Title:
ATSDR Draft Toxicological Profile for Chromium

Abstract:
September 2008 draft for public comment prepared byDivision of Toxicology and Environmental Medicine/Applied Toxicology Branch, Agency for Toxic Substances and Disease Registry (ATSDR), Public Health Service (PHS), U.S. Department of Health and Human Services (DHHS)

Title:
James Abbott ECHO Report

Abstract:
Enforcement & Compliance History Online (ECHO) report generated by the Integrated Data for Enforcement Analysis (IDEA) system, USEPA

Title:
NCMS Future of Finishing 1.1.2008

Title:
NMFRC 2003 EPA Comparison ask the experts

Abstract:
National Metal Finishing Resource Center Ask the Expert Question-and-Answer Archive (Hard Chrome Plating) June 2003 by Larry Zitko, ChromeTech, Inc.

Title:
NRDC 2012 Strengthening Toxic Risk Assessments to Protect Human Health

Abstract:
Issue Paper February 2012 This document can be viewed at the USEPA Docket Center, Public Reading Room. Address: USEPA West, 1301 Constitution Ave. NW, Room 3334, Washington, DC 20004. Telephone: 202-566-1744; Email: docket-customerservice@epa.gov

Title:
NRDC comments on IRIS CrVI draft Nov 2010

Abstract:
11.24.2010 External Review Draft: Natural Resources Defense Council (NRDC) comments on the USEPA 2010 IRIS Toxicological Review of Hexavalent Chromium (CRVI)

Title:
Oct 2011 CARB Compliance Report

Abstract:
Summary of Compliance with the Airborne Toxic Control Measure for Chromium Plating and Chromic Acid Anodizing Facilities in Four California Air Districts prepared by California Air Resources Board (CARB).

Title:
OEHHA July 2010 PFOS and its salts

Abstract:
Perfluorooctane sulfonate (PFOS) and Its Salts and Transformation and Degradation Precursors prepared by Office of Environmental Health Hazard Assessment (OEHHA)

Title:
Proof is in the Permit - Citizens Manual Part I

Abstract:
The Proof is in the Permit, How to Make Sure a Facility in Your Community Gets an Effective Title V Air Pollution Permit June 19, 2000. This document can be viewed at the USEPA Docket Center, Public Reading Room. Address: USEPA West, 1301 Constitution Ave. NW, Room 3334, Washington, DC 20004. Telephone: 202-566-1744; Email: docket-customerservice@epa.gov

Title:
SAB May 2010 EPA-SAB-10-007 Review

Abstract:
5.7.2010 [EPA-SAB-10-007] Cover Letter from Dr. Deborah L. Swackhamer, Chair, Science Advisory Board (SAB), USEPA and Dr. Jana Milford, Chair, Science Advisory Board (SAB) Risk and Technology Review (RTR) Methods Review Panel to Lisa P. Jackson, Administrator, USEPA for the Review of EPA’s draft entitled Risk and Technology Review (RTR) Risk Assessment Methodologies: For Review by the EPA’s Science Advisory Board with Case Studies – MACT I Petroleum Refining Sources and Portland Cement Manufacturing

Title:
SCAQMD Draft Staff Report November 2008

Abstract:
South Coast Air Quality Management District (SCAQMD) Draft Staff Report: Proposed Amended Rule 1469- Hexavalent Chromium Emissions from Chromium Electroplating and Chromic Acid Anodizing Operations prepared by Eugene Kang et al. for South Coast Air Quality Management District (SCAQMD)

Title:
SCAQMD Rule 1469 Hex Chrome Emissions

Abstract:
South Coast Air Quality Management District (SCAQMD) Rule 1469: Hexavalent Chromium Emissions from Chromium Electroplating and Chromic Acid Anodizing Operations. Adopted October 9, 1998. Amended May 2, 2003. Amended December 5, 2008

Title:
Summary of Other HAP Emissions in CA Source Inventory for Chrome Plating

Title:
Wade Technology ECHO Report

Abstract:
Enforcement & Compliance History Online (ECHO) report generated by the Integrated Data for Enforcement Analysis (IDEA) system, USEPA