E6-15092. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 14, 2006 to August 25, 2006, consists of the PMNs consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before October 13, 2006.

ADDRESSES:

Submit your comments, identified by docket identification (ID) no. EPA-HQ-OPPT-2006-0768, by one of the following methods.

• http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO, EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2006-0768. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
• Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2006-0768. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the regulations.gov index. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket, EPA Docket Center (EPA/DC). The EPA suffered structural damage due to flooding in June 2006. Although the EPA/DC is continuing operations, there will be temporary changes to the EPA/DC during the clean-up. The EPA/DC Public Reading Room, which was temporarily closed due to flooding, has been relocated in the EPA Headquarters Library, Infoterra Room (Room Number 3334) in the EPA West Building, located at 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. EPA visitors are required to show photographic identification and sign the EPA visitor log. Visitors to the EPA/DC Public Reading Room location will be provided with an EPA/DC badge that must be visible at all times while in the EPA Building and returned to the guard upon departure. In addition, security personnel will escort visitors to and from the new EPA/DC Public Reading Room location. Up-to-date information about the EPA/DC is on the EPA web site at http://www.epa.gov/​epahome/​dockets.htm.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions - The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at the estimate.

vi. Provide specific examples to illustrate your concerns, and suggested alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 14, 2006 to August 25, 2006, consists of the PMNs consists of PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 43 Premanufacture Notices Received From: 08/14/06 to 08/25/06

