U.S. DOT/NHTSA - Final Rule; Technical Amendment

Document ID: NHTSA-1999-6185-0001
Document Type: Rule
Agency: National Highway Traffic Safety Administration
Topics: No Topics associated with this document
CFR Citation: 49 CFR 571
View Document:  View as format tiff View as format pdf

Details Information

Abstract: On March 10, 1995, we published in the Federal Register (60 FR 13297) a final rule establishing stopping distance requirements for hydraulically-braked vehicles with gross vehicle weight ratings (GVWR) greater than 10,000 pounds. The requirements specified the distances in which different types of medium and heavy vehicles must come to a stop from 60 mph. There was an error in that rule with regard to Table II--Stopping Distances, which contains the applicable stopping distance requirements. The superscripts in the table identifying specifications for school buses were misplaced. This rule amends the hydraulic brake standard to correct the location of the superscripts in Table II. Dates: The correcting amendments to Table II are effective October 7, 1999.
Document Subtype: Final Rule
Received Date: September 07 1999, at 12:00 AM Eastern Daylight Time
Page Count: 3
Comment Due Date: September 7 1999, at 11:59 PM Eastern Standard Time

Comments

Total: 0
No comments posted.

Related Documents

    More
Total: 140
Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment; Denial of Petition for Rulemaking
Federal Motor Vehicle Safety Standards; Motor Vehicle Brake Fluids
Conaway Hip-Hugger; Denial of Petition for Rulemaking
Federal Motor Vehicle Safety Standards: Tires; Correction, Occupant Crash Protection; Correction
Federal Motor Vehicle Safety Standards: Tires; Correction, Occupant Crash Protection; Correction