Code of Federal Regulations (Last Updated: July 5, 2024) |
Title 10 - Energy |
Chapter III - Department of Energy |
Part 830 - Nuclear Safety Management |
Subpart B - Safety Basis Requirements |
§ 830.202 - Safety basis.
-
§ 830.202 Safety basis.
(a) The contractor responsible for a hazard category Hazard Category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis for the facility.
(b) In establishing the safety basis for a hazard category Hazard Category 1, 2, or 3 DOE nuclear facility, the contractor responsible for the facility must:
(1) Define the scope of the work to be performed;
(2) Identify and analyze the hazards associated with the work;
(3) Categorize the facility consistent with DOE-STD-1027-92 (“Hazard Categorization and Accident Analysis Techniques for compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports,” Change Notice 1, September 1997);
(4) Prepare a documented safety analysis for the facility; and
(5) Establish the hazard controls upon which the contractor will rely to ensure adequate protection of workers, the public, and the environment.
(c) In maintaining the safety basis for a hazard category Hazard Category 1, 2, or 3 DOE nuclear facility, the contractor responsible for the facility must:
(1) Update the safety basis to keep it current and to reflect changes in the facility, the work and the hazards as they are analyzed in the documented safety analysis;
(2) Annually submit to provide DOE either the updated current documented safety analysis for approval or a letter stating that there have been no changes in the documented safety analysis since the prior submissionsubmittal; and
(3) Incorporate in the safety basis any changes, conditions, or hazard controls directed by DOE.