2018-02604. Airworthiness Directives; Pacific Aerospace Limited Airplanes

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule; request for comments.

SUMMARY:

We are adopting a new airworthiness directive (AD) for Pacific Aerospace Limited Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as abrasion damage of components or wiring behind the instrument panel. We are issuing this AD to require actions to address the unsafe condition on these products.

DATES:

This AD is effective March 5, 2018.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in the AD as of March 5, 2018.

We must receive comments on this AD by March 30, 2018.

ADDRESSES:

You may send comments by any of the following methods:

• Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.
• Fax: [phone].
• Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
• Hand Delivery: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

For service information identified in this AD, contact Pacific Aerospace Limited, Airport Road, Hamilton, Private Bag 3027, Hamilton 3240, New Zealand; phone: [phone]; fax: [phone]; email: [e-mail]; internet: www.aerospace.co.nz. You may view this referenced service information at the FAA, Policy and Innovation Division, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call [phone]. It is also available on the internet at http://www.regulations.gov by searching for locating Docket No. FAA-2018-0067.

Examining the AD Docket

You may examine the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0067; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for Docket Operations (telephone [phone]) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT:

Mike Kiesov, Aerospace Engineer, FAA, Small Airplane Standards Branch, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: [phone]; fax: [phone]; email: [e-mail].

SUPPLEMENTARY INFORMATION:

Discussion

The Civil Aviation Authority, which is the aviation authority for New Zealand, has issued CAA AD DCA/750XL/22, dated December 19, 2017 (referred to after this as “the MCAI”), to correct an unsafe condition for Pacific Aerospace Limited Model 750XL airplanes. To accompany that MCAI, the CAA issued Notification of Airworthiness Directive issued for New Zealand Aeronautical Products IAW ICAO Annex 8, dated December 19, 2017; the Notification states:

This [CAA] AD with effective date 28 December 2017 mandates an inspection of components and wiring behind the instrument panel for possible abrasion damage caused by ventilation hose chafing per the instructions in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/083 issue 1, dated 15 December 2017, or later approved revision.

The [CAA] AD is prompted by two reports of finding abrasion damage behind the instrument panel caused by ventilation hose chafing.

In addition to the required inspection, this AD requires wrapping the ventilation hose with anti-abrasion tape and rerouting the hose. This AD also requires contacting the manufacturer for corrective action if abrasion damage is found during the required inspection. You may examine the MCAI on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0067.

Related Service Information Under 1 CFR Part 51

Pacific Aerospace Limited has issued Pacific Aerospace Mandatory Service Bulletin PACSB/XL/083, Issue 1, dated December 15, 2017. The service information describes procedures for inspection of the ventilation hose behind the instrument panel, wrapping the ventilation hose with anti-abrasion tape, and rerouting the hose. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section of the AD.

FAA's Determination and Requirements of the AD

This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with this State of Design Authority, they have notified us of the unsafe condition described in the MCAI and service information referenced above. We are issuing this AD because we evaluated all information provided by the State of Design Authority and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design.

FAA's Determination of the Effective Date

An unsafe condition exists that requires the immediate adoption of this AD. The FAA has found that the risk to the flying public justifies waiving notice and comment prior to adoption of this rule because chafing of the ventilation hose on instrument components and wiring could cause abrasion damage and lead to short circuit, smoke, and/or fire. Therefore, we determined that notice and opportunity for public comment before issuing this AD are impracticable and that good cause exists for making this amendment effective in fewer than 30 days.

Comments Invited

This AD is a final rule that involves requirements affecting flight safety, and we did not precede it by notice and opportunity for public comment. We invite you to send any written relevant data, views, or arguments about this AD. Send your comments to an address listed under the ADDRESSES section. Include “Docket No. FAA-2018-0067; Directorate Identifier 2017-CE-048-AD” at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this AD. We will consider all comments received by the closing date and may amend this AD because of those comments.

We will post all comments we receive, without change, to http://www.regulations.gov,, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this AD.