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-06-0722	08/14/06	11/11/06	Dupont Company	(G) Intermediate raw material for polymer production	(G) Salt of amine with aromatic acid
P-06-0723	08/14/06	11/11/06	Dupont Company	(G) Extrusion compounding resin; molding resin	(G) Aromatic and aliphatic polyamide
P-06-0724	08/14/06	11/11/06	Quest International Flavors and Fragrances, Inc.	(S) Fragrance ingredient	(S) Butanamide, 2-ethyl-N-methyl-N-(3-methylphenyl)-
P-06-0725	08/14/06	11/11/06	CBI	(S) Ore floatation chemical in mining operations	(G) Propyl heptanol distillation residues
P-06-0726	08/14/06	11/11/06	CBI	(G) Automotive coatings	(G) Cyclical acid, polymer with isocyanate, diols, diacids, alkanolamine, amine salt
P-06-0727	08/14/06	11/11/06	CIBA Specialty Chemicals Corporation	(G) Paper additive	(G) Substituted benzenemethanaminium chloride/acrylamide/acrylic acid polymer
P-06-0728	08/14/06	11/11/06	Inx International Ink Co.	(G) Open, non-dispersive use	(G) Cyclohexane, 5-isocyanato-1-(isocyanatomethyl)-1.3.3.-trimethyl-, polymer with hexanedioic acid, 1,4-butanediol, 2,2-dimethyl-1.3-propanediol and polypropyleneglycol
P-06-0729	08/14/06	11/11/06	Inx International Ink Co.	(G) Open, non-dispersive use	(G) Cyclohexane, 5-isocyanato-1-(isocyanatomethyl)-1.3.3-trimethyl-, polymer with hexanedioic acid, 3-methyl-1.5-pentanediol, polypropyleneglycol and cyclohexanemethanamine,5-amino-1.3.3-trimethyl-
P-06-0730	08/15/06	11/12/06	Inx International Ink Co.	(G) Open, non-dispersive use	(G) Cyclohexane, 5-isocyanato-1-(isocyanatomethyl)-1.3.3.-trimethyl-, polymer with hexanedioic acid, 3-methyl-1.5pentanediol, and cyclohexanemethanamine, 5-amino-1.3.3-trimethyl-
P-06-0731	08/15/06	11/12/06	CBI	(G) Open, non-dispersive (resin)	(G) 1,4-benzenediamine, N′-(alkyl)-N-[4-[(alkyl)amino]phenyl]-N-phenyl-
P-06-0732	08/16/06	11/13/06	CBI	(G) Surface treament agent	(G) Fluoropolyether derivative fluoronated polyurethane resin
P-06-0733	08/16/06	11/13/06	CBI	(G) Raw material	(G) Amines branched and linear alkyl
P-06-0734	08/16/06	11/13/06	CBI	(G) Highly dispersive use	(G) Substituted phenol alkenylester
P-06-0735	08/16/06	11/13/06	CBI	(G) Adhesion reduction	(G) Methyl-pyrrilidone distn. residues
P-06-0736	08/16/06	11/13/06	CBI	(G) Adhesion reduction	(G) Butynediol distn. residues
P-06-0737	08/16/06	11/13/06	3M Company	(G) Melt additive	(G) Substituted melamine
P-06-0738	08/16/06	11/13/06	CBI	(G) Crosslinker	(G) Ethanediol tetramethylxylylene diisocyanate polymer
P-06-0739	08/18/06	11/15/06	Degussa Corporation	(G) Adhesive for textile / clothes applications	(G) Aliphatic dicarboxylic acid polymer with alkanediamine and lactam
P-06-0740	08/21/06	11/18/06	Huntsman Corporation	(S) Intermediate for epoxy curing agent	(G) Polyglycol
P-06-0741	08/18/06	11/15/06	CBI	(G) Open non-dispersive coating	(G) Polyurethane acrylate
P-06-0742	08/18/06	11/15/06	CBI	(S) Raw material	(G) Amines branched and linear alkyl
P-06-0743	08/18/06	11/15/06	CBI	(S) Alkylamino hafnium salt usded in chemical vapor deposition methods during the manufacture or processing of semiconductors	(G) Alkylamino hafnium salt
P-06-0744	08/18/06	11/15/06	CBI	(G) Pigment formulation additive	(G) 2-oxepanone, polymer with azirizine and tetrahydro-2 h-pyran-2-one, alkanoate, compound with phenyloxirane polymer with oxirane mono(dihydrogen phosphate) alkyl ether
P-06-0745	08/18/06	11/15/06	CBI	(G) Additive for release coatings	(G) Siloxanes and silicones, di-alkyl, alkyl 2-[(1-oxo-2-propenyl)oxy]alkoxy
P-06-0746	08/21/06	11/18/06	Quest International Flavors and Fragrances, Inc.	(S) Fragrance ingredient	(S) Pyridine, 2-(2,4-dimethylcyclohexyl)-
P-06-0747	08/21/06	11/18/06	CBI	(G) Adhesive additive for open, non-dispersive use	(G) [N-(alkylbenzyl)-N, N-dimethylanilinium] [(halomethylsulfonyl)imide)]
P-06-0748	08/21/06	11/18/06	Huntsman Corporation	(S) Epoxy curing agent	(G) Polyetheramine
P-06-0749	08/21/06	11/18/06	CBI	(G) Biodiesel additive	(S) 2,5-furandione, polymer with 1-hexadecene, .alpha.-methyl-.omega.-(2-propenyloxy)poly(oxy-1,2-ethanediyl) and 1-tetradecene, dodecyl hexadecyl ester
P-06-0750	08/21/06	11/18/06	CBI	(G) Biodiesel additive	(S) 2,5-furandione,polymer with 1-hexadecene, .alpha.-methyl-.omega.-(2-propenyloxy)poly(oxy-1,2-ethanediyl) and 1-tetradecene, lauryl amide
P-06-0751	08/21/06	11/18/06	CBI	(G) Adhesion	(G) Urethane resin
P-06-0752	08/21/06	11/18/06	CBI	(G) Adhesive for electrical parts	(G) Modified imidazole
P-06-0753	08/22/06	11/19/06	CBI	(S) Crosslinking agent for powder coatings	(G) Polymer of isophorone diisocyanate and aliphatic diol/aliphatic dicarboxylic acid
P-06-0754	08/23/06	11/20/06	CBI	(G) Diluent for paint	(G) Propylene glycol mono fatty acid ester
P-06-0755	08/23/06	11/20/06	E. I. Dupont De Nemours and Co.	(G) Catalyst used in polymerization	(S) Titanium phosphate glycolate complex
P-06-0756	08/23/06	11/20/06	CBI	(G) Industrial coatings additive	(G) 2-propenoic acid, 2-methyl-, 2-(dimethylamino)ethyl ester, polymer wiyh alkyl 2-propenoate, ethenylbenzene and 2-hydroxyethyl 2-propenoate, acetate (salt) formate (salt)
P-06-0757	08/23/06	11/20/06	CBI	(S) Organic synthesis intermediate	(G) Spiro[isobenzofuran-1(3 h), polyheterocycle]-3-one, 3′-chloro-6′-(2,3-hidihydro-3,3,5-trimethyl-1 h-indol-1-yl)-4,5,6,7-tetrafluro-
P-06-0758	08/23/06	11/20/06	CBI	(S) Organic synthesis intermediate	(G) Polyheterocycle, 2,3-dihydro-3,3,5-trimethyl-, hydrochloride
P-06-0759	08/23/06	11/20/06	CBI	(S) Organic synthesis intermediate	(G) Acetamide, N-(4-methylphenyl)-N-(alkenyl)-
P-06-0760	08/23/06	11/20/06	CBI	(S) Organic synthesis intermediate	(G) heteropolycycle,1-acetyl-2,3dihydro-3,3,5-trimethyl
P-06-0761	08/23/06	11/20/06	CBI	(G) Component of manufactured consumer article - contained use	(G) Spiro[isobenzofuran-1(3 h), polyheterocycle]-3-one, 3′-(2,3-dihydro-3,3,5-trimethyl-1 h-indol-1-yl)-6′-[(2,4-dimethylphenyl)amino]-4,5,6,7-tetrafluro-
P-06-0762	08/23/06	11/20/06	CBI	(S) Organic synthesis intermediate	(G) Polyheterocycle, 2,3-dihydro-3,3,5-trimethyl-
P-06-0763	08/22/06	11/19/06	NA Industries, Inc.	(G) Raw material for cleaner	(S) Aspartic acid, N-[(1s)-1,2-dicarboxyethyl]-3-hydroxy-, tetrasodium salt
P-06-0764	08/23/06	11/20/06	Stratcor, Inc.	(G) Infared heat absorbing component in packaging plastics	(S) Vanadium oxide (v4o7)

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 4 Notices of Commencement From: 08/14/06 to 08/25/06

Case No.	Received Date	Commencement Notice End Date	Chemical
P-04-0556	08/11/06	07/20/06	(G) 2-propenoic acid, 2-methyl-,alkyl ester, telomer with butyl-2-propenoate, 2-(dimethylamino)ethyl 2-methyl-2-propenoate, 1-dodecanethiol, ethenylbenzene, and 2-hydroxyethyl-2-propenoate, carbonoperoxoic acid, 00-(1,1-dimethylethyl) 0-(2-ethylhexyl) ester initiated
P-05-0225	08/11/06	07/18/06	(G) Imidazole, reaction products with trimethoxy[3-(oxiranylmethoxy)propyl]silane
P-06-0401	08/16/06	08/11/06	(G) (A) dihydromethylaryl pyrrolopyrroledione, (B) dihydromethylaryl alkyloxyphenyl pyrrolopyrroledione, (C) dihydroalkyloxyphenyl pyrrolopyrroledione
P-06-0431	08/15/06	07/20/06	(G) Styrenated terpene resin

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: August 31, 2006.

Eyvone Petty-Callier,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.