Table 10 to Subpart IIIII of Part 63 - Applicability of General Provisions to Subpart IIIII

Table 10 to Subpart IIIII of Part 63 - Applicability of General Provisions to Subpart IIIII

As stated in § 63.8262, you must comply with the applicable General Provisions requirements according to the following table:

Citation	Subject	Applies to subpart IIIII	Explanation
§ 63.1	Applicability	Yes
§ 63.2	Definitions	Yes
§ 63.3	Units and Abbreviations	Yes
§ 63.4	Prohibited Activities	Yes
§ 63.5	Construction/Reconstruction	Yes
§ 63.6(a)-(g), (i), (j), except for (e)(1)(i) and (ii), (e)(3), and (f)(1)	Compliance with Standards and Maintenance Requirements	Yes
§ 63.6(e)(1)(i) and (ii), (e)(3), and (f)(1)	SSM Requirements	Yes	Only applies until the date specified in § 63.8186(a)(3).
§ 63.6(h)	Compliance with Opacity and Visible Emission Standards	No	Subpart IIIII does not have opacity and visible emission standards.
§ 63.7(a)-(h), except for (a)(2) and (e)(1)	Performance Testing Requirements	Yes	Subpart IIIII specifies additional requirements related to site-specific test plans and the conduct of performance tests.
§ 63.7(a)(2)	Applicability and Performance Test Dates	No	Subpart IIIII requires the performance test to be performed on the compliance date.
§ 63.7(e)(1)	Performance Test Conditions	No	See § 63.8232(a).
§ 63.8(a)(1), (a)(3); (b); (c)(1)(ii), (2)-(4), (6)-(8); (d)(1)-(2); (e); and (f)(1)-(5)	Monitoring Requirements	Yes	Only applies for CEMS, except Subpart IIIII specifies how and when the performance evaluation results are reported.
§ 63.8(a)(2)	Continuous Monitoring System (CMS) Requirements	No	Subpart IIIII requires a site-specific monitoring plan in lieu of a promulgated performance specification for a mercury concentration CMS.
§ 63.8(a)(4)	Additional Monitoring Requirements for Control Devices in § 63.11	No	Subpart IIIII does not require flares.
§ 63.8(c)(1)(i) and (iii)	CMS Operation and SSM Plan	Yes	Only applies until the date specified in § 63.8186(a)(3).
§ 63.8(c)(5)	COMS Minimum Procedures	No	Subpart IIIII does not have opacity and visible emission standards.
§ 63.8(d)(3)	Written Procedures for CMS	No	See § 63.8242(a)(3)(v).
§ 63.8(f)(6)	Alternative to Relative Accuracy Test	No	Subpart IIIII does not require CEMS.
§ 63.8(g)	Data Reduction	No	Subpart IIIII specifies mercury concentration CMS data reduction requirements.
§ 63.9(a)-(e), (g)-(j)	Notification Requirements	Yes
§ 63.9(f)	Notification of VE/Opacity Test	No	Subpart IIIII does not have opacity and visible emission standards.
§ 63.9(k)	Electronic reporting procedures	Yes	Only as specified in § 63.9(j).
§ 63.10(a); (b)(1); (b)(2)(vi)-(xii), (xiv); (b)(3); (c)(1)-(14); (d)(1), (4); (e); (f)	Recordkeeping/Reporting	Yes
§ 63.10(b)(2)(i)-(v)	Recordkeeping/Reporting Associated with Startup, Shutdown, and Malfunctions	Yes	Only applies until the date specified in § 63.8186(a)(3).
§ 63.10(b)(2)(xiii)	CMS Records for RATA Alternative	No	Subpart IIIII does not require CEMS.
§ 63.10(c)(15)	Use of SSM Plan	Yes	Only applies until the date specified in § 63.8186(a)(3).
§ 63.10(d)(2)	Performance Test Results	No	This subpart at 63.8232(g) specifies how and when the performance test results are reported electronically.
§ 63.10(d)(3)	Reporting Opacity or VE Observations	No	Subpart IIIII does not have opacity and visible emission standards.
§ 63.10(d)(5)	Startup, Shutdown, and Malfunction Reports	No
§ 63.10(e)(2)(i)	CEM Reporting	Yes	Except this subpart specifies how and when the performance evaluation results are reported.
§ 63.11	Flares	No	Subpart IIIII does not require flares.
§ 63.12	Delegation	Yes
§ 63.13	Addresses	Yes
§ 63.14	Incorporation by Reference	Yes
§ 63.15	Availability of Information	Yes

[87 FR 27024, May 6, 2022]