![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 33 - Navigation and Navigable Waters |
![]() |
Chapter I - Coast Guard, Department of Homeland Security |
![]() |
SubChapter O - Pollution |
![]() |
Part 154 - Facilities Transferring Oil or Hazardous Material in Bulk |
![]() |
Subpart P - Marine Vapor Control Systems |
![]() |
Transfer Facilities - VCS Design and Installation |
§ 154.2106 - Detonation arresters installation.
Latest version.
-
§ 154.2106 Detonation arresters installation.
This section applies only to facilities collecting vapors of flammable, combustible, or non-high flash point liquid cargoes.
(a) Detonation arresters must be installed in accordance with the guidelines outlined in the arrester manufacturer's acceptance letter provided by the Coast Guard.
(b) On either side of a detonation arrester, line size expansions must be in a straight pipe run and must be no closer than 120 times the pipe's diameter from the detonation arrester unless the manufacturer has test data to show the expansion can be closer.