![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 40 - Protection of Environment |
![]() |
Chapter I - Environmental Protection Agency |
![]() |
SubChapter C - Air Programs |
![]() |
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
![]() |
Subpart VVVV - National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing |
![]() |
Demonstrating Compliance for Open Molding Operations Controlled by Add-on Control Devices |
§ 63.5716 - When must I conduct a performance test?
Latest version.
-
§ 63.5716 When must I conduct a performance test?
(a) If your source is an existing source, you must complete the add-on control device performance test no later than the compliance date specified in § 63.5695.
(b) If your source is a new source, you must complete the add-on control device performance test no later than 180 days after the compliance date specified in § 63.5695.
(c) You must conduct a performance test every 5 years as part of renewing your 40 CFR part 70 or 71 operating permit.