[Federal Register Volume 62, Number 220 (Friday, November 14, 1997)]
[Rules and Regulations]
[Pages 61011-61012]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 97-29956]
=======================================================================
-----------------------------------------------------------------------
OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION
29 CFR Part 2200
Rules of Procedure for E-Z Trials
AGENCY: Occupational Safety and Health Review Commission.
ACTION: Final rule; correcting amendment.
-----------------------------------------------------------------------
SUMMARY: This document restores the selection provision for commencing
E-Z Trial, 29 CFR 2200.203(a), which was inadvertently removed.
DATES: November 14, 1997.
FOR FURTHER INFORMATION CONTACT:
Earl R. Ohman, Jr., General Counsel, (202) 606-5410, Occupational
Safety and Health Review Commission, 1120 20th Street NW., 9th Floor,
Washington, DC 20036-3419.
SUPPLEMENTARY INFORMATION: On October 30, 1997, (62 FR 58650),
paragraph (a) of Sec. 2200.203 was inadvertently removed. In order for
the Rules of Procedures for E-Z trial to operate effectively, paragraph
(a) must be restored.
List of Subjects in 29 CFR Part 2200
Administrative practice and procedure, Hearing and appeal
procedures.
For the reasons set forth in the preamble, the Occupational Safety
and Health Review Commission amends Title 29, Chapter XX, Part 2200,
Subpart M of the Code of Federal Regulations as follows:
PART 2200--RULES OF PROCEDURE
1. The authority citation continues to read as follows:
Authority: 29 U.S.C. 661(g).
2. Section 2200.203 is amended by adding paragraph (a), to read as
follow:
[[Page 61012]]
Sec. 2200.203 Commencing E-Z Trial.
(a) Selection. Upon receipt of a Notice of Contest, the Chief
Administrative Law Judge may, at his or her discretion, assign an
appropriate case for E-Z Trial.
* * * * *
Dated: November 7, 1997.
Earl R. Ohman, Jr.,
General Counsel.
[FR Doc. 97-29956 Filed 11-13-97; 8:45 am]
BILLING CODE 7600-01-M
