 |
Code of Federal Regulations (Last Updated: October 10, 2024) |
 |
Title 46 - Shipping |
|
|
Chapter I - Coast Guard, Department of Homeland Security |
|
|
SubChapter F - Marine Engineering |
|
|
Part 57 - Welding and Brazing |
| Subpart 57.01 - Scope |
| § 57.01-1 - Qualifications and production tests. |
| Subpart 57.02 - General Requirements |
| § 57.02-1 - Incorporation by reference. |
| § 57.02-2 - Adoption of Section IX of the ASME BPVC. |
| § 57.02-3 - Performance qualifications issued by other agencies. |
| § 57.02-4 - Fabricator's responsibility. |
| § 57.02-5 - Filler metals. |
| Subpart 57.03 - Procedure Qualifications |
| § 57.03-1 - General requirements. |
| Subpart 57.04 - Procedure Qualification Range |
| § 57.04-1 - Test specimen requirements and definition of ranges (modifies QW 202, QW 210, QW 451, and QB 202). |
| Subpart 57.05 Performance Qualifications - Performance Qualifications |
| § 57.05-1 - General. |
| § 57.05-2 - Transfer of performance qualifications. |
| § 57.05-3 - Limited space qualifications. |
| § 57.05-4 - Welder qualification by procedure tests. |
| § 57.05-5 - Low temperature application. |
| Subpart 57.06 - Production Tests |
| § 57.06-1 - Production test plate requirements. |
| § 57.06-2 - Production test plate interval of testing. |
| § 57.06-3 - Method of performing production testing. |
| § 57.06-4 - Production testing specimen requirements. |
| § 57.06-5 - Production toughness testing. |