Code of Federal Regulations (Last Updated: October 10, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter N - Effluent Guidelines and Standards |
Part 428 - Rubber Manufacturing Point Source Category |
Subpart K - Latex Foam Subcategory |
§ 428.113 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
Latest version.
-
§ 428.113 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
Effluent characteristic Effluent limitations Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed - Metric units (kg/kkg of raw material) Zinc 0.058 0.024 BOD5 2.4 1.4 TSS 2.26 0.94 pH (1) (1) English units (lb/1,000 lb of raw material) Zinc 0.058 0.024 BOD5 2.4 1.4 TSS 2.26 0.94 pH (1) (1)