§ 80.211 - Emission limitations.  


Latest version.
  • § 80.211 Emission limitations.

    The emissions must be attenuated according to the following schedule.

    (a) The mean power when using emissions H3E, J3E and R3E:

    (1) On any frequency removed from the assigned frequency by more than 50 percent up to and including 150 percent of the authorized bandwidth:

    at least 25 dB for transmitters installed before February 1, 1992,

    at least 28 dB for transmitters installed on or after February 1, 1992;

    (2) On any frequency removed from the assigned frequency by more than 150 percent up to and including 250 percent of the authorized bandwidth: At least 35 dB; and

    (3) On any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth: At least 43 plus 10log10 (mean power in watts) dB.

    (b) For transmitters operating in the band 1626.5-1646.5 MHz. In any 4 kHz band the mean power of emissions shall be attenuated below the mean output power of the transmitter as follows:

    (1) Where the center frequency is removed from the assigned frequency by more than 50 percent up to and including 100 percent of the authorized bandwidth: At least 25 dB;

    (2) Where the center frequency is removed from the assigned frequency by more than 100 percent up to 250 percent of the authorized bandwidth: At least 35 dB; and

    (3) On any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth: At least 43 plus 10log10 (mean power in watts) dB.

    (c) In any 4 kHz band the peak power of spurious emissions and noise at the input to the transmit antenna must be attenuated below the peak output power of the station as follows:

    (1) 125 dB at 1525.0 MHz, increasing linearly to 90 dB at 1612.5 MHz;

    (2) 90 dB at 1612.5 MHz increasing linearly to 60 dB at 1624.0 MHz;

    (3) 90 dB from 1624.0 MHz to 1650.0 MHz, except at frequencies near the transmitted carrier where the requirements of paragraphs (b)(1) through (3) of this section, apply;

    (4) 60 dB at 1650.0 MHz decreasing linearly to 90 dB at 1662.5 MHz;

    (5) 90 dB at 1662.5 MHz decreasing linearly to 125 dB at 1752.5 MHz; and

    (6) 125 dB outside above range, except for harmonics which must comply with (b)(3) of this section.

    (d) The mean power of emissions from radiotelephone survival craft transmitters, 9 GHz search and rescue transponders, and radiotelegraph survival craft transmitters must be attenuated below the mean output power of the transmitter as follows:

    (1) On any frequency removed from the assigned frequency by more than 50 percent, up to and including 100 percent of the authorized bandwidth: at least 25 dB;

    (2) On any frequency removed from the assigned frequency by more than 100 percent of the authorized bandwidth: at least 30 dB.

    (e) The mean power of EPIRBs operating on 121.500 MHz, 243.000 MHz and 406.0-406.1 MHz must be as follows:

    (1) On any frequency removed from the assigned frequency by more than 50 percent, up to and including 100 percent of the authorized bandwidth: At least 25 dB;

    (2) On any frequency removed from the assigned frequency by more than 100 percent: at least 30 dB.

    (f) The mean power when using emissions other than those in paragraphs (a), (b), (c) and (d) of this section:

    (1) On any frequency removed from the assigned frequency by more than 50 percent up to and including 100 percent of the authorized bandwidth: At least 25 dB;

    (2) On any frequency removed from the assigned frequency by more than 100 percent up to and including 250 percent of the authorized bandwidth: At least 35 dB; and

    (3) On any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth: At least 43 plus 10log10 (mean power in watts) dB.

    [51 FR 31213, Sept. 2, 1986, as amended at 54 FR 40058, Sept. 29, 1989; 54 FR 49994, Dec. 4, 1989; 56 FR 11516, Mar. 19, 1991; 62 FR 40306, July 28, 1997; 73 FR 4482, Jan. 25, 2008; 78 FR 25175, Apr. 29, 2013]