530Electrical signaling, safety or traffic control equipment for railways, streetcar lines, subways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 8608); parts thereof.
    8539Electrical filament or discharge lamps, including sealed beam lamp units and ultraviolet or infrared lamps; arc lamps; parts thereof.
    8543Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this chapter; parts thereof.
    8549Other electrical parts of machinery or apparatus, not specified or included elsewhere in this chapter.
    8601Rail locomotives powered from an external source of electricity or by electric accumulators (batteries).
    8602Other rail locomotives; locomotive tenders.
    8603Self-propelled railway or tramway coaches, vans and trucks, other than those of heading 8604.
    8604Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles).
    8605Railway or tramway passenger coaches, not self-propelled; luggage vans, post office coaches and other special purpose railway or tramway coaches, not self-propelled (excluding those of heading 8604).
    8607Parts of railway or tramway locomotives or rolling stock: Truck assemblies, axles and wheels, and parts thereof.
    8608Railway or tramway track fixtures and fittings; mechanical (including electro-mechanical) signaling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing.
    8701Tractors (other than tractors of heading 8709).
    8702Motor vehicles for the transport of ten or more persons, including the driver.
    8703Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702), including station wagons and racing cars.
    8704Motor vehicles for the transport of goods.
    8705Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, wreckers, mobile cranes, fire fighting vehicles, concrete mixers, road sweepers, spraying vehicles, mobile workshops, mobile radiological units).
    8707Bodies (including cabs), for the motor vehicles of headings 8701 to 8705.
    8708Parts and accessories of the motor vehicles of headings 8701 to 8705.
    8709Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles.
    8710Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles.
    8713Carriages for disabled persons, whether or not motorized or otherwise mechanically propelled.
    8714Parts and accessories of vehicles of headings 8711 to 8713.
    8802Other aircraft (for example, helicopters, airplanes); spacecraft (including satellites) and suborbital and spacecraft launch vehicles.
    8803Parts of goods of heading 8801 or 8802.
    8805Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles.
    8901Cruise ships, excursion boats, ferry boats, cargo ships, barges and similar vessels for the transport of persons or goods.
    8902Fishing vessels; factory ships and other vessels for processing or preserving fishery products.
    8904Tugs and pusher craft.
    8905Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks; floating or submersible drilling or production platforms.
    Start Printed Page 81205
    8906Other vessels, including warships and lifeboats other than row boats.
    8905Binoculars, monoculars, other optical telescopes, and mountings therefor; other astronomical instruments and mountings therefor, but not including instruments for radio-astronomy; parts and accessories thereof.
    9006Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than discharge lamps of heading 8539; parts and accessories thereof.
    9007Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus; parts and accessories thereof.
    9008Image projectors, other than cinematographic; photographic (other than cinematographic) enlargers and reducers; parts and accessories thereof.
    9010Apparatus and equipment for photographic (including cinematographic) laboratories, not specified or included elsewhere in this chapter; negatoscopes; projection screens; parts and accessories thereof.
    9014Direction finding compasses; other navigational instruments and appliances; parts and accessories thereof.
    9015Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders; parts and accessories thereof.
    9018Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments; parts and accessories thereof.
    9019Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus; parts and accessories thereof.
    9022Apparatus based on the use of X-rays or of alpha, beta or gamma radiations, whether or not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy apparatus, X-ray tubes and other X-ray generators, high tension generators, control panels and desks, screens, examination or treatment tables, chairs and the like; parts and accessories thereof.
    9023Instruments, apparatus and models, designed for demonstrational purposes (for example, in education or exhibitions), unsuitable for other uses, and parts and accessories thereof.
    9024Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics), and parts and accessories thereof.
    9027Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes; parts and accessories thereof.
    9030Oscilloscopes, spectrum analyzers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations; parts and accessories thereof.
    9031Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors; parts and accessories thereof.
    9033Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of chapter 90.
    9105.11Alarm clocks (electrically operated).
    9105.19Other clocks.
    9207Musical instruments, the sound of which is produced, or must be amplified, electrically (for example, organs, guitars, accordions).
    9209Parts (for example, mechanisms for music boxes) and accessories (for example, cards, discs and rolls for mechanical instruments) of musical instruments; metronomes, tuning forks and pitch pipes of all kinds.
    9401Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof.
    9402Medical, surgical, dental or veterinary furniture (for example, operating tables, examination tables, hospital beds with mechanical fittings, dentists' chairs); barbers' chairs and similar chairs, having rotating as well as both reclining and elevating movements; parts of the foregoing articles.
    9405Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included.
    9406Illuminated signs, illuminated nameplates and the like.
    9504Video game consoles and machines, articles for arcade, table or parlor games, including pinball machines, bagatelle, billiards and special tables for casino games; automatic bowling alley equipment; parts and accessories thereof.
    Start Printed Page 81206
    9506Articles and equipment for general physical exercise, gymnastics, athletics, other sports (including table-tennis) or outdoor games, not specified or included elsewhere in this chapter; swimming pools and wading pools; parts and accessories thereof.
    9508Merry-go-rounds, boat-swings, shooting galleries and other fairground amusements; traveling circuses and traveling menageries; traveling theaters; parts and accessories thereof.
    9518Tailors' dummies and other mannequins; automatons and other animated displays used for shopwindow dressing.

    DOE requests comment on the requirement that importers importing covered products or equipment subject to DOE energy conservation standards that are within the above listed HTS codes provide a certification of admissibility to DOE. Further, DOE requests comment as to whether covered products or equipment subject to or being considered for energy conservation standards are currently imported using other HTS codes.

    B. Applicability of Provision

    The requirement for a certification of admissibility would apply to all covered products and equipment subject to a DOE energy conservation standard set forth in 10 CFR part 430 or 431. The requirement would apply to all such products and equipment contained in the shipment, either as a final product or a component part of a final product. For example, an importer would need to submit an electronic record for all covered electric motors as defined in 10 CFR 431.12, provided that the electric motor is subject to a standard, regardless of whether the electric motor will be imported as a stand-alone product or as a component part of another product not subject to DOE regulations (a treadmill, for example). Similarly, an importer of a laptop computer that is bundled with an external power supply would be required to submit a certification of admissibility for the external power supply.

    If the shipment contains any such covered products or equipment, the importer would be required to state whether the product or equipment has been certified to DOE as compliant with all applicable energy conservation standards and, if so, the CCMS ticket number, the CCMS attachment identification number assigned to the certification submission, and the line number in the submission corresponding to the basic model certified. As discussed above, EPCA authorizes the Secretary of Energy to require importers of covered products and equipment “to submit information or reports to the Secretary” with respect to energy efficiency, energy use, or water use of covered products and equipment. (42 U.S.C. 6296(d)(1)) 10 CFR part 429 requires, among other things, that importers submit a certification report to DOE prior to distributing their products in U.S. commerce, and the failure to properly certify covered products and covered equipment subject to DOE energy conservation standards is a prohibited act under those regulations. 10 CFR 429.12, 429.102(a)(1). Part of the certification report is a statement whereby the manufacturer (including an importer) certifies that the basic models listed in the certification report comply with the applicable energy conservation standard and have been tested according to the applicable test requirements. 10 CFR 429.12. DOE requests comment on its proposal to require, for a shipment that contains covered products or equipment subject to a DOE energy conservation standard, that the importer state whether the product or equipment has been certified to DOE as compliant with all applicable energy conservation standards and, if so, provide the CCMS ticket number, the CCMS attachment identification number assigned to the certification submission, and the line number in the submission corresponding to the basic model certified.

    If any covered product or equipment contained in the shipment has not been certified to DOE through CCMS, the importer would be required to include in its certification of admissibility; (1) the type of product or equipment; (2) the brand name of the covered product or equipment; (3) the individual model number of the covered product or equipment; (4) the original equipment manufacturer (OEM) of the covered product or equipment; and (5) a contact name and email address for the importer of record.

