eLaws | eCases | United States Code | Federal Courts |
Home » 2011 Issues » 76 FR (05/13/2011) » C1-2011-9421. Safety Standard for Toddler Beds

  C1-2011-9421. Safety Standard for Toddler Beds  

  • Start Preamble

    Correction

    In rule document 2011-9421 beginning on page 22019 in the issue of Wednesday, April 20, 2011, make the following correction:

    [Corrected]

    On page 22029, in § 1217.2(c)(6), at the bottom of the page, insert §§ 1217.2(c)(6)(iii), 1217.2(c)(6)(iv), and 1217.2(c)(7), which should read:

    (iii) 8.4.4 Toddler beds that convert from a full-size crib, also known as convertible cribs, must meet the warning requirements specified in section 8 of ASTM F 1169-10, instead of the requirements of 8.4.3. See 16 CFR Part 1219 for complete requirements for full-size cribs.

    (iv) 8.4.5 Any toddler bed that can convert from a full-size crib, and has the warning specified in section 8.1.3 of ASTM F 1169-10, must include additional text at the end of that warning that specifies the minimum mattress thickness of 4 inches (100 mm). See 16 CFR Part 1219 for complete requirements for full-size cribs.

    (7) In addition to figure 10 of ASTM F 1821-09, use the following:

    End Preamble

    [FR Doc. C1-2011-9421 Filed 5-12-11; 8:45 am]

    BILLING CODE 1505-01-D

Visit the Official Version
Leave a Comment

Document Information

Comments Received:
0 Comments
Published:
05/13/2011
Department:
Consumer Product Safety Commission
Entry Type:
Rule
Document Number:
C1-2011-9421
Pages:
27882-27882 (1 pages)
RINs:
3041-AC79: Drawstrings
RIN Links:
https://www.federalregister.gov/regulations/3041-AC79/drawstrings
PDF File:
c1-2011-9421.pdf