2014-30916. Airworthiness Directives; Airbus Airplanes

AGENCY:

Federal Aviation Administration (FAA), Department of Transportation (DOT).

ACTION:

Final rule.

SUMMARY:

We are adopting a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a determination that the maintenance actions for airplane systems susceptible to aging must be mandated. This AD requires revising the maintenance or inspection program to incorporate more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to mitigate the risks associated with aging effects of airplane systems. Such aging effects could change the characteristics leading to an increased potential for failure, which could result in failure of certain life-limited parts, and could reduce the structural integrity or reduce controllability of the airplane.

DATES:

This AD becomes effective February 25, 2015.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of February 25, 2015.

ADDRESSES:

You may examine the AD docket on the Internet at http://www.regulations.gov/​#!docketDetail;​D=​FAA-2014-0526;​; or in person at the Docket Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC.

For service information identified in this AD, contact Airbus, Airworthiness Office—EIAS, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone [phone]; fax [phone]; email [e-mail]; Internet http://www.airbus.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.

FOR FURTHER INFORMATION CONTACT:

Sanjay Ralhan, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone [phone]; fax [phone].

SUPPLEMENTARY INFORMATION:

Discussion

We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Airbus Model A318, A319, A320, and A321 series airplanes. The NPRM published in the Federal Register on August 12, 2014 (79 FR 47028). The NPRM was prompted by a determination that the maintenance actions for airplane systems susceptible to aging must be mandated. The NPRM proposed to require revising the maintenance or inspection program to incorporate more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to mitigate the risks associated with aging effects of airplane systems. Such aging effects could change the characteristics leading to an increased potential for failure, which could result in failure of certain life-limited parts, and could reduce the structural integrity or reduce controllability of the airplane.

The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued EASA Airworthiness Directive 2013-0146, dated July 16, 2013 (referred to after this as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition on all Airbus Model A318, A319, A320, and A321 series airplanes. The MCAI states:

The airworthiness limitations for Airbus aeroplanes are currently published in Airworthiness Limitations Section (ALS) documents.

The airworthiness limitations applicable to the Ageing Systems Maintenance (ASM) are given in Airbus A318/A319/A320/A320/A321 ALS Part 4, which is approved by [European Aviation Safety Agency] EASA.

Revision 01 of AIRBUS A318/A319/A320/A321 ALS Part 4 introduces more restrictive maintenance requirements and/or airworthiness limitations. Failure to comply with these instructions could result in an unsafe condition.

* * * * *

You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov/​#!documentDetail;​D=​FAA-2014-0526-0003.

Comments

We gave the public the opportunity to participate in developing this AD. We considered the comment received. United Airlines stated it has no comment on the NPRM (79 FR 47028, August 12, 2014).

Conclusion

We reviewed the relevant data, considered the comment received, and determined that air safety and the public interest require adopting this AD as proposed except for minor editorial changes. We have determined that these minor changes:

• Are consistent with the intent that was proposed in the NPRM (79 FR 47028, August 12, 2014) for correcting the unsafe condition; and
• Do not add any additional burden upon the public than was already proposed in the NPRM (79 FR 47028, August 12, 2014).

Costs of Compliance

We estimate that this AD affects 851 airplanes of U.S. registry. We also estimate that it will take about 1 work-hour per product to comply with the basic requirements of this AD. The average labor rate is $85 per work-hour. Based on these figures, we estimate the cost of this AD on U.S. operators to be $72,335, or $85 per product.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

1. Is not a “significant regulatory action” under Executive Order 12866;

2. Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);

3. Will not affect intrastate aviation in Alaska; and

4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov/​#!docketDetail;​D=​FAA-2014-0526;​; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone [phone]) is in the ADDRESSES section.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD):

2014-26-10 Airbus: Amendment 39-18061. Docket No. FAA-2014-0526; Directorate Identifier 2013-NM-141-AD.

(a) Effective Date

This AD becomes effective February 25, 2015.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Airbus Model A318-111, -112, -121, and -122 airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-111, -211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes; certificated in any category; all manufacturer serial numbers.

(d) Subject

Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks.

(e) Reason

This AD was prompted by a determination that the maintenance actions for airplane systems susceptible to aging must be mandated. We are issuing this AD to mitigate the risks associated with the aging effects of airplane systems. Such aging effects could change the characteristics leading to an increased potential for failure, which could result in failure of certain life-limited parts, and could reduce the structural integrity of the airplane or reduce the controllability of the airplane.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Maintenance or Inspection Program Revision

Within 30 days after the effective date of this AD: Revise the maintenance or inspection program, as applicable, to incorporate Airbus A318/A319/A320/A321 Airworthiness Limitations Section, ALS Part 4, “Aging Systems Maintenance,” Revision 01, dated June 15, 2012. The initial compliance time for doing the actions is at the applicable time specified in Airbus A318/A319/A320/A321 Airworthiness Limitations Section, ALS Part 4, “Aging Systems Maintenance,” Revision 01, dated June 15, 2012; or within 2 weeks after revising the maintenance or inspection program; whichever occurs later.

(h) No Alternative Actions or Intervals

After accomplishing the revision required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (i) of this AD.

(i) Other FAA AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM-116, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Branch, send it to ATTN: Sanjay Ralhan, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone [phone]; fax [phone]. Information may be emailed to: [e-mail]. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. The AMOC approval letter must specifically reference this AD.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the European Aviation Safety Agency (EASA); or Airbus's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

(j) Related Information

Refer to Mandatory Continuing Airworthiness Information (MCAI) EASA Airworthiness Directive 2013-0146, dated July 16, 2013, for related information. This MCAI may be found in the AD docket on the Internet at http://www.regulations.gov/​#!documentDetail;​D=​FAA-2014-0526-0003.

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) Airbus A318/A319/A320/A321 Airworthiness Limitations Section, ALS Part 4, “Aging Systems Maintenance,” Revision 01, dated June 15, 2012. The revision level of this document is identified on only the title page and in the Record of Revisions. The revision date is not identified on the title page of this document.

(ii) Reserved.

(3) For service information identified in this AD, contact Airbus, Airworthiness Office—EIAS, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone [phone]; fax [phone]; email [e-mail]; Internet http://www.airbus.com.

(4) You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.

(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal-register/​cfr/​ibr-locations.html.

Issued in Renton, Washington, on December 19, 2014.

Michael Kaszycki,

Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.