eLaws | eCases | United States Code | Federal Courts |

National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Nine Metal Fabrication and Finishing Source Categories

Document ID: EPA-HQ-OAR-2006-0306-0002
Document Type: Proposed Rule
Agency: Environmental Protection Agency
Topics: No Topics associated with this document
Federal Register Number: E8-06411
CFR Citation: 40 CFR 63
View Document:

Details Information

Abstract:	Federal Register of April 3, 2008, (73 FR 18334) (FRL-8547-2)
Document Subtype:	Federal Register Document
Received Date:	April 03 2008, at 06:32 AM Eastern Daylight Time
Start-End Page:	18333 - 18381
Page Count:	49
Comment Start Date:	April 3 2008, at 12:00 AM Eastern Standard Time
Comment Due Date:	May 5 2008, at 11:59 PM Eastern Standard Time

Comments

View All

Total: 24

Anonymous Public Comment
Posted: 04/11/2008 ID: EPA-HQ-OAR-2006-0306-0042

Comment Period Closed
May 05,2008 11:59 PM ET

Anonymous public comment
Posted: 04/18/2008 ID: EPA-HQ-OAR-2006-0306-0043

Comment Period Closed
May 05,2008 11:59 PM ET

Comment submitted by Paul J. Mellons, President, Novetas Solutions LLC
Posted: 04/25/2008 ID: EPA-HQ-OAR-2006-0306-0044

Comment Period Closed
May 05,2008 11:59 PM ET

Comment submitted by Shelley Kaderly, Air Quality Division Administrator, Nebraska Department of Environmental Quality (NDEQ)
Posted: 05/02/2008 ID: EPA-HQ-OAR-2006-0306-0046

Comment Period Closed
May 05,2008 11:59 PM ET

Comment submitted by Renee Lesjak Bashel, Small Business Clean Air Assistance Program, Wisconsin Department of Commerce on behalf of Dan Nickey, Chair, National Steering Committee for Small Business Environmental Assistance and Small Business Ombudsman Programs (SBEAP/SBOs)
Posted: 05/05/2008 ID: EPA-HQ-OAR-2006-0306-0048

Comment Period Closed
May 05,2008 11:59 PM ET

Related Documents

More

Total: 132

Revision of Source Category List for Standards Under Section 112(k) of the Clean Air Act; and National Emission Standards for Hazardous Air Pollutants for Area Sources: Ferroalloys Production Facilities

National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins (Polysulfide Rubber Production, Ethylene Propylene Rubber Production, Butyl Rubber Production, Neoprene Production); National Emission Standards for Hazardous Air Pollutants for Epoxy Resins Production and Non-Nylon Polyamides Production; National Emission Standards for Hazardous Air Pollutants for Sourc

National Emission Standards for Halogenated Solvent Cleaning

Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources: Electric Arc Furnace Steelmaking Facilities; Proposed Rule

Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources: ElectricArc Furnace Steelmaking Facilities; Direct Final Rule