Code of Federal Regulations (Last Updated: April 5, 2024) |
Title 49 - Transportation |
Subtitle B - Other Regulations Relating to Transportation |
Chapter I - Pipeline and Hazardous Materials Safety Administration, Department of Transportation |
Part 178 - Specifications for Packagings |
Subpart B - Specifications for Inside Containers, and Linings |
§ 178.33a-6 - Manufacture.
Latest version.
-
§ 178.33a-6 Manufacture.
(a) By appliances and methods that will assure uniformity of completed containers; dirt and scale to be removed as necessary; no defect acceptable that is likely to weaken the finished container appreciably; reasonably smooth and uniform surface finish required.
(b) Seams when used must be as follows:
(1) Circumferential seams. By welding, swedging, brazing, soldering, or double seaming.
(2) Side seams. By welding, brazing or soldering.
(c) Ends. The ends shall be of pressure design.
[Order 71, 31 FR 9074, July 1, 1966. Redesignated at 32 FR 5606, Apr. 5, 1967]