 |
Code of Federal Regulations (Last Updated: November 8, 2024) |
 |
Title 49 - Transportation |
|
|
Subtitle B - Other Regulations Relating to Transportation |
|
|
Chapter I - Pipeline and Hazardous Materials Safety Administration, Department of Transportation |
|
|
Part 178 - Specifications for Packagings |
|
|
Subpart J - Specifications for Containers for Motor Vehicle Transportation |
| § 178.318 - Specification MC 201; container for detonators and percussion caps. |
| § 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles. |
| § 178.337 - Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter. |
| § 178.338 - Specification MC-338; insulated cargo tank motor vehicle. |
| §§ 178.340--178.343 - [Reserved] |
| § 178.345 - General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles. |
| § 178.346 - Specification DOT 406; cargo tank motor vehicle. |
| § 178.347 - Specification DOT 407; cargo tank motor vehicle. |
| § 178.348 - Specification DOT 412; cargo tank motor vehicle. |
| § 178.345-1 - General requirements. |
| § 178.345-2 - Material and material thickness. |
| § 178.345-3 - Structural integrity. |
| § 178.345-4 - Joints. |
| § 178.345-5 - Manhole assemblies. |
| § 178.345-6 - Supports and anchoring. |
| § 178.345-7 - Circumferential reinforcements. |
| § 178.345-8 - Accident damage protection. |
| § 178.345-9 - Pumps, piping, hoses and connections. |
| § 178.345-10 - Pressure relief. |
| § 178.345-11 - Tank outlets. |
| § 178.345-12 - Gauging devices. |
| § 178.345-13 - Pressure and leakage tests. |
| § 178.345-14 - Marking. |
| § 178.345-15 - Certification. |
| § 178.346-1 - General requirements. |
| § 178.346-2 - Material and thickness of material. |
| § 178.346-3 - Pressure relief. |
| § 178.346-4 - Outlets. |
| § 178.346-5 - Pressure and leakage tests. |
| § 178.337-1 - General requirements. |
| § 178.347-1 - General requirements. |
| § 178.337-2 - Material. |
| § 178.347-2 - Material and thickness of material. |
| § 178.337-3 - Structural integrity. |
| § 178.347-3 - Manhole assemblies. |
| § 178.337-4 - Joints. |
| § 178.347-4 - Pressure relief. |
| § 178.337-5 - Bulkheads, baffles and ring stiffeners. |
| § 178.347-5 - Pressure and leakage test. |
| § 178.337-6 - Closure for manhole. |
| § 178.337-7 - Overturn protection. |
| § 178.337-8 - Openings, inlets, and outlets. |
| § 178.337-9 - Pressure relief devices, piping, valves, hoses, and fittings. |
| § 178.337-10 - Accident damage protection. |
| § 178.337-11 - Emergency discharge control. |
| § 178.337-12 - [Reserved] |
| § 178.337-13 - Supporting and anchoring. |
| § 178.337-14 - Gauging devices. |
| § 178.337-15 - Pumps and compressors. |
| § 178.337-16 - Testing. |
| § 178.337-17 - Marking. |
| § 178.337-18 - Certification. |
| § 178.318-1 - Scope. |
| § 178.338-1 - General requirements. |
| § 178.348-1 - General requirements. |
| § 178.318-2 - Container. |
| § 178.338-2 - Material. |
| § 178.348-2 - Material and thickness of material. |
| § 178.318-3 - Marking. |
| § 178.338-3 - Structural integrity. |
| § 178.348-3 - Pumps, piping, hoses and connections. |
| § 178.338-4 - Joints. |
| § 178.348-4 - Pressure relief. |
| § 178.338-5 - Stiffening rings. |
| § 178.348-5 - Pressure and leakage test. |
| § 178.338-6 - Manholes. |
| § 178.338-7 - Openings. |
| § 178.338-8 - Pressure relief devices, piping, valves, and fittings. |
| § 178.338-9 - Holding time. |
| § 178.338-10 - Accident damage protection. |
| § 178.338-11 - Discharge control devices. |
| § 178.338-12 - Shear section. |
| § 178.338-13 - Supporting and anchoring. |
| § 178.338-14 - Gauging devices. |
| § 178.338-15 - Cleanliness. |
| § 178.338-16 - Inspection and testing. |
| § 178.338-17 - Pumps and compressors. |
| § 178.338-18 - Marking. |
| § 178.338-19 - Certification. |