Code of Federal Regulations (Last Updated: July 5, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter N - Effluent Guidelines and Standards |
Part 414 - Organic Chemicals, Plastics, and Synthetic Fibers |
Subpart J - Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment |
§ 414.101 - Toxic pollutant effluent limitations and standards for direct discharge point sources that do not use end-of-pipe biological treatment.
-
§ 414.101 Toxic pollutant effluent limitations and standards for direct discharge point sources that do not use end-of-pipe biological treatment.
(a) Any point source subject to this subpart must achieve discharges not exceeding the quantity (mass) determined by multiplying the process wastewater flow subject to this subpart times the concentartions in the following table.
(b) In the case of chromium, copper, lead, nickel, zinc, and total cyanide, the discharge quantity (mass) shall be determined by multiplying the concentrations listed in the following table for these pollutants times the flow from metal bearing waste streams for the metals and times the cyanide-bearing waste streams for total cyanide. The metal-bearing waste streams and cyanide-bearing waste streams are defined as those waste streams listed in Appendix appendix A of this part, plus any additional OCPSF process wastewater streams identified by the permitting authority on a case-by-case basis as metal or cyanide bearing based upon a determination that such streams contain significant amounts of the pollutants identified above. Any such streams designated as metal or cyanide bearing must be treated independently of other metal or cyanide bearing waste streams unless the permitting authority determines that the combination of such streams, prior to treatment, with the Appendix A waste streams will result in substantial reduction of these pollutants. This determination must be based upon a review of relevant engineering, production, and sampling and analysis information.
Effluent characteristics BAT effluent limitations and NSPS1 Maximum for any one day Maximum for monthly average Acenaphthene 47 19 Acenaphthylene 47 19 Acrylonitrile 232 94 Anthracene 47 19 Benzene 134 57 Benzo(a)anthracene 47 19 3,4-Benzofluoranthene 48 20 Benzo(k)fluoranthene 47 19 Benzo(a)pyrene 48 20 Bis(2-ethylhexyl) phthalate 258 95 Carbon Tetrachloride 380 142 Chlorobenzene 380 142 Chloroethane 295 110 Chloroform 325 111 Chrysene 47 19 Di-n-butyl phthalate 43 20 1,2-Dichlorobenzene 794 196 1,3-Dichlorobenzene 380 142 1,4-Dichlorobenzene 380 142 1,1-Dichloroethane 59 22 1,2-Dichloroethane 574 180 1,1-Dichloroethylene 60 22 1,2-trans-Dichloroethylene 66 25 1,2-Dichloropropane 794 196 1,3-Dichloropropylene 794 196 Diethyl phthalate 113 46 2,4-Dimethylphenol 47 19 Dimethyl phthalate 47 19 4,6-Dinitro-o-cresol 277 78 2,4-Dinitrophenol 4,291 1,207 Ethylbenzene 380 142 Fluoranthene 54 22 Fluorene 47 19 Hexachlorobenzene 794 196 Hexachlorobutadiene 380 142 Hexachloroethane 794 196 Methyl Chloride 295 110 Methylene Chloride 170 36 Naphthalene 47 19 Nitrobenzene 6,402 2,237 2-Nitrophenol 231 65 4-Nitrophenol 576 162 Phenanthrene 47 19 Phenol 47 19 Pyrene 48 20 Tetrachloroethylene 164 52 Toluene 74 28 Total Chromium 2,770 1,110 Total Copper 3,380 1,450 Total Cyanide 1,200 420 Total Lead 690 320 Total Nickel 3,980 1,690 Total Zinc2 2,610 1,050 1,2,4-Trichlorobenzene 794 196 1,1,1-Trichloroethane 59 22 1,1,2-Trichloroethane 127 32 Trichloroethylene 69 26 Vinyl Chloride 172 97 [52 FR 42568, Nov. 5, 1987, as amended at 58 FR 36893, July 9, 1993]