Code of Federal Regulations (Last Updated: April 5, 2024) |
Title 24 - Housing and Urban Development |
Subtitle A - Office of the Secretary, Department of Housing and Urban Development |
Part 35 - Lead-Based Paint Poisoning Prevention in Certain Residential Structures |
Subpart R - Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities |
§ 35.1325 - Abatement.
Latest version.
-
§ 35.1325 Abatement.
Abatement shall be performed in accordance with methods and standards established either by a State or Indian tribe under a program authorized by EPA, or by EPA at 40 CFR 745.227(e), and shall be completed by achieving clearance in accordance with § 35.1340. If encapsulation or enclosure is used as a method of abatement, ongoing lead-based paint maintenance activities shall be performed as required by the applicable subpart of this part in accordance with § 35.1355. Abatement of an intact, factory-applied prime coating on metal surfaces is not required unless the surface is a friction surface.