National Emission Standards for Hazardous Air Pollutants: Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources
Document ID: EPA-HQ-OAR-2005-0526-0001
Comments
Total: 112
-
Comment submitted by Nolan Penney, Air and Radiation Management Administration of the Maryland Department of the Environment (MDE)
Posted : 10/17/2007 ID :EPA-HQ-OAR-2005-0526-0077 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Susan E. Peterson, Wisconsin Auto Collision Technicians Association Ltd. (WACTAL)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0078 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Mike Schultz, Environmental Manager, General Dynamics C4 Systems
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0079 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by John A. Roof and Betsy A. Roof, General Store Furniture Restoration
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0080 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Harjit S. Galhotra, President, Galson Auto & Body
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0081 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Robert L. Redding, Jr., Washington, D.C. Representative, Automotive Service Association (ASA)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0082 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Hoai B. Huynh, Director, Environment, Safety & Health, Aerospace Industries Association of America (AIA)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0083 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Valerie Ughetta, Director of Stationary Sources, Alliance of Automobile Manufacturers (Alliance)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0084 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Douglas I. Greenhaus, Director, Environment, Health and Safety, The National Automobile Dealers Association (NADA)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0085 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by David J. Shaw, Director, Division of Air Resources, New York State Department of Environmental Conservation (NYSDEC)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0086 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Stephen P. Risotto, Executive Director, Halogenated Solvents Industry Alliance, Inc. (HSIA)
Posted : 10/18/2007 ID :EPA-HQ-OAR-2005-0526-0087 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Kathryn W. Lauerman, Chairman, Colorado Compliance Advisory Panel (CAP) for the Small Business Assistance Program (SBAP)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0088 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Bruce A. Hopkins, Vice President, Standards and Education, Recreation Vehicle Industry Association (RVIA)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0089 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Vinson Hellwig, Co-Chair, Michigan, National Association of Clean Air Agencies (NACAA), and Robert Colby, Co-Chair, Chattanooga, Tennessee, National Association of Clean Air Agencies (NACAA)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0090 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Lorraine Krupa Gershman, Director, Regulatory and Technical Affairs, American Chemistry Council (ACC)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0091 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by John Schweitzer, Senior Director of Government Affairs, American Composites Manufacturers Association (ACMA)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0092 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Matthew Todd, Regulatory Analyst, American Petroleum Institute (API)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0093 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by James Brooks, Bureau Director, Bureau of Air Quality, State of Maine Department of Environmental Protection (MDEP)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0094 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Stephen V. Capone, Air Regulatory Programs Leader, Saudi Basic Industries Corporation (SABIC) Innovative Plastics US LLC (formerly GE Plastics)
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0095 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by James D. Jones, Senior Consultant, Alcoa Inc.
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0096 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Eric L. Hiser, Attorney, Jordan Bischoff & Hiser, P.L.C., on behalf of Nucor Corporation ("Nucor")
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0097 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Colin P. Carroll, Regulatory Counsel, Obadal, Filler, MacLeod & Klein on behalf of Aeronautical Repair Station Association, et al.
Posted : 10/19/2007 ID :EPA-HQ-OAR-2005-0526-0098 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Lois McQuade, Senior Project Manager, TITAN Engineering, Inc. (TITAN)
Posted : 10/20/2007 ID :EPA-HQ-OAR-2005-0526-0099 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Alan Bahl, EHS Team Member, BASF Corporation
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0100 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by C. Arnold
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0101 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Kurt Chellberg, Tecor Inc.
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0102 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Lester W. Young, Principal Consultant, Applied Automotive Strategies, LLC
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0103 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Janet G. Bounds, Senior Environmental Geologist, MidContinent/Alaska SBU, Union Oil Company of California (UOCC), Chevron North America Exploration and Production
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0104 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Jim Enright, Senior Product Engineer, Research Products Corporation
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0105 Agency : EPA -
Nov 01,2007 11:59 PM ET
-
Comment submitted by Kent VonBehren, President and Angela H. Jones, Environmental Health and Safety Director, Medallion Refinish System
Posted : 10/22/2007 ID :EPA-HQ-OAR-2005-0526-0106 Agency : EPA -
Nov 01,2007 11:59 PM ET