Costs of Compliance

We estimate that this AD will affect 22 products of U.S. registry. We also estimate that it would take about 3 work-hours per product to comply with the basic requirements of this AD. The average labor rate is $85 per work-hour. Required parts would cost about $90 per product.

Based on these figures, we estimate the cost of the AD on U.S. operators to be $7,590, or $345 per product.

The extent of abrasion damage could vary from airplane to airplane. We have no way of knowing how many airplanes may have abrasion damage or the extent of that damage; therefore, we have no way of determining an estimated cost for repair.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator.

“Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

This AD is issued in accordance with authority delegated by the Executive Director, Aircraft Certification Service, as authorized by FAA Order 8000.51C. In accordance with that order, issuance of ADs is normally a function of the Compliance and Airworthiness Division, but during this transition period, the Executive Director has delegated the authority to issue ADs applicable to small airplanes, gliders, balloons, airships, domestic business jet transport airplanes, and associated appliances to the Director of the Policy and Innovation Division.

Regulatory Findings

We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979),

(3) Will not affect intrastate aviation in Alaska, and

(4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by adding the following new AD:

2018-03-15 Pacific Aerospace Limited: Amendment 39-19188; Docket No. FAA-2018-0067; Product Identifier 2017-CE-048-AD.

(a) Effective Date

This airworthiness directive (AD) becomes effective March 5, 2018.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Pacific Aerospace Limited Models 750XL airplanes, all serial numbers up to and to include serial number XL220, certificated in any category.

(d) Subject

Air Transport Association of America (ATA) Code 21: Air Conditioning.

(e) Reason

This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as abrasion damage of components or wiring behind the instrument panel. We are issuing this AD to detect and prevent abrasion damage of the wiring and components behind the instrument panel, which could lead to short circuit, smoke, and/or fire.

(f) Actions and Compliance

Unless already done, do the following actions.

(1) Within 15 days after March 5, 2018 (the effective date of this AD), inspect the ventilation hosing, components, and wiring behind the instrument panel for signs of chafing and/or damage following the Accomplishment Instructions in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/083, Issue 1, dated December 15, 2017.

(2) If any signs of chafing and/or abrasion are found during the inspection required in paragraph (f)(1) of this AD, before further flight, contact the manufacturer for an FAA-approved repair approved specifically for this AD. Use the contact information found in paragraph (i)(3) of this AD to contact the manufacturer.

(3) Within 45 days after March 5, 2018 (the effective date of this AD), wrap the ventilation hose in anti-abrasion tape and reroute the hose following the Accomplishment Instructions in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/083, Issue 1, dated December 15, 2017.

(g) Other FAA AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, Small Airplane Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Mike Kiesov, Aerospace Engineer, FAA, Small Airplane Standards Branch, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: [phone]; fax: [phone]; email: [e-mail]. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, Standards Office, FAA; or the Civil Aviation Authority of New Zealand (CAA).

(h) Related Information

Refer to the MCAI by the CAA, AD DCA/750XL/22, dated December 19, 2017; and Pacific Aerospace Mandatory Service Bulletin PACSB/XL/083, Issue 1, dated December 15, 2017, for related information. You may examine the MCAI on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0067.

(i) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise.

(i) Pacific Aerospace Mandatory Service Bulletin PACSB/XL/083, Issue 1, dated December 15, 2017.

(ii) Reserved.

(3) For service information identified in this AD, contact Pacific Aerospace Limited, Airport Road, Hamilton, Private Bag 3027, Hamilton 3240, New Zealand; phone: [phone]; fax: [phone]; email: [e-mail]; internet: www.aerospace.co.nz.

(4) You may view this service information at the FAA, Policy and Innovation Division, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call [phone]. It is also available on the internet at http://www.regulations.gov by searching for locating Docket No. FAA-2018-0067.

(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal-register/​cfr/​ibr-locations.html.

Issued in Kansas City, Missouri, on February 5, 2018.

Melvin J. Johnson,

Deputy Director, Policy & Innovation Division, Aircraft Certification Service.