U.S. DOT/NHTSA - Final Rule

Document ID: NHTSA-1998-3390-0028
Document Type: Rule
Agency: National Highway Traffic Safety Administration
Topics: No Topics associated with this document
CFR Citation: 49 CFR 571
View Document:  View as format tiff View as format pdf

Details Information

Abstract: This final rule establishes a new Federal motor vehicle safety standard that requires motor vehicle manufacturers to provide motorists with a new way of installing child restraints. In the future, vehicles will be equipped with child restraint anchorage systems that are standarized and independent of the vehicle seat belts. The new independent system will have two lower anchorages, and one upper anchorage. Each lower anchorage will include a rigid round rod or "bar" unto which a hook, a jaw-like buckle or other connector can be snapped. The bars will be located at the intersection of the vehicle seat cushion and seat back. The upper anchorage will be a ring-like object to which the upper tether of a child restraint system can be attached. The new independent anchorage system will be required to be installed at two rear seating positions. In addition, a tether anchorage will be required at a third position. This final rule also amends the child restraint standard to require child restraints to be equipped with means for attaching to the new independent anchorage system. This final rule is being issued because the full effectiveness of child restraint systems is not being realized. The reasons for this include design features affecting the compatibility of child restraints and both vehicle seats and vehicle seat belt systems. By requiring an easy-to-use anchorage system that is independent of the vehicle seat belts, this final rule makes possible more effective child restraint installation and will thereby increase child restraint effectiveness and child safety. The admendments made in this rule are effective September 1, 1999. The incoporation by reference of the material listed in this document is approved by the Director of the Federal Register as of September 1, 1999. Petitions for reconsideration of the rule must be received by April 19, 1999.
Document Subtype: Federal Register Publication
Received Date: March 05 1999, at 12:00 AM Eastern Standard Time
Page Count: 65
Comment Due Date: May 21 1997, at 11:59 PM Eastern Standard Time

Comments

    View All
Total: 12
EvenFlo Company Inc. - Comment(s)
Posted: 07/23/1998     ID: NHTSA-1998-3390-0003

May 21,1997 11:59 PM ET
Cosco, Inc. - Comment(s)
Posted: 07/16/1998     ID: NHTSA-1998-3390-0018

May 21,1997 11:59 PM ET
Volvo Cars of North America, Inc. - Comment(s)
Posted: 07/16/1998     ID: NHTSA-1998-3390-0019

May 21,1997 11:59 PM ET
Volvo -- Volvo Cars of North America, Inc. - Comments
Posted: 07/24/1998     ID: NHTSA-1998-3390-0020

May 21,1997 11:59 PM ET

May 21,1997 11:59 PM ET

Related Documents

    More
Total: 140
Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment; Denial of Petition for Rulemaking
Federal Motor Vehicle Safety Standards; Motor Vehicle Brake Fluids
Conaway Hip-Hugger; Denial of Petition for Rulemaking
Federal Motor Vehicle Safety Standards: Tires; Correction, Occupant Crash Protection; Correction
Federal Motor Vehicle Safety Standards: Tires; Correction, Occupant Crash Protection; Correction