§ 52.01-2 - Adoption of Section I of the ASME BPVC.

§ 52.01-2 Adoption of section Section I of the ASME Boiler and Pressure Vessel CodeBPVC.

(a) Main power boilers and auxiliary boilers shall must be designed, constructed, inspected, tested, and stamped in accordance with section Section I of the ASME Boiler and Pressure Vessel Code BPVC (incorporated by reference; see 46 CFR § 52.01-1), as limited, modified, or replaced by specific requirements in this part. The provisions in the appendix to section appendices to Section I of the ASME Boiler and Pressure Vessel Code BPVC are adopted and shall must be followed when the requirements in section Section I make them mandatory. For general information, table 1 to § 52.01-12(a) lists the various paragraphs in section Section I of the ASME Boiler and Pressure Vessel Code BPVC that are limited, modified, or replaced by regulations in this part.

Table 1 to § 52.01-12(a)—Limitations and Modifications in the Adoption of Section I of the ASME CodeBPVC

Paragraphs in section I, ASME Code1 BPVC and disposition	Unit of this part
PG-1 replaced by	54.01-5(a)	PG-5 through PG-13 modified by	52.01-90
PG-16 through PG-31 modified by	52.01-95.
PG-32 through PG-39 modified by	52.01-100.
PG-42 through PG-55 modified by	52.01-100.
PG-58 and PG-59 modified by	52.01-105.
PG-60 modified by	52.01-110.
PG-61 modified by	52.01-115 (56.50-30).
PG-67 through PG-73 modified by	52.01-120.
PG-90 through PG-100 modified by	52.01-135 (52.01-95).
PG-91 modified by	52.01-135(b).
PG-99 modified by	52.01-135(c).
PG-100 modified by	52.01-95(e).
PG-104 through PG-113 modified by	52.01-140(a).
PG-112 and PG-113 modified by	52.01-145.
PW-1 through PW-54 modified by	52.05-1.
PW-10 modified by	52.05-15.
PW-11.1 modified by	52.05-20.
PW-16 modified by	52.05-30.
PW-41 modified by	52.05-20, 52.05-45.
PWT-1 through PWT-15 modified by	52.15-1.
PWT-9 modified by	52.15-5.
PWT-9.2 replaced by	52.15-5(b)
PWT-11 modified by	52.15-5.
PWT-11.3 replaced by	52.15-5(b).
PFT-1 through PFT-49 modified by	52.20-1.
PFT-44 modified by	52.20-17.
PFT-46. modified by	52.20-25.
PFH-1 modified by	52.25-3.
PMB-1 through PMB-21 modified by	52.25-5.
PEB-1 through PEB-19 modified by	52.25-7.
PVG-1 through PVG-12 modified by	52.25-10.
A-19 through A-21 modified by	52.01-50.
Note 1 to table 1 to § 52.01-2(a): The references to specific provisions in the ASME Code BPVC are coded. The first letter “P” refers to section I, while the letter “A” refers to the appendix to section I. The letter or letters following “P” refer to a specific subsection of section I. The number following the letter or letters refers to the paragraph so numbered in the text.

(b) References to the ASME CodeBPVC, such as paragraph PG-1, indicate:

(1) P=Section I, Power Boilers

ASME Code

.

(2) G=Subsection—General Requirements.

(3) 1=Paragraph 1.

(c) When a section or paragraph of the regulations in this part relates to material in section Section I of the ASME CodeBPVC, the relationship with the code will be shown immediately following the heading of the section or at the beginning of the paragraph as follows:

(1) (Modifies P ______.) This indicates that the material in P __ ____ is generally applicable but is being altered, amplified, or augmented.

(2) (Replaces P ______.) This indicates that P __ ____ does not apply.

(3) (Reproduces P ______.) This indicates that P __ ____ is being identically reproduced for convenience, not for emphasis.

[CGFR 68-82, 33 FR 18815, Dec. 18, 1968, as amended by CGFR 69-127, 35 FR 9975, June 17, 1970; CGD 81-79, 50 FR 9431, Mar. 8, 1985. Redesignated and amended by CGD 88-032, 56 FR 35821, July 29, 1991; USCG-2003-16630, 73 FR 65160, Oct. 31, 2008]