    Currently, 10 CFR part 429 uses the terms “individual model number,” “manufacturer's individual model number,” and “manufacturer's model number” interchangeably and, of the three terms, only defines the term “manufacturer's model number.” For clarity, DOE proposes to replace the term “manufacturer's model number” with the term “individual model number” in the definitions at 10 CFR 429.2.[9]

    DOE initially considered requiring importers to provide all of the product-specific information specified above for all covered products and equipment subject to energy conservation standards. However, importers are already required to provide this information to DOE, prior to importation, when certifying that basic models of covered product and equipment meet applicable energy conservation standards. (10 CFR 429.12(a)) DOE proposes, therefore, to collect this additional information only regarding imported covered products and equipment subject to energy conservation standards that the importer has not certified to DOE as meeting applicable energy conservation standards. DOE believes this would be less burdensome to importers who have certified the basic models of covered products and equipment being imported, and therefore have already provided this information to DOE. DOE requests comment on its proposal to collect this additional information only regarding imported covered products and equipment subject to energy conservation standards that the importer has not certified to DOE as meeting applicable energy conservation standards.

    Currently, importers are not required, in certifying a covered product or equipment that is a component product of a final product, to provide the brand name and individual model number of the final product. Thus, an importer may certify a basic model once in CCMS but import that basic model as a component of a variety of different final products. In order to facilitate, as necessary, identification of covered products or equipment being imported Start Printed Page 81207as a component of a final product, DOE proposes that, if a certified covered product or equipment is a component product of a final product being imported, the certification of admissibility must include the brand name and individual model number of the imported final product. DOE requests comment on this proposal. This information would be required regarding any covered product or equipment being imported as a component of another product, whether or not the covered product or equipment has been certified to DOE as meeting applicable energy conservation standards. DOE expects that it would be less of a reporting burden to provide the final product information during the importation process rather than as part of a complete certification through CCMS.

    As an alternative to this proposal, DOE would consider requiring this information from all manufacturers, including importers, as part of the process of certifying covered products or equipment. That requirement would not be adopted in this rulemaking, but rather in a separate rulemaking that DOE is preparing to revise its certification, compliance, and enforcement regulations applicable to consumer products and commercial and industrial equipment. See RIN: 1904-AD26. DOE requests comment regarding whether the reporting burden on importers would be less to provide this information as part of the certification of admissibility or as part of a compliance certification report submitted through CCMS.

    As in the case of products or equipment that are not “covered,” importers of products or equipment that are “covered” but not subject to standards (either DOE has not set standards or compliance with standards is not yet required) would not be required to provide a certification of admissibility. For example, although EPCA defines “covered equipment” to include “electric motors” (42 U.S.C. 6311(1)(A)), a small electric motor that is a component of a covered product or covered equipment is not subject to DOE energy conservation standards. (42 U.S.C. 6317(b)(3)). In addition, certain electric motors, such as NEMA Design C and IEC Design H, are not currently subject to the energy conservation standards for electric motors. 10 CFR 431.25.

    The regulations issued by the Department of Treasury and CBP pursuant to EPCA, discussed herein, provide that, “[u]pon a determination that a covered import is not in compliance with applicable energy conservation or labeling standards, DOE . . ., will provide CBP with a written or electronic notice that identifies the importer and contains a description of the noncompliant covered import that is sufficient to enable CBP to identify the subject merchandise and refuse admission thereof into the customs territory of the United States.” (19 CFR 12.50(c)) The requirement for a certification of admissibility would ensure that DOE is aware of all shipments containing covered products and equipment subject to energy conservation standards prior to importation into the United States. This information will allow DOE to notify CBP if an importer is attempting to import a covered product or equipment that DOE has determined fails to meet the applicable energy conservation standard. Requiring importers to state whether the covered product or equipment being imported has been certified to DOE would allow DOE to identify importers that have not complied with these requirements, including potentially the failure to test; ensure that the product or equipment does, in fact, meet the applicable standards; and, if not, take appropriate enforcement action.

    DOE requests comment on the proposed requirement that importers submit a certification of admissibility to DOE for all covered products and equipment subject to energy conservation standards contained in the shipment, either as a final product or a component part of a final product.

    C. Information to be Collected Regarding Products not Previously Certified to DOE as Compliant With Applicable Energy Conservation Standards

    If the product or equipment is covered and subject to a DOE energy conservation standard, and the basic model of the product or equipment has not been certified to DOE as compliant with all applicable energy conservation standards, then the certification of admissibility must include: (1) the type of product or equipment; (2) the brand name of the covered product or equipment; (3) the individual model number of the covered product or equipment; (4) whether the covered product or equipment is a final product or a component part of a final product and, if the covered product or equipment is a component, the brand name and individual model number of the final product; (5) the original equipment manufacturer (OEM) of the covered product or equipment, and in the case of electric motors, the Compliance Certification number; [10] and (6) a contact name and email address for the importer of record. In the interest of the Single Window Initiative that is part of the Beyond the Border Action Plan on Perimeter Security and Economic Competiveness between the Canada Border Services Agency and CBP, the requested information is similar to that collected by Canada under Part VI, section 13, of their Energy Efficiency Regulations. (Regulations Amending the Energy Efficiency Regulations (1996), SOR/2011-182) [11]

    1. Type of Product or Equipment

    The specific products and equipment covered by DOE regulations found in 10 CFR parts 430 and 431 are divided into various types. DOE regulations refer to these types by the headers found in the applicable sections of 10 CFR part 429, subpart B. For example, to identify the type of product or equipment being imported, an importer would provide one of the following three-digit codes [12] presented in Table III.2.

    Table III.2—Three-Digit Product Type Codes

    Product typeThree-digit code
    Refrigerators, refrigerator-freezers and freezers014
    Room air conditioners015
    Central air conditioners and heat pumps016
    Water heaters017
    Furnaces018
    Dishwashers019
    Clothes washers020
    Clothes dryers021
    Direct heating equipment022
    Kitchen ranges and ovens023
    Pool heaters024
    Television sets025
    Start Printed Page 81208
    Fluorescent lamp ballasts026
    General service fluorescent lamps027
    Faucets028
    Showerheads029
    Water closets030
    Urinals031
    Ceiling fans032
    Ceiling fan light kits033
    Torchieres034
    Compact fluorescent lamps035
    Dehumidifiers036
    External power supplies037
    Battery chargers038
    Electric motors039
    Commercial warm air furnaces041
    Commercial refrigerators, freezers, and refrigerator-freezers042
    Commercial heating, ventilating, air conditioning (HVAC) equipment043
    Commercial water heating equipment044
    Automatic commercial ice makers045
    Commercial clothes washers046
    Distribution transformers047
    Illuminated exit signs048
    Traffic signal modules and pedestrian modules049
    Commercial unit heaters050
    Commercial pre-rinse spray valves051
    Refrigerated bottled or canned beverage vending machines052
    Walk-in coolers and walk-in freezers053
    Metal halide lamp ballasts and fixtures054
    Light emitting diodes056
    Furnace fans058
    Pumps059
    Commercial packaged boilers060
    Portable air conditioners062

    For example, an importer of a consumer refrigerator would provide the code “014,” while an importer of a laptop bundled with an external power supply would provide code “037.” Collecting this information is essential to DOE's ability to identify possibly noncompliant products or equipment before they are imported into the United States. Once the type of product is identified, DOE can then focus its search of the relevant DOE databases to determine the compliance of the specific product or equipment being imported. DOE requests comment on requiring importers to identify the type of product or equipment being imported using a product-specific code in the certification of admissibility to DOE.[13]

    2. Brand

    The certification of compliance information DOE collects pursuant to 10 CFR 429.12 is brand-specific. A manufacturer provides the relevant information demonstrating compliance of their product or equipment specific to each brand under which a basic model may be labeled. Collecting information in the certification of admissibility regarding the brand of the covered product or equipment being imported would facilitate the DOE's determination of compliance of the product or equipment with applicable energy conservation standards and certification requirements. Moreover, collecting information as to the brand of the covered product or equipment is essential for DOE to provide CBP a description sufficient for CBP to identify the covered product and equipment and take appropriate action based upon the non-compliance of the product or equipment. DOE requests comment on requiring importers to provide the brand of the covered product or equipment being imported in their certification of admissibility to DOE.

