94-8848. Preparation Requirements for Letter-Size ZIP+4 and Barcoded Rate Mailings; Correction  

  • [Federal Register Volume 59, Number 71 (Wednesday, April 13, 1994)]
    [Unknown Section]
    [Page 0]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 94-8848]
    
    
    [[Page Unknown]]
    
    [Federal Register: April 13, 1994]
    
    
    =======================================================================
    -----------------------------------------------------------------------
    
    POSTAL SERVICE
    
    39 CFR Part 111
    
     
    
    Preparation Requirements for Letter-Size ZIP+4 and Barcoded Rate 
    Mailings; Correction
    
    AGENCY: Postal Service.
    
    ACTION: Correction to final regulations.
    
    -----------------------------------------------------------------------
    
    SUMMARY: This document contains corrections to the final regulations 
    which were published March 14, 1994 (59 FR 11886). The regulations 
    related to requirements for the preparation of the residual portion of 
    letter-size automation rate mailings.
    
    EFFECTIVE DATE: The correction is effective June 12, 1994. The 
    effective date of the final rule published on March 14, 1994 (59 FR 
    11886), is delayed to June 12, 1994.
    
    FOR FURTHER INFORMATION CONTACT: Mrs. Lynn Martin, (202) 268-5176.
    
    SUPPLEMENTARY INFORMATION: On March 14, 1994, the Postal Service 
    published a final rule (59 FR 11886-11896) that revised, effective May 
    8, 1994, the standards for preparing the residual portion of second- 
    and third-class letter-size automation rate mailings. This rule also 
    eliminated an existing option for preparing the residual portion of 
    First-Class letter-size automation rate mailings and replaced it with 
    the new options that will be required for second- and third-class 
    letter-size automation rate mailings. This rule also made tray labeling 
    changes for the qualifying portion of letter-size automation rate 
    mailings to accommodate one of the new residual preparation methods. It 
    contained a notice under Supplementary Information that a tray label 
    change was made to AADC trays prepared under DMM M815 to make them 
    consistent with other trays; however that actual rule change was 
    inadvertently omitted.
        Since publishing this final rule, the Postal Service has received 
    comments that the May 8 effective date did not allow adequate time for 
    the process of developing presort software changes, testing and 
    correcting them, distributing them to users, and allowing users time to 
    install and test them. Other commenters have requested that they be 
    able to use the software as soon as they have it ready even if this is 
    before the mandatory compliance date. Accordingly, to accommodate 
    software vendors and mailers that need additional time to implement 
    these new requirements properly, the Postal Service is changing the 
    effective date of the final rule to June 12, 1994. Those mailers who 
    wish to begin preparing mailings in accordance with the provisions of 
    the final rule before such preparation becomes required on June 12, 
    1994, may do so, at their option, as soon as they are able.
        Since publishing the March 14, 1994, final rule, the Postal Service 
    also received a comment that although the supplementary information 
    indicated under Labeling Changes that ``The AADC tray label for two-
    tier package-based preparation under DMM M815 is revised to change the 
    position of the term LTRS on the second line so that it is consistent 
    with other tray labels,'' this change was not set forth in the rule 
    changes. Accordingly, the appropriate change to DMM M815 is set forth 
    in this rule.
        In view of the considerations discussed above, the Postal Service 
    hereby adopts the following amendments to the Domestic Mail Manual, 
    which is incorporated by reference in the Code of Federal Regulations 
    (see 39 CFR 111.1).
    
    List of Subjects in 39 CFR Part 111
    
        Postal Service.
    
    PART 111--[AMENDED]
    
        1. The authority citation for 39 CFR part 111 continues to read as 
    follows:
    
        Authority: 5 U.S.C. 522(a); 39 U.S.C. 101, 401, 403, 404, 3001-
    3011, 3201-3219, 3403-3406, 3621, 5001.
    
    Module M: Mail Preparation
    
        2. Make the following changes to Domestic Mail Manual (DMM) Module 
    M.
    * * * * *
    
    M815 Barcoded--Two-Tier Package-Based Mailings
    
    * * * * *
    
    3.0  Tray Preparation--Qualifying Mail
    
    * * * * *
    
    3.4  Line 2
    
    * * * * *
        c. On AADC trays: LTRS AADC BARCODED.
        A transmittal letter making these changes in the pages of the 
    Domestic Mail Manual will be published and will be transmitted to 
    subscribers automatically. Notice of issuance will be published in the 
    Federal Register as provided by 39 CFR 111.3.
    Stanley F. Mires,
    Chief Counsel, Legislative.
    [FR Doc. 94-8848 Filed 4-12-94; 8:45 am]
    BILLING CODE 7710-12-M
    
    
    

Document Information

Effective Date:
6/12/1994
Published:
04/13/1994
Department:
Postal Service
Entry Type:
Uncategorized Document
Action:
Correction to final regulations.
Document Number:
94-8848
Dates:
The correction is effective June 12, 1994. The effective date of the final rule published on March 14, 1994 (59 FR 11886), is delayed to June 12, 1994.
Pages:
0-0 (1 pages)
Docket Numbers:
Federal Register: April 13, 1994
CFR: (1)
39 CFR 111