§ 1450.3 - Incorporation by reference.

§ 1450.3 Incorporation by reference.

Cross Reference

Link to an amendment published at 84 FR 24027, May 24, 2019.

Cross Reference

This amendment delayed until May 24, 2021 at 85 FR 58267, Sept. 18, 2020.

(a) Each (a) Except as provided in paragraph (b) of this section, each swimming pool or spa drain cover manufactured, distributed, or entered into commerce in the United States shall conform to the entrapment protection standards of ANSI/APSP/ICC-16 20112017, Suction Fittings American National Standard for Suction Outlet Fitting Assemblies (SOFA) for Use in Swimming Pools, Wading Pools, Spas , and Hot Tubs, approved on February 17August 18, 20112017. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from the Pool & Hot Tub Alliance (formerly known as the Association of Pool & Spa Professionals), 2111 Eisenhower Avenue, Alexandria, Virginia 22314; http://www.apsp.org, telephone [phone]. You may inspect a copy at the Office Division of the SecretarySecretariat, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone [phone], or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to https:http://www.archives.gov/federal_register/code_of_federal_regulations-regster/cfr/ibr_-locations.html.

(b) [Reserved]

[76 FR 47438, July 5, 2011

The CPSC standard does not require compliance with the following provisions:

(1) Section 1.1.3 of ANSI/APSP/ICC-16 2017.

(2) Sections 1.3.3.1 through 1.3.3.2 of ANSP/APSP/ICC-16 2017.

(3) Section 3.2.4 of ANSI/APSP/ICC-16 2017.

(4) Section 3.5.1 of ANSI/APSP/ICC-16 2017.

(5) Sections 3.6.1 through 3.6.4.3 of ANSI/APSP/ICC-16 2017.

(6) Section 3.7 of ANSI/APSP/ICC-16 2017.

(7) Section 9.4 of ANSI/APSP/ICC-16 2017.

[84 FR 24027, May 24, 2019]