![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 46 - Shipping |
![]() |
Chapter I - Coast Guard, Department of Homeland Security |
![]() |
SubChapter J - Electrical Engineering |
![]() |
Part 111 - Electric Systems - General Requirements |
![]() |
Subpart 111.105 - Hazardous Locations |
§ 111.105-40 - Additional requirements for RO/RO vessels.
-
§ 111.105-40 Additional requirements for RO/RO vessels.
(a) Each RO/RO vessel must meet ABS Steel Marine Vessel Rules (incorporated by reference; see 46 CFR 110.10–110–1), section 4–8–4/27.3.2.
(b) Each item of installed electrical equipment must meet the requirements for a Class I, Division 1; Class I, Division 2; Zone 0; Zone 1; or Zone 2 hazardous location when installed 460 mm (18 inches) or more above the deck of closed cargo spaces. Electrical equipment installed within 460 mm (18 inches) of the deck must be suitable for either a Class I, Division 1; Zone 0; or Zone 1 hazardous location.
(c) Where the ventilation requirement of ABS Steel Marine Vessel Rules section 4–8–4/27.3.2 is not met—
(1) All installed electrical equipment must be suitable for a Class I, Division 1; Zone 0; or Zone 1 hazardous location; or
(2) If fitted with an approved fixed gas detection system (set at 25 percent of the LEL), each item of installed electrical equipment must meet the requirements for either a Class I, Division 1; Class I, Division 2; Zone 0; Zone 1; or Zone 2 hazardous location.
[CGD 94–108, 61 FR 28285, June 4, 1996; 61 FR 33045, June 26, 1996, as amended at 62 FR 23909, May 1, 1997; USCG–2003–16630, 73 FR 65200, Oct. 31, 2008; USCG–2020–0075, 88 FR 16367, Mar. 16, 2023]