    3. Individual Model Number

    The certification of compliance information DOE collects pursuant to 10 CFR 429.12 also includes the individual model number(s) within each basic model. By requiring importers to provide the individual model number of the covered product or equipment, DOE will be better able to determine if the product or equipment has, in fact, been certified as compliant or has been found noncompliant. Moreover, collecting information as to the individual model number of the covered product or equipment is essential for DOE, when required, to provide CBP a description sufficient for CBP to identify the product or equipment and take appropriate action based upon the non-compliance of the product or equipment. DOE requests comment on requiring importers to provide the individual model number of the covered product or equipment subject to DOE energy conservation standards in their certification of admissibility to DOE.

    4. Identification of Covered Product or Equipment Subject to DOE Energy Conservation Standards as a Product or Component

    As a practical matter, a description of covered product or equipment subject to DOE energy conservation standards that is a component of a final product must include information (e.g., brand and model number) regarding the final product sufficient to allow CBP to identify the final product and take appropriate action based upon the non-compliance of the component contained therein or packaged with the final product. It is therefore essential that the importer identify in its certification of admissibility whether the covered product or equipment subject to DOE energy conservation standards is a final product or a component of a final product and, if a component, the brand and individual model number of the final product. DOE requests comment on requiring importers to indicate in their certification of admissibility to DOE whether the covered product or equipment subject to DOE energy conservation standards being imported is a final product or a component of a final product and, if a component, the brand and individual model number of the final product.

    5. Original Equipment Manufacturer

    DOE routinely identifies noncompliant products by the original producer or assembler of the product (OEM). Collecting the OEM's name is therefore essential to DOE's ability to identify noncompliant products or equipment before they are imported into the United States. Once the OEM is identified, DOE can use that information to compare to the lists of products certified as compliant by that same OEM or, conversely, found to be noncompliant from the OEM. Identifying the OEM of the product will further help avoid confusion between similar products in the case where one OEM produces a compliant product while another does not. DOE requests comment on requiring importers to provide the name of the OEM for covered products and equipment subject to DOE energy conservation standards they are importing and, in the case of electric motors, the Compliance Certification number on the electric motor nameplate.

    6. Contact Name and Email Address for Importer of Record

    In cases where a certification of admissibility raises questions of possible noncompliance with energy conservation standards, DOE will Start Printed Page 81209follow-up with the importer of record regarding the covered products or equipment certified. Requiring importers to provide a contact name and email address would facilitate DOE's efforts in this regard and would serve the interest of the importer in expeditiously resolving any issues raised. DOE requests comment on requiring importers to provide a contact name and email address in their certification of admissibility to DOE.

    D. Method of Collection

    All importers would be required to submit their certifications of admissibility to DOE via CBP's ACE system. Importers are encouraged by CBP to use ACE as it allows them to file manifests electronically; make periodic payments on an interest-free monthly basis; file and process formal consumption entries and informal entries, including ABI Census Warning Overrides; view and respond to certain CBP forms through the ACE Portal; and file and process AD/CVD entries (also known as type 03 entries) and track the lifecycle of their AD/CVD cases. Participating in ACE also supports the U.S. Department of Homeland Security's dual mission to facilitate legitimate trade and secure the nation's borders. Importers will be able to provide required information to multiple federal agencies through ACE, thereby simplifying the paperwork submission process for importers. DOE requests comment on requiring importers to file the certification of admissibility to DOE through the ACE system.

    E. Effective Date and Compliance Date

    If adopted, the effective date for this rule would be 30 days after publication of the final rule in the Federal Register. The compliance date for the rule, on or after which importers must submit certifications of admissibility in accordance with the rule, would be 2 years after the date of publication of the final rule in the Federal Register.

    IV. Procedural Issues and Regulatory Review

    A. Review Under Executive Order 12866

    The Office of Management and Budget (OMB) has determined that today's regulatory action is not a “significant regulatory action” under section 3(f) of Executive Order 12866, “Regulatory Planning and Review,” 58 FR 51735 (Oct. 4, 1993). Accordingly, this action was not subject to review under the Executive Order by the Office of Information and Regulatory Affairs (OIRA) in the OMB.

    B. Review Under the Regulatory Flexibility Act

    The Regulatory Flexibility Act (5 U.S.C. 601 et seq.) requires preparation of an initial regulatory flexibility analysis (IRFA) for any rule that by law must be proposed for public comment, unless the agency certifies that the rule, if promulgated, will not have a significant economic impact on a substantial number of small entities. As required by Executive Order 13272, “Proper Consideration of Small Entities in Agency Rulemaking,” 67 FR 53461 (August 16, 2002), DOE published procedures and policies on February 19, 2003, to ensure that the potential impacts of its rules on small entities are properly considered during the rulemaking process. 68 FR 7990 DOE has made its procedures and policies available on the Office of the General Counsel's Web site (http://energy.gov/​gc/​office-general-counsel).

    DOE has prepared an IRFA for this rulemaking. As presented and discussed below, the IRFA describes potential impacts on importers of covered products or equipment subject to DOE energy conservation standards and the associated compliance costs.

    A statement of the objectives of, and reasons and legal basis for, the proposed rule are set forth elsewhere in the preamble and not repeated here.

    1. Description and Estimated Number of Small Entities Regulated

    For companies classified in different NAICS codes, the Small Business Administration (SBA) has set a size threshold, which defines those entities classified as “small businesses” for the purposes of the statute. DOE used the SBA's small business size standards to determine whether any small entities would be subject to the requirements of the rule. The size standards are listed by North American Industry Classification System (NAICS) code and industry description available at: http://www.sba.gov/​content/​table-small-business-size-standards and vary by NAICS code. Because the small business sizes vary by industry and the proposed rule affects companies in a range of NAICS codes, DOE used the most common threshold of 500 employees or less for an entity to be considered as a small business for this category.

    No comprehensive list of importers of covered products or equipment subject to DOE energy conservation standards exists. DOE evaluated many information sources to assess the availability of data needed to estimate the number of companies that could be both importers of products covered by this rulemaking and United States small businesses. DOE's research involved information from the Department of Commerce, the United States Census, the American Association of Exporters and Importers, the National Small Business Association, the Small Business Exporters Association, and the United States Customs and Border Protection Office. Ultimately, DOE's analysis relied most heavily on information from the Department of Commerce and the United States Census to estimate the number of affected small business importers.

    After assessing the data available, DOE relied on a three-step process for estimating the number of small business importers: (1) Determine the potentially affected industries; (2) Find the number of small businesses in each industry; (3) Estimate the number of those small businesses that import covered products or equipment subject to DOE energy conservation standards.

