§ 107.155 - Means of compliance.

§ 107.155 Means of compliance.

(a) Establishment of compliance. To meet the requirements of § 107.120(a) for operations in Category 2, or the requirements of § 107.130(a) for operations in Category 3, the means of compliance must consist of test, analysis, or inspection.

(b) Required information. An applicant requesting FAA acceptance of a means of compliance must submit the following information to the FAA in a manner specified by the Administrator:

(1) Procedures. Detailed description of the means of compliance, including applicable test, analysis, or inspection procedures to demonstrate how the small unmanned aircraft meets the requirements of § 107.120(a) for operations in Category 2 or the requirements of § 107.130(a) for operations in Category 3. The description should include conditions, environments, and methods, as applicable.

(2) Compliance explanation. Explanation of how application of the means of compliance fulfills the requirements of § 107.120(a) for operations in Category 2 or the requirements of § 107.130(a) for operations in Category 3.

(c) FAA acceptance. If the FAA determines the applicant has demonstrated compliance with paragraphs (a) and (b) of this section, it will notify the applicant that it has accepted the means of compliance.

(d) Rescission.

(1) A means of compliance is subject to ongoing review by the Administrator. The Administrator may rescind its acceptance of a means of compliance if the Administrator determines that a means of compliance does not meet any or all of the requirements of this subpart.

(2) The Administrator will publish a notice of rescission in the Federal Register.

(e) Inapplicability of part 13, subpart D, of this chapter. Part 13, subpart D, of this chapter does not apply to the procedures of paragraph (a) of this section.