§ 25.211 - Analog video transmissions in the FSS.  


Latest version.
  • § 25.211 Analog video transmissions in the FSS.

    (a) [Reserved]

    (b) All conventional C-band analog video transmissions must contain an energy dispersal signal at all times with a minimum peak-to-peak bandwidth set at whatever value is necessary to meet the power flux density limits specified in § 25.208(a) and successfully coordinated internationally and accepted by adjacent U.S. satellite operators based on the use of state of the art space and earth station facilities. All transmissions in frequency bands described in § 25.208(b) and (c) must also contain an energy dispersal signal at all times with a minimum peak-to-peak bandwidth set at whatever value is necessary to meet the power flux density limits specified in § 25.208(b) and (c) and successfully coordinated internationally and accepted by adjacent U.S. satellite operators based on the use of state of the art space and earth station facilities.

    (c) All initial analog video transmissions shall be preceded by a video test transmission at an uplink e.i.r.p. at least 10 dB below the normal operating level. The earth station operator shall not increase power until receiving notification from the satellite network control center that the frequency and polarization alignment are satisfactory pursuant to the procedures specified in § 25.272. The stationary earth station operator that has successfully transmitted an initial video test signal to a satellite pursuant to this paragraph is not required to make subsequent video test transmissions if subsequent transmissions are conducted using exactly the same parameters as the initial transmission.

    (d) An earth station may be routinely licensed for transmission of full-transponder analog video services in the 5925-6425 MHz band or 14.0-14.5 GHz band provided:

    (1) The application includes certification, pursuant to § 25.132(a)(1), of conformance with the antenna performance standards in § 25.209(a) and (b);

    (2) For transmission in the 5925-6425 MHz band, the input power into the antenna will not exceed 26.5 dBW; or

    (3) For transmission in the 14.0-14.5 GHz band, the input power into the antenna will not exceed 27 dBW.

    (e) Applications for authority for analog video uplink transmission in the 5925-6425 MHz or 14.0-14.5 GHz bands that are not eligible for routine processing under paragraph (d) of this section are subject to the requirements of § 25.220.

    [58 FR 13421, Mar. 11, 1993, as amended at 61 FR 9952, Mar. 12, 1996; 62 FR 5931, Feb. 10, 1997; 70 FR 32256, June 2, 2005; 78 FR 8428, Feb. 6, 2013; 79 FR 8323, Feb. 12, 2014; 81 FR 55338, Aug. 18, 2016]