    Determination of potentially affected industries. To calculate the number of small businesses potentially impacted by this rule, DOE first screened out the sectors listed in Table IV.1 (using two-digit NAICS code) from consideration based on the nature of their business (i.e., businesses operating in these sectors are unlikely to be an importer of covered products or equipment subject to DOE energy conservation standards or products that contain such covered products or equipment):

    Table IV.1—NAICS Sectors Screened Out From Consideration as Potentially Impacted by Rule

    NAICSDescription
    11Agriculture.
    21Mining, Quarrying, and Oil and Gas Extraction Quarrying.
    22Utilities.
    23Construction.
    48-49Transportation and Warehousing.
    51Information.
    52Finance and Insurance.
    53Real Estate.
    54Professional, Scientific and Technical Services.
    55Management of Companies and Enterprises.
    56Administrative and Support and Waste Management and Remediation Services.
    61Educational Services.
    62Health Care and Social Assistance.
    71Arts, Entertainment, and Recreation.
    72Accommodation and Food Services.
    Start Printed Page 81210
    81Other Services, except Public Administration.
    99Unclassified.

    The industries that passed the screening are shown in Table IV.2.

    Table IV.2—NAICS Sectors (Two-Digit Code Level) Potentially Impacted by Rule

    NAICSDescription
    31-33Manufacturing.
    42Wholesale Trade.
    44-45Retail Trade.

    Next, DOE evaluated each of the two-digit sectors that passed the first screening at the most granular five-digit NAICS code level.[14] Table IV.3 shows the final industry NAICS codes DOE assumed could be affected by this rule based on the description of the industry.

    Table IV.3—NAICS Sectors (Five-Digit Code Level) Potentially Impacted by Rule

    NAICSDescription
    33241Power Boiler and Heat Exchanger Manufacturing.
    33331Commercial and Service Industry Machinery Manufacturing.
    33341Ventilation, Heating, Air-Conditioning, and Commercial Refrigeration Equipment Manufacturing.
    33361Engine, Turbine, and Power Transmission Equipment Manufacturing.
    33391Pump and Compressor Manufacturing.
    33399All Other General Purpose Machinery Manufacturing.
    33411Computer and Peripheral Equipment Manufacturing.
    33422Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing.
    33431Audio and Video Equipment Manufacturing.
    33511Electric Lamp Bulb and Part Manufacturing.
    33512Lighting Fixture Manufacturing.
    33521Small Electrical Appliance Manufacturing.
    33522Major Appliance Manufacturing.
    33531Electrical Equipment Manufacturing.
    33591Battery Manufacturing.
    33599All Other Electrical Equipment and Component Manufacturing.
    33611Automobile and Light Duty Motor Vehicle Manufacturing.
    33612Heavy Duty Truck Manufacturing.
    42342Office Equipment Merchant Wholesalers.
    42343Computer and Computer Peripheral Equipment and Software Merchant Wholesalers.
    42344Other Commercial Equipment Merchant Wholesalers.
    42361Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers.
    42362Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers.
    42369Other Electronic Parts and Equipment Merchant Wholesalers.
    42372Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers.
    42373Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers.
    42374Refrigeration Equipment and Supplies Merchant Wholesalers.
    42383Industrial Machinery and Equipment Merchant Wholesalers.
    42386Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers.
    44229Other Home Furnishings Stores.
    44314Electronics and Appliance Stores.
    45411Electronic Shopping and Mail-Order Houses.

    Calculation of small businesses in affected industries. Second, DOE used firm-size data from the United States Census to determine the number of small businesses in each five-digit NAICS code sector that passed the screening. DOE used 2012 data because it was the most recently available data and, as mentioned above, DOE used the 500-employee threshold as the small business cut off.

    Calculation of the number of small business importers. Step 3 provides the total number of small businesses in the industries that may be affected by this rulemaking. DOE is not aware of data on the share of these small businesses that act as importers. To estimate this share, DOE divided the total number of importers—Department of Commerce data from 2011 shows that there were 183,960 U.S. businesses importing to the United States—by the total number of businesses in those sectors that might be engaged in importing (1,318,818) [15] to calculate the percentage of total businesses that are importers. In this way, DOE estimated that approximately 14 percent of businesses in the remaining sectors are engaged in importing activities. Lacking more specific importer data by industry, DOE assumed this percentage represented, on average, the share of total firms in each relevant industry that were importers. DOE then multiplied this share by the number of the small businesses in each covered NAICS sector (from Step 2) to yield the number of small business importers by each of those NAICS codes, as shown in Table IV.4.

    Start Printed Page 81211

    Table IV.4—Number of Small Business Potentially Impacted by Rule

    NAICSDescriptionSmall business importers
    33241Power Boiler and Heat Exchanger Manufacturing33
    33331Commercial and Service Industry Machinery Manufacturing249
    33341Ventilation, Heating, Air-Conditioning, and Commercial Refrigeration Equipment Manufacturing204
    33361Engine, Turbine, and Power Transmission Equipment Manufacturing105
    33391Pump and Compressor Manufacturing90
    33399All Other General Purpose Machinery Manufacturing443
    33411Computer and Peripheral Equipment Manufacturing137
    33422Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing96
    33431Audio and Video Equipment Manufacturing63
    33511Electric Lamp Bulb and Part Manufacturing7
    33512Lighting Fixture Manufacturing131
    33521Small Electrical Appliance Manufacturing15
    33522Major Appliance Manufacturing18
    33531Electrical Equipment Manufacturing253
    33591Battery Manufacturing17
    33599All Other Electrical Equipment and Component Manufacturing122
    33611Automobile and Light Duty Motor Vehicle Manufacturing27
    33612Heavy Duty Truck Manufacturing7
    42342Office Equipment Merchant Wholesalers349
    42343Computer and Computer Peripheral Equipment and Software Merchant Wholesalers982
    42344Other Commercial Equipment Merchant Wholesalers508
    42361Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers1,196
    42362Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers291
    42369Other Electronic Parts and Equipment Merchant Wholesalers1,284
    42372Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers398
    42373Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers290
    42374Refrigeration Equipment and Supplies Merchant Wholesalers97
    42383Industrial Machinery and Equipment Merchant Wholesalers3,213
    42386Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers293
    44229Other Home Furnishings Stores1,408
    44314Electronics and Appliance Stores3,626
    45411Electronic Shopping and Mail-Order Houses3,989
    Total19,941

    This represents a conservative upper-bound estimate because there are companies contained in some NAICS sectors (e.g., heat exchanger manufacturers in NAICS 33241) that could be importers of non-covered products or equipment, but are included here because DOE lacks the data necessary to cull those out. The estimate of 19,941 importers includes both importers of covered products or equipment subject to DOE energy conservation standards and other end-use products meant for distribution in commerce that contain such covered products as components (e.g., any end-use product bundled with a covered external power supply or a non-covered end-use product with a covered motor.)

    2. Description and Estimate of Compliance Requirements

    DOE assumes small businesses that import covered products or equipment will have already complied with their legal obligation to certify to DOE, through CCMS, all basic models of such products or equipment, and therefore would be required to report only the following information regarding the most recent certification of the basic model of covered products or equipment subject to DOE energy conservation standards they import:

    1. The CCMS ticket number;

    2. The CCMS attachment identification number assigned to the certification submission;

    3. The line number in the submission corresponding to the basic model certified; and

    4. If the covered product or equipment is a component of a final product, the brand name and individual model number of the final product.

    The role of customs brokers. In assessing the burden of any new reporting requirements on importers, it is important to understand the process by which the typical importer complies with existing customs requirements. The vast majority of importers use customs brokers for a bundle of import-related services, including notification of regulatory requirements and aid in completing and submitting the required paperwork. For importers, who typically operate on tight schedules, delays at port can cause missed deliveries and result in heavy financial and reputational penalty. For these reasons, the job of negotiating the regulatory terrain of the import business is usually entrusted to third-party customs brokers who specialize in importation reporting requirements (among other services). Customs brokers are familiar with the necessary regulatory filings and procedures required to ensure that a shipment clears customs in a timely manner. Typically, an importer will contract with a broker who will file all necessary paperwork including the commercial invoice and any supplemental information required by various regulatory bodies. Additionally, brokers already have bond coverage to cover any duties associated with the importation and can save importers from having to post a separate bond for each shipment.

