eLaws | eCases | United States Code | Federal Courts |
Home » Rulemaking » National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Plating and Polishing Operations

National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Plating and Polishing Operations

Document ID: EPA-HQ-OAR-2005-0084-0008
Document Type: Proposed Rule
Agency: Environmental Protection Agency
Topics: Air Pollution Control, Environmental Protection, Hazardous Substances, Incorporation by Reference, Reporting and Recordkeeping Requirements
Federal Register Number: E8-04974
CFR Citation: 40 CFR 63
View Document:  View as format pdf View as format html

Details Information

Abstract: Federal Register of March 14, 2008, (73 FR 1125) (FRL-8541-9)
Document Subtype: Federal Register Document
Received Date: March 14 2008, at 07:05 AM Eastern Daylight Time
Start-End Page: 14125 - 14151
Page Count: 27
Comment Start Date: March 14 2008, at 12:00 AM Eastern Standard Time
Comment Due Date: April 14 2008, at 11:59 PM Eastern Standard Time

Comments

    View All
Total: 12
Comment submitted by Michel Weiss, Fleet Readiness Center Southeast (FRC-SE), Navy Department
Posted: 04/08/2008     ID: EPA-HQ-OAR-2005-0084-0046

Apr 14,2008 11:59 PM ET
Comment submitted by Wisconsin Department of Commerce on behalf of Dan Nickey, Chair, National Steering Committee, Small Business Environmental Assistance and Small Business Ombundsman Programs (SBEAP/SBO)
Posted:     ID: EPA-HQ-OAR-2005-0084-0047

Apr 14,2008 11:59 PM ET
Comment submitted by Eric Howland, Manager Environmental Affairs and Utilities, Thomas Steel Strip Corporation (TSS)
Posted: 04/14/2008     ID: EPA-HQ-OAR-2005-0084-0048

Apr 14,2008 11:59 PM ET
Comment submitted by Sahar Osman-Sypher, Project Manager, Environmental, Health & Safety, IPC-Association Connecting Electronics Industries (IPC)
Posted: 04/15/2008     ID: EPA-HQ-OAR-2005-0084-0049

Apr 14,2008 11:59 PM ET
Comment submitted by Donald R. Schregardus, Deputy Assistant Secretary of the Navy (Environment), Department of Defense Clean Air Act Services Steering Committee, (Installations and Environment), Office of the Assistant Secretary, Department of the Navy
Posted: 04/15/2008     ID: EPA-HQ-OAR-2005-0084-0050

Apr 14,2008 11:59 PM ET

Related Documents

    More
Total: 132
Revision of Source Category List for Standards Under Section 112(k) of the Clean Air Act; and National Emission Standards for Hazardous Air Pollutants for Area Sources: Ferroalloys Production Facilities
National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins (Polysulfide Rubber Production, Ethylene Propylene Rubber Production, Butyl Rubber Production, Neoprene Production); National Emission Standards for Hazardous Air Pollutants for Epoxy Resins Production and Non-Nylon Polyamides Production; National Emission Standards for Hazardous Air Pollutants for Sourc
National Emission Standards for Halogenated Solvent Cleaning
Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources: Electric Arc Furnace Steelmaking Facilities; Proposed Rule
Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources: ElectricArc Furnace Steelmaking Facilities; Direct Final Rule