98-4922. Metalworking Fluids Standards Advisory Committee: Notice of Meeting  

  • [Federal Register Volume 63, Number 38 (Thursday, February 26, 1998)]
    [Notices]
    [Page 9862]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 98-4922]
    
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF LABOR
    
    Occupational Safety and Health Administration
    [Docket No. H-372]
    RIN: 1218-AB58
    
    
    Metalworking Fluids Standards Advisory Committee: Notice of 
    Meeting
    
    AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
    
    ACTION: Metalworking Fluids Standards Advisory Committee: Notice of 
    meeting.
    
    -----------------------------------------------------------------------
    
    SUMMARY: Notice is hereby given that the Metalworking Fluids Standards 
    Advisory Committee (MWFSAC), established under section 7 of the 
    Occupational Safety and Health Act of 1970 to advise the Secretary of 
    Labor on appropriate actions to protect workers from the hazards 
    associated with occupational exposure to metalworking fluids, will meet 
    in Sharonville (Cincinnati), Ohio on Wednesday and Thursday, March 25 
    and 26, 1998 at the Woodfield Suites Hotel, 11029 Dowlin Drive (1-800-
    338-0008).
    
    DATES: The meeting will be held on March 25 and 26, 1998. On March 25, 
    the meeting will begin at 9:00 A.M. and adjourn at approximately 5:00 
    P.M. The meeting will reconvene at approximately noon on March 26, 
    after an information gathering visit to the Ford Motor Company 
    Sharonville plant by various working groups of the committee, and will 
    adjourn at approximately 4:00 P.M.
    
    ADDRESSES: The meeting will take place at the Woodfield Suites Hotel, 
    11029 Dowlin Drive, Sharonville (Cincinnati), Ohio 45211. Mail 
    comments, views or statements in response to this notice to Dr. Peter 
    Infante, U.S. Department of Labor, OSHA, Directorate of Health 
    Standards Programs, Metalworking Fluids Standards Advisory Committee, 
    Room N-3718, 200 Constitution Avenue, N.W., Washington, D.C. 20210.
    
    FOR FURTHER INFORMATION CONTACT:
    Bonnie Friedman, Director, Office of Information and Consumer Affairs, 
    OSHA, (202) 219-8151.
    
    SUPPLEMENTARY INFORMATION: All interested persons are invited to attend 
    the public meetings of the Metalworking Fluids Standards Advisory 
    Committee, including this one, at the time and place indicated above. 
    Individuals with disabilities wishing to attend should contact Theresa 
    Berry at (202) 219-8615 ext. 106 (Fax: 202-219-5986) no later than 
    March 20, 1998, to obtain appropriate accommodations.
    
    Meeting Agenda
    
        This meeting will focus on technology used in large plants to 
    control employee exposure to metalworking fluids. There will be 
    presentations and the committee will discuss general techniques used to 
    control metalworking fluid mist; considerations in selecting and 
    implementing metalworking fluid control technology; ventilation 
    considerations for the design, installation and use of machine tools 
    using metalworking fluids; performance evaluation of mist control 
    filtration systems; exposure comparisons between transfer lines with 
    different levels of control technology on mist control performance, 
    problems with maintenance of control technology and economic and 
    technological feasibility of reducing metalworking fluid mist exposure 
    in the American automobile industry. The Metalworking Fluids Standards 
    Advisory Committee will meet as a whole and also in small working 
    groups.
    
    Public Participation
    
        Written data, views or comments for consideration by the MWFSAC on 
    the various agenda items listed above may be submitted, preferably with 
    20 copies, to Dr. Peter Infante at the address provided above. 
    Submissions received by March 20, 1998 will be provided to the members 
    of the committee and will be included in the record of the meeting. At 
    this meeting it is unlikely that there will be any time for oral 
    presentations by members of the public. However, anyone wishing to make 
    a presentation to the committee should notify Dr. Peter Infante of this 
    fact at the address listed above. The request should state the amount 
    of time desired, the capacity in which the person will appear and a 
    brief outline of the content of the presentation. Requests to make oral 
    presentations to the Committee may be granted if time permits.
    
        Authority: This notice is issued under the authority of sections 
    6(b)(1) and 7(b) of the Occupational Safety and Health Act of 1970 
    (29 U.S.C. 655, 656), the Federal Advisory Committee Act (5 U.S.C. 
    App. 2), and 29 CFR part 1912.
    
        Signed at Washington, D.C. this 20th day of February, 1998.
    Charles N. Jeffress,
    Assistant Secretary of Labor.
    [FR Doc. 98-4922 Filed 2-25-98; 8:45 am]
    BILLING CODE 4510-26-M
    
    
    

Document Information

Published:
02/26/1998
Department:
Occupational Safety and Health Administration
Entry Type:
Notice
Action:
Metalworking Fluids Standards Advisory Committee: Notice of meeting.
Document Number:
98-4922
Dates:
The meeting will be held on March 25 and 26, 1998. On March 25, the meeting will begin at 9:00 A.M. and adjourn at approximately 5:00 P.M. The meeting will reconvene at approximately noon on March 26, after an information gathering visit to the Ford Motor Company Sharonville plant by various working groups of the committee, and will adjourn at approximately 4:00 P.M.
Pages:
9862-9862 (1 pages)
Docket Numbers:
Docket No. H-372
PDF File:
98-4922.pdf