    Because this proposed rule entails only an electronic reporting requirement through ACE, DOE does not anticipate any significant incremental investment in product or capital conversion costs to comply. Currently, more than 96 percent of all entries filed with CBP are already being filed through the ABI. By the end of 2016, ACE will become the Single Window—the primary system through which the trade community will report imports and exports and the Start Printed Page 81212government will determine admissibility, with the ABI as the method through which entries and entry summaries are transmitted to ACE.[16]

    While the ABI interface helps to facilitate the process, there are new data elements proposed as reporting requirements in this NOPR. Those fall into two categories: (1) data fields that are already typically collected during the importation process and (2) those that are not.

    Data Already Collected: Based on interviews with customs brokers, DOE believes that the brand name of the final product being imported, which would be required in the instances where the covered product or equipment is a component of the final product, is on the commercial invoice that is already filed with the customs broker as part of the importation process. When required, this data can be keyed in during the electronic filing process that brokers and importers already go through and thus should have minimal impact on both the importer and customs broker.

    Data Not Currently Collected: The individual model number, required in the instances where the covered product or equipment is a component of the final product, the CCMS ticket number, the CCMS attachment identification number assigned to the certification submission, and the line number in the submission corresponding to the basic model certified are the only data fields proposed as a new reporting requirement that are not typically on any of the invoices. Depending on the product, the individual model numbers may be included on the invoice. In any case, customs brokers indicated they would most likely go to their client (the importer) to ask them for any missing information, which the importer would have as part of the process of certifying compliance to DOE.

    Furthermore, brokers maintain databases of their customers and associated products, and one of their service offerings is to be proactive with their clients in notifying them of new regulations. In interviews, brokers indicated they would likely review their customer databases to determine which companies are subject to new requirements and alert them to the additional data requirements discussed above. By contacting customers prior to the regulations going into effect, brokers can minimize the likelihood of any delays due to new DOE reporting requirements and also give customers time to prepare for the new requirements, particularly given the proposed two-year lead time.

    Therefore, DOE estimates a one-time burden of approximately twenty hours per small business importer to learn the reporting requirements and set up a system of information flow internally. DOE notes that all information should be readily available, as importers of covered products or equipment subject to energy conservation standards are already required to certify compliance.

    Because importers are currently required to submit certifications of compliance annually through CCMS, the information that would be submitted in a certification of admissibility prior to each importation of a basic model covered product or equipment (the most recent CCMS ticket number, attachment number, and line number) would need to be obtained and keyed in only once per year, for the first shipment of the covered product or equipment following the annual CCMS filing. Because this information would be readily available to the importer, DOE estimates annual burden of 0.03 hours per basic model of covered product or equipment imported by the small business importer to obtain and enter the data required for a certification of admissibility. For all subsequent certifications of admissibility submitted over the course of the year, the importer would only be required to electronically resubmit the same data, and the burden imposed by these subsequent electronic submissions would be negligible.

    Based upon information in the CCMS database, DOE estimates that, on average, each small business importer submits compliance certification reports for 157 basic models of covered product or equipment annually. Therefore, DOE estimates that the requirement of submission of certifications of admissibility proposed in this rule would result in an annual burden of approximately 4.71 hours per small business importer.

    3. Request for Comments

    DOE seeks comments on the following topics regarding this IRFA:

    (1) The five-digit NAICS codes believed to include importers of covered products or equipment subject to DOE energy conservation standards or such products or equipment with covered components.

    (2) The availability of data on the number of small business importers in sectors covered by DOE regulations.

    (3) The estimated burden associated with the reporting of individual model numbers for both importers and customs brokers.

    (4) How brokers will react to the necessary reporting requirements and if there will be any increase in costs.

    4. Duplication, Overlap, and Conflict With Other Rules and Regulations

    DOE is not aware of any rules or regulations that duplicate, overlap, or conflict with the rule being proposed.

    5. Significant Alternatives to the Rule

    This section considers alternatives to the proposals for the submission of certifications of admissibility in this rulemaking. As noted in Section III.B, DOE initially considered requiring importers to provide, in their certifications of admissibility, detailed product-specific information for all covered products and equipment subject to energy conservation standards. However, in order reduce the potential burden on importers, DOE proposes to collect this additional information only where the importer has not already certified to DOE the compliance of the product or equipment through CCMS.

    DOE could further mitigate the potential impacts on small business importers by not requiring a certification of admissibility prior to the importation of any covered consumer product or commercial and industrial equipment subject to an applicable energy conservation standard. However, DOE strongly believes the proposals in this rulemaking are essential to a sustainable and consistent enforcement program vis-à-vis imports of covered products and covered equipment. While the alternative may mitigate the potential economic impacts on small entities compared to the proposed provisions, the ability for DOE to enforce its energy conservation regulations far exceeds any potential burdens. Furthermore, small businesses may benefit from stronger enforcement against noncompliant imports. Thus, DOE rejected this alternative and is adopting the provisions set forth in this rulemaking for all importers of covered products and covered equipment. DOE continues to seek input from businesses that would be affected by this rulemaking and will consider comments received in the development of any final rule.

    C. Review Under the Paperwork Reduction Act

    1. Description of the Requirements

    DOE is proposing to require persons importing into the United States any covered consumer product or industrial equipment subject to an applicable energy conservation standard to provide a certification of admissibility to the DOE. DOE assumes that importers will have already complied with their legal obligation to certify to DOE, through CCMS, all basic models of products or Start Printed Page 81213equipment subject to DOE energy conservation standards, such that the importer would only need to identify in its certification of admissibility the most recent CCMS ticket number, attachment number, and line number for the basic model of the covered product or equipment contained in the shipment. This information would enable DOE to identify, prior to arrival at a U.S. port of entry, shipments that contain covered products or equipment that have been found to be non-compliant, allowing DOE to take appropriate proactive enforcement action. Such action could include providing notice to CBP sufficient to allow CBP to refuse admission of the non-compliant covered product or equipment into the U.S.

    2. Method of Collection

    The certification of admissibility would be required to be submitted to DOE through CPB's ACE system.

    3. Data

    The following are DOE estimates of the total annual reporting burden imposed on persons importing into the United States any covered product or equipment subject to an applicable energy conservation standard. These estimates take into account the time necessary to obtain and enter the required electronic information to be submitted to ACE. As explained in Section IV.B.3, for each basic model of covered product and equipment, the data required for a certification of admissibility would need to be obtained and entered only once per year. Subsequent certifications during the same year would only require electronic resubmission of the same data previously submitted, and the burden of each resubmission would be negligible.

    OMB Control Number: New.

    Form Number: None.

    Type of Review: Regular submission.

    Affected Public: Persons importing into the United States any covered consumer product or industrial equipment subject to an applicable energy conservation standard.

    Estimated Number of Respondents: 20,336

    Estimated Number of New Responses per Respondent Annually: 313

    Estimated Time per New Response: 0.03 hours.

    Estimated Total Annual Burden Hours: 109,955.

    Estimated Total Annual Cost to the Importers: $4,336,589 in reporting costs.

    4. Comments

    Public comment is sought regarding: Whether this proposed collection of information is necessary for the proper performance of the functions of DOE, including whether the information shall have practical utility; the accuracy of the burden estimate; ways to enhance the quality, utility, and clarity of the information to be collected; and ways to minimize the burden of the collection of information, including through the use of automated collection techniques or other forms of information technology. Send comments on these or any other aspects of the collection of information to Chad Whiteman, Desk Officer, Office of Information and Regulatory Affairs, Office of Management and Budget, Washington, DC 20503 and by email to Chad_S_Whiteman@omb.eop.gov.

    Notwithstanding any other provision of the law, no person is required to respond to, nor shall any person be subject to a penalty for failure to comply with, a collection of information subject to the requirements of the PRA, unless that collection of information displays a currently valid OMB Control Number.

    D. Review Under the National Environmental Policy Act

    DOE anticipates that this proposed rule falls into a class of actions that are categorically excluded from review under the National Environmental Policy Act of 1969 (42 U.S.C. 4321 et seq.) and DOE's implementing regulations at 10 CFR part 1021. Specifically, this proposed rule amends an existing rule without changing its environmental effect and, therefore, DOE expects that it would be covered by the Categorical Exclusion in 10 CFR part 1021, subpart D, paragraph A5. Accordingly, DOE is not preparing an environmental assessment or an environmental impact statement.

    E. Review Under Executive Order 13132

    Executive Order 13132, “Federalism,” 64 FR 43255 (August 4, 1999) imposes certain requirements on agencies formulating and implementing policies or regulations that preempt State law or that have Federalism implications. The Executive Order requires agencies to examine the constitutional and statutory authority supporting any action that would limit the policymaking discretion of the States and to carefully assess the necessity for such actions. The Executive Order also requires agencies to have an accountable process to ensure meaningful and timely input by State and local officials in the development of regulatory policies that have Federalism implications. On March 14, 2000, DOE published a statement of policy describing the intergovernmental consultation process it will follow in the development of such regulations. 65 FR 13735. DOE has examined this proposed rule and has determined that it would not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. EPCA governs and prescribes Federal preemption of State regulations as to energy conservation for the products that are the subject of this proposed rule. States can petition DOE for exemption from such preemption to the extent, and based on criteria, set forth in EPCA. (42 U.S.C. 6297(d)) No further action is required by Executive Order 13132.

    F. Review Under Executive Order 12988

    Regarding the review of existing regulations and the promulgation of new regulations, section 3(a) of Executive Order 12988, “Civil Justice Reform,” 61 FR 4729 (Feb. 7, 1996), imposes on Federal agencies the general duty to adhere to the following requirements: (1) Eliminate drafting errors and ambiguity; (2) write regulations to minimize litigation; (3) provide a clear legal standard for affected conduct rather than a general standard; and (4) promote simplification and burden reduction. Section 3(b) of Executive Order 12988 specifically requires that Executive agencies make every reasonable effort to ensure that the regulation: (1) Clearly specifies the preemptive effect, if any; (2) clearly specifies any effect on existing Federal law or regulation; (3) provides a clear legal standard for affected conduct while promoting simplification and burden reduction; (4) specifies the retroactive effect, if any; (5) adequately defines key terms; and (6) addresses other important issues affecting clarity and general draftsmanship under any guidelines issued by the Attorney General. Section 3(c) of Executive Order 12988 requires Executive agencies to review regulations in light of applicable standards in sections 3(a) and 3(b) to determine whether they are met or it is unreasonable to meet one or more of them. DOE has completed the required review and determined that, to the extent permitted by law, the proposed rule meets the relevant standards of Executive Order 12988.

    G. Review Under the Unfunded Mandates Reform Act of 1995

    Title II of the Unfunded Mandates Reform Act of 1995 (UMRA) requires each Federal agency to assess the effects of Federal regulatory actions on State, local, and Tribal governments and the private sector. Public Law 104-4, sec. 201 (codified at 2 U.S.C. 1531). For a Start Printed Page 81214proposed regulatory action likely to result in a rule that may cause the expenditure by State, local, and Tribal governments, in the aggregate, or by the private sector of $100 million or more in any one year (adjusted annually for inflation), section 202 of UMRA requires a Federal agency to publish a written statement that estimates the resulting costs, benefits, and other effects on the national economy. (2 U.S.C. 1532(a), (b)) The UMRA also requires a Federal agency to develop an effective process to permit timely input by elected officers of State, local, and Tribal governments on a proposed “significant intergovernmental mandate,” and requires an agency plan for giving notice and opportunity for timely input to potentially affected small governments before establishing any requirements that might significantly or uniquely affect small governments. On March 18, 1997, DOE published a statement of policy on its process for intergovernmental consultation under UMRA. 62 FR 12820; also available at www.gc.doe.gov. DOE examined this proposed rule according to UMRA and its statement of policy and determined that today's proposal contains neither an intergovernmental mandate, nor a mandate that may result in the expenditure of $100 million or more in any year, so these requirements do not apply.

    H. Review Under the Treasury and General Government Appropriations Act, 1999

    Section 654 of the Treasury and General Government Appropriations Act, 1999 (Pub. L. 105-277) requires Federal agencies to issue a Family Policymaking Assessment for any rule that may affect family well-being. This proposal would not have any impact on the autonomy or integrity of the family as an institution. Accordingly, DOE has concluded that it is not necessary to prepare a Family Policymaking Assessment.

    I. Review Under Executive Order 12630

    DOE has determined, under Executive Order 12630, “Governmental Actions and Interference with Constitutionally Protected Property Rights” 53 FR 8859 (March 18, 1988), that this proposal would not result in any takings that might require compensation under the Fifth Amendment to the U.S. Constitution.

    J. Review Under the Treasury and General Government Appropriations Act, 2001

    Section 515 of the Treasury and General Government Appropriations Act, 2001 (44 U.S.C. 3516 note) provides for agencies to review most disseminations of information to the public under guidelines established by each agency pursuant to general guidelines issued by OMB. OMB's guidelines were published at 67 FR 8452 (February 22, 2002), and DOE's guidelines were published at 67 FR 62446 (October 7, 2002). DOE has reviewed this proposed rule under the OMB and DOE guidelines and has concluded that it is consistent with applicable policies in those guidelines.

    K. Review Under Executive Order 13211

    Executive Order 13211, “Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use” 66 FR 28355 (May 22, 2001), requires Federal agencies to prepare and submit to OIRA at OMB, a Statement of Energy Effects for any proposed significant energy action. A “significant energy action” is defined as any action by an agency that promulgates or is expected to lead to promulgation of a final rule, and that (1) is a significant regulatory action under Executive Order 12866, or any successor order; and (2) is likely to have a significant adverse effect on the supply, distribution, or use of energy, or (3) is designated by the Administrator of OIRA as a significant energy action. For any proposed significant energy action, the agency must give a detailed statement of any adverse effects on energy supply, distribution, or use should the proposal be implemented, and of reasonable alternatives to the action and their expected benefits on energy supply, distribution, and use.

    DOE has tentatively concluded that today's proposed regulatory action, which sets forth a proposed requirement for the submission of a certification of admissibility to DOE by importers of products or equipment subject to energy conservation standards, is not a significant energy action because the requirement is not likely to have a significant adverse effect on the supply, distribution, or use of energy, nor has it been designated as such by the Administrator at OIRA. Accordingly, DOE has not prepared a Statement of Energy Effects on the proposed rule.

    V. Public Participation

    A. Submission of Comments

    DOE will accept comments, data, and information regarding this proposed rule before or after the public meeting, but no later than the date provided in the DATES section at the beginning of this proposed rule. Interested parties may submit comments using any of the methods described in the ADDRESSES section at the beginning of this notice.

    Submitting comments via www.regulations.gov. The regulations.gov Web page will require you to provide your name and contact information. Your contact information will be viewable to DOE Building Technologies staff only. Your contact information will not be publicly viewable except for your first and last names, organization name (if any), and submitter representative name (if any). If your comment is not processed properly because of technical difficulties, DOE will use this information to contact you. If DOE cannot read your comment due to technical difficulties and cannot contact you for clarification, DOE may not be able to consider your comment.

    However, your contact information will be publicly viewable if you include it in the comment or in any documents attached to your comment. Any information that you do not want to be publicly viewable should not be included in your comment, nor in any document attached to your comment. Persons viewing comments will see only first and last names, organization names, correspondence containing comments, and any documents submitted with the comments.

    Do not submit to regulations.gov information for which disclosure is restricted by statute, such as trade secrets and commercial or financial information (hereinafter referred to as Confidential Business Information (CBI)). Comments submitted through regulations.gov cannot be claimed as CBI. Comments received through the Web site will waive any CBI claims for the information submitted. For information on submitting CBI, see the Confidential Business Information section.

    DOE processes submissions made through regulations.gov before posting. Normally, comments will be posted within a few days of being submitted. However, if large volumes of comments are being processed simultaneously, your comment may not be viewable for up to several weeks. Please keep the comment tracking number that regulations.gov provides after you have successfully uploaded your comment.

    Submitting comments via email, hand delivery, or mail. Comments and documents submitted via email, hand delivery, or mail also will be posted to regulations.gov. If you do not want your personal contact information to be publicly viewable, do not include it in your comment or any accompanying documents. Instead, provide your contact information on a cover letter. Start Printed Page 81215Include your first and last names, email address, telephone number, and optional mailing address. The cover letter will not be publicly viewable as long as it does not include any comments.

    Include contact information each time you submit comments, data, documents, and other information to DOE. If you submit via mail or hand delivery, please provide all items on a compact disk (CD), if feasible. It is not necessary to submit printed copies. No facsimiles (faxes) will be accepted.

    Comments, data, and other information submitted to DOE electronically should be provided in PDF (preferred), Microsoft Word or Excel, WordPerfect, or text (ASCII) file format. Provide documents that are not secured, written in English and are free of any defects or viruses. Documents should not contain special characters or any form of encryption and, if possible, they should carry the electronic signature of the author.

    Campaign form letters. Please submit campaign form letters by the originating organization in batches of between 50 to 500 form letters per PDF or as one form letter with a list of supporters' names compiled into one or more PDFs. This reduces comment processing and posting time.

    Confidential Business Information. According to 10 CFR 1004.11, any person submitting information that he or she believes to be confidential and exempt by law from public disclosure should submit via email, postal mail, or hand delivery two well-marked copies: One copy of the document marked confidential including all the information believed to be confidential, and one copy of the document marked non-confidential with the information believed to be confidential deleted. Submit these documents via email or on a CD, if feasible. DOE will make its own determination about the confidential status of the information and treat it according to its determination.

    Factors of interest to DOE when evaluating requests to treat submitted information as confidential include: (1) A description of the items; (2) whether and why such items are customarily treated as confidential within the industry; (3) whether the information is generally known by or available from other sources; (4) whether the information has previously been made available to others without obligation concerning its confidentiality; (5) an explanation of the competitive injury to the submitting person which would result from public disclosure; (6) when such information might lose its confidential character due to the passage of time; and (7) why disclosure of the information would be contrary to the public interest.

    It is DOE's policy that all comments may be included in the public docket, without change and as received, including any personal information provided in the comments (except information deemed to be exempt from public disclosure).

    B. Issues on Which DOE Seeks Comment

    Although DOE welcomes comments on any aspect of this proposal, DOE is particularly interested in receiving comments and views of interested parties concerning the following issues:

    1. DOE requests comment on the requirement that importers importing covered products or equipment subject to DOE energy conservation standards that are within the listed HTS codes provide a certification of admissibility to DOE. Further, DOE requests comment as to whether covered products or equipment subject to or are being considered for DOE energy conservation standards are currently imported using other HTS codes.

    2. DOE requests comment on its proposal to require, for a shipment that contains covered products or equipment subject to a DOE energy conservation standard, that the importer state whether the product or equipment has been certified to DOE as compliant with all applicable energy conservation standards and, if so, provide the CCMS ticket number, the CCMS attachment identification number, and line number associated with the specific basic model.

    3. DOE requests comment on the requirement that importers submit a certification of admissibility to DOE for all covered products and equipment subject to an energy conservation standard that is contained in the shipment, either as a final product or a component part of a final product.

    4. DOE requests comment on requiring importers to indicate in the import declaration to DOE whether the covered product or equipment being imported and subject to DOE energy conservation standards is a final product or a component of a final product and, if the covered product or equipment is a component, the brand name and individual model number of the final product. DOE also requests comment regarding whether the reporting burden on importers would be less to provide this information as part of the certification of admissibility or as part of a compliance certification report submitted through CCMS.

    5. DOE requests comment on its proposal to collect additional product-specific information only (e.g., brand, individual model number) regarding imported covered products and equipment subject to energy conservation standards that the importer has not certified to DOE as meeting applicable energy conservation standards, and whether, as DOE anticipates, this would result in less burden to those required to file certifications of admissibility.

    6. DOE requests comment on requiring importers to file the certification of admissibility through ACE.

    VI. Approval of the Office of the Secretary

    The Secretary of Energy has approved publication of this proposed rule.

    Start List of Subjects

    List of Subjects in 10 CFR Part 429

    • Confidential business information
    • Energy conservation
    • Household appliances
    • Imports
    • Reporting and recordkeeping requirements
    End List of Subjects Start Signature

    Issued in Washington, DC, on December 18, 2015.

    Kathleen B. Hogan,

    Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy.

    Steven P. Croley,

    General Counsel.

    End Signature

    For the reasons stated in the preamble, DOE is proposing to amend part 429 of chapter II, subchapter D of title 10, Code of Federal Regulations, as set forth below:

    Start Part

    PART 429—CERTIFICATION, COMPLIANCE, AND ENFORCEMENT FOR CONSUMER PRODUCTS AND COMMERCIAL AND INDUSTRIAL EQUIPMENT

    End Part Start Amendment Part

    1. The authority citation for part 429 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 42 U.S.C. 6291-6317

    End Authority Start Amendment Part

    2. Section 429.2 is amended by removing the definition of “manufacturer's model number” and adding in alphabetical order the definitions of “individual model number” and “original equipment manufacturer” to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Individual model number means the identifier used by a manufacturer to uniquely identify the group of identical or essentially identical covered products or covered equipment to which a particular unit belongs. The individual model number typically appears on the product nameplates, in product Start Printed Page 81216catalogs, and in other product advertising literature.

    Original equipment manufacturer or OEM means any person who produces or assembles a unit of a covered product or covered equipment. Only one OEM is responsible for the manufacture (production or assembly) of a particular unit.

    Start Amendment Part

    3. Section 429.5 is amended by adding paragraph (c) to read as follows:

    End Amendment Part
    Imported products.
    * * * * *

    (c) Any person importing a unit of a covered product or covered equipment subject to an applicable energy conservation standard set forth in parts 430 or 431 of this chapter for entry into the United States on or after [2 YEARS AFTER DATE OF PUBLICATION OF FINAL RULE IN THE FEDERAL REGISTER], whether the unit is a component part of another product or a final product, must provide a certification of admissibility to the Secretary in accordance with § 429.500.

    Start Amendment Part

    4. Section 429.7 is amended by revising paragraph (b) to read as follows:

    End Amendment Part
    Confidentiality.
    * * * * *

    (b) An individual model number is public information unless:

    (1) The individual model number is a unique model number of a commercial packaged boiler, commercial water heating equipment, commercial HVAC equipment or commercial refrigeration equipment that was developed for an individual customer,

    (2) The individual model number is not displayed on product literature, and

    (3) Disclosure of the individual model number would reveal confidential business information as described at § 1004.11 of this title—in which case, under these limited circumstances, a manufacturer may identify the individual model number as a private model number on a certification report submitted pursuant to § 429.12(b)(6).

    * * * * *
    Start Amendment Part

    5. Section 429.12 is amended by revising paragraph (b)(6) to read as follows:

    End Amendment Part
    General requirements applicable to certification reports.
    * * * * *

    (b) * * *

    (6) For each brand, the basic model number and the individual model number(s) in that basic model with the following exceptions: For walk-in coolers, the basic model number for each brand must be submitted. For distribution transformers, the basic model number or kVA grouping model number (depending on the certification method) for each brand must be submitted. For commercial HVAC, WH, and refrigeration equipment, an individual model number may be identified as a “private model number” if it meets the requirements of § 429.7(b).

    * * * * *
    Start Amendment Part

    6. Section 429.500 is added to read as follows:

    End Amendment Part
    Certification of admissibility.

    (a) A certification of admissibility submitted pursuant to § 429.5(c) must meet the provisions of this section.

    (b) The certification must be submitted through the Automated Commercial Environment (ACE) of the U.S. Customs and Border Protection (CBP) before the entry of the unit(s) at the port of arrival.

    (c) The certification must include whether the basic model of the product or equipment being imported has been certified to DOE as compliant with all applicable energy conservation standards;

    (d) If the importer has not submitted a certification report for the basic model of the product or equipment being imported pursuant to § 429.12, the certification of admissibility must include:

    (1) The type of product or equipment (using a three-digit code corresponding to the applicable section in 10 CFR part 429, subpart B);

    (2) The brand name of the covered product or equipment;

    (3) The individual model number of the covered product or equipment;

    (4) Whether the covered product or equipment being imported is a final product or a component of a final product and, if the covered product or equipment is a component, the brand name and individual model number of the final product;

    (5) The original equipment manufacturer (OEM) of the covered product or equipment being imported as defined in § 429.2 and, in the case of electric motors, the Compliance Certification number; and

    (6) A contact name and email address of the importer of record.

    (e) If the importer has submitted a certification report for the basic model of the product or equipment being imported pursuant to § 429.12, the certification of admissibility must include:

    (1)The CCMS ticket number of the most recent certification submission;

    (2)The CCMS attachment identification number assigned to the certification submission;

    (3) The line number in the submission corresponding to the basic model certified; and

    (4) If the covered product or equipment is a component of a final product, the brand name and individual model number of the final product.

    End Supplemental Information

    Footnotes

    1.  For editorial reasons, upon codification in the U.S. Code, Part B was redesignated Part A.

    Back to Citation

    2.  All references to EPCA in this document refer to the statute as amended through the Energy Efficiency Improvement Act of 2015, Public Law 114-11 (Apr. 30, 2015).

    Back to Citation

    3.  For editorial reasons, upon codification in the U.S. Code, Part C was redesignated Part A-1.

    Back to Citation

    4.  Section 6302(a)(5) states that it is unlawful for any “manufacturer” to “distribute in commerce” products that do not conform to applicable energy conservations standards. Section 6291 defines the term “manufacturers” so as to include importers, and states that “to distribute in commerce” means, among other things, “to import.” (42 U.S.C. 6291(10), (12), (16)).

    Back to Citation

    5.  Under DOE regulations, “energy conservation standard” is defined as any standard “meeting the definitions of that term in 42 U.S.C. 6291(6) and 42 U.S.C. 6311(18) as well as any other water conservation standards and design requirements found” in 10 CFR parts 429, 430, or 431. (10 CFR 429.2(b))

    Back to Citation

    6.  10 CFR parts 430 and 431 do not apply to covered products or equipment imported for export from the United States, provided that such products or equipment “or any container in which it is enclosed, when distributed in commerce, bears a stamp or label stating `NOT FOR SALE FOR USE IN THE UNITED STATES' ” and “such product is, in fact, not distributed in commerce for use in the United States.” (10 CFR 429.6). See also CBP Ruling No. HQ W231173 (“equipment subject to the standards set by the Department of Energy under 10 CFR 430.32 that are not in compliance with those standards, may be imported into the United States for the purpose of exportation, and placed in either a foreign trade zone or customs bonded warehouse pursuant to that purpose”), available at http://rulings.cbp.gov/​index.asp?​ru=​w231173&​qu=​CBP+​Ruling+​HQ+​W231173&​vw=​detail.

    Back to Citation

    8.  The HTS codes that would require a certification to DOE would be updated to reflect the then-current version of the HTS.

    Back to Citation

    9.  DOE anticipates that it would subsequently amend any relevant product-specific sections as necessary to harmonize with these proposed definitional changes.

    Back to Citation

    10.  Under current regulations, DOE provides manufacturers of covered electric motors with a unique “Compliance Certification number.” 10 CFR 431.36(f). DOE anticipates issuing a rule regarding compliance certification of electric motors in the near future. DOE may make conforming changes to a final rule in this rulemaking as appropriate based on any regulatory changes made in that rulemaking. See RIN:1904-AD25.

    Back to Citation

    11.  Available at http://laws-lois.justice.gc.ca/​eng/​regulations/​SOR-94-651/​page-2.html#h-3. Canada collects the following five pieces of information: (1) The name of the product using one of the names set forth in their regulations; (2) the model number or unique motor identifier of the product, as the case may be; (3) the brand, if any, of the product; (4) the address of the dealer; and (5) whether the product is being imported for sale or lease in Canada without modification, sale or lease in Canada after being modified to comply with the applicable energy efficiency standard, or use as a component for incorporation into any other product that is to be exported from Canada.

    Back to Citation

    12.  This table is illustrative only. For example, the table does not reflect product types for which standards are being considered, but have not yet been adopted.

    Back to Citation

    13.  DOE anticipates issuing a Notice of Proposed Rulemaking to revise Part 429. That rulemaking would likely change the regulatory structure to provide a three-digit numbering system.

    Back to Citation

    14.  NAICS codes can be disaggregated into discrete non-overlapping subsets of firms based on their primary business activity.

    Back to Citation

    15.  This value was determined by subtracting the number of businesses in NAICS sectors not engaged in importing from the total number of businesses according to the Census. This was necessary because the data on the total number of importers could not be disaggregated in meaningful detail, but clearly some industries (such as services) are much less likely to have a significant presence in importing when compared to wholesale, manufacturing, and retail.

    Back to Citation

    [FR Doc. 2015-32796 Filed 12-28-15; 8:45 am]

    BILLING CODE 6450-01-P

Document Information

Published:
12/29/2015
Department:
Energy Department
Entry Type:
Proposed Rule
Action:
Notice of proposed rulemaking.
Document Number:
2015-32796
Dates:
DOE will accept comments, data, and information regarding this notice of proposed rulemaking (NOPR) no later than February 12, 2016. See section V, ``Public Participation,'' of this NOPR for details.
Pages:
81199-81216 (18 pages)
Docket Numbers:
Docket No. EERE-2015-BT-CE-0019
RINs:
1990-AA44: Energy Conservation Program: Certification and Enforcement--Import Data Collection
RIN Links:
https://www.federalregister.gov/regulations/1990-AA44/energy-conservation-program-certification-and-enforcement-import-data-collection
Topics:
Confidential business information, Energy conservation, Household appliances, Imports, Reporting and recordkeeping requirements
PDF File:
2015-32796.pdf
Supporting Documents:
» 2016-02-19 Public Meeting Transcript: U.S. Department Of Energy, Energy and Conservation Certification and Enforcement Program, Import Data Collection Meeting Notice of Proposed Rulemaking
» 2016-02-19 NOPR Public Meeting Presentation: Energy Conservation Program: Certification and Enforcement-- Import Data Collection Notice of Proposed Rulemaking
CFR: (5)
10 CFR 429.2
10 CFR 429.5
10 CFR 429.7
10 CFR 429.12
10 CFR 429.500