01-12986. Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 and -145 Series Airplanes

AGENCY:

Federal Aviation Administration, DOT.

ACTION:

Final rule; request for comments.

SUMMARY:

This document adopts a new airworthiness directive (AD) that is applicable to certain EMBRAER Model EMB-135 and -145 series airplanes. This action requires a one-time inspection to detect incorrect wiring of electrical connectors to the pressure switches and cartridges on the fire extinguisher bottles for the engines and the auxiliary power unit (APU); disconnection and reconnection of the wiring, as necessary; and adjustment of the length of the harnesses on the fire extinguisher bottles to avoid future misconnections. This action is prompted by the issuance of mandatory continuing airworthiness information issued by a foreign civil airworthiness authority. This action is necessary to prevent the issuance of erroneous commands or the receipt of erroneous information pertaining to the fire extinguisher system for the engines and the APU, which could result in the inability to put out a fire in an engine or in the APU. This action is intended to address the identified unsafe condition.

DATES:

Effective June 8, 2001.

The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of June 8, 2001.

Comments for inclusion in the Rules Docket must be received on or before June 25, 2001.

ADDRESSES:

Submit comments in triplicate to the Federal Aviation Administration (FAA), Transport Airplane Directorate, ANM-114, Attention: Rules Docket No. 2001-NM-116-AD, 1601 Lind Avenue, SW., Renton, Washington 98055-4056. Comments may be inspected at this location between 9:00 a.m. and 3:00 p.m., Monday through Friday, except Federal holidays. Comments may be submitted via fax to [phone]. Comments may also be sent via the Internet using the following address: [e-mail]. Comments sent via fax or the Internet must contain “Docket No. 2001-NM-116-AD” in the subject line and need not be submitted in triplicate. Comments sent via the Internet as attached electronic files must be formatted in Microsoft Word 97 for Windows or ASCII text.

The service information referenced in the proposed rule may be obtained from Empresa Brasileira de Aeronautica S.A. (EMBRAER), P.O. Box 343—CEP 12.225, Sao Jose dos Campos—SP, Brazil. This information may be examined at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or the FAA, Atlanta Aircraft Certification Office (ACO), One Crown Center, 1895 Phoenix Boulevard, suite 450, Atlanta, Georgia; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

FOR FURTHER INFORMATION CONTACT:

Thomas Peters, Aerospace Engineer, Program Management and Services Branch, ACE-118A, FAA, Atlanta Aircraft Certification Office, One Crown Center, 1895 Phoenix Boulevard, suite 450, Atlanta, Georgia 30349; telephone [phone]; fax [phone].

SUPPLEMENTARY INFORMATION:

The Departmento de Aviacao Civil (DAC), which is the airworthiness authority for Brazil, notified the FAA that an unsafe condition may exist on certain EMBRAER Model EMB-135 and -145 series airplanes. The DAC advises that electrical connectors to pressure switches and cartridges on the fire extinguisher bottles for the engines and the auxiliary power unit (APU) may have been reversed during production or maintenance. This condition, if not corrected, could result in the issuance of erroneous commands or the receipt of erroneous information pertaining to the fire extinguisher system for the engines and the APU, resulting in the inability to put out a fire in an engine or the APU.

Explanation of Relevant Service Information

EMBRAER has issued Service Bulletin 145-26-0009, dated January 26, 2001, which describes procedures for a one-time general visual inspection to detect incorrect wiring of electrical connectors to the pressure switches and cartridges on the fire extinguisher bottles for the engines and the APU; disconnection and reconnection of the wiring, as necessary; and adjustment of the length of the electrical harnesses on the fire extinguisher bottles to avoid future misconnections. Accomplishment of the actions specified in the service bulletin is intended to adequately address the identified unsafe condition. The DAC classified this service bulletin as mandatory and issued Brazilian airworthiness directive 2001-04-01, dated April 23, 2001, in order to assure the continued airworthiness of these airplanes in Brazil.

FAA's Conclusions

The airplane models are manufactured in Brazil and are type certificated for operation in the United States under the provisions of § 21.29 of the Federal Aviation Regulations (14 CFR 21.29) and the applicable bilateral airworthiness agreement. Pursuant to this bilateral airworthiness agreement, the DAC has kept the FAA informed of the situation described above. The FAA has examined the findings of the DAC, reviewed all available information, and determined that AD action is necessary for products of this type design that are certificated for operation in the United States.

Explanation of Requirements of Rule

Since an unsafe condition has been identified that is likely to exist or develop on other airplanes of the same type design registered in the United States, this AD is being issued to prevent the issuance of erroneous commands or the receipt of erroneous information pertaining to the fire extinguisher system for the engines and the APU, resulting in the inability to put out a fire in an engine or the APU. This AD requires accomplishment of the actions specified in the service bulletin described previously.

Determination of Rule's Effective Date

Since a situation exists that requires the immediate adoption of this regulation, it is found that notice and opportunity for prior public comment hereon are impracticable, and that good cause exists for making this amendment effective in less than 30 days.

Comments Invited

Although this action is in the form of a final rule that involves requirements affecting flight safety and, thus, was not preceded by notice and an opportunity for public comment, comments are invited on this rule. Interested persons are invited to comment on this rule by submitting such written data, views, or arguments as they may desire. Communications shall identify the Rules Docket number and be submitted in triplicate to the address specified under the caption ADDRESSES. All communications received on or before the closing date for comments will be considered, and this rule may be amended in light of the comments received. Factual information that supports the commenter's ideas and suggestions is extremely helpful in evaluating the effectiveness of the AD action and determining whether additional rulemaking action would be needed.

Submit comments using the following format:

• Organize comments issue-by-issue. For example, discuss a request to change the compliance time and a request to change the service bulletin reference as two separate issues.
• For each issue, state what specific change to the AD is being requested.
• Include justification (e.g. reasons or data) for each request.

Comments are specifically invited on the overall regulatory, economic, environmental, and energy aspects of the rule that might suggest a need to modify the rule. All comments submitted will be available, both before and after the closing date for comments, in the Rules Docket for examination by interested persons. A report that summarizes each FAA-public contact concerned with the substance of this AD will be filed in the Rules Docket.

Commenters wishing the FAA to acknowledge receipt of their comments submitted in response to this rule must submit a self-addressed, stamped postcard on which the following statement is made: “Comments to Docket Number 2001-NM-116-AD.” The postcard will be date stamped and returned to the commenter.

Regulatory Impact

The regulations adopted herein will not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, it is determined that this final rule does not have federalism implications under Executive Order 13132.

The FAA has determined that this regulation is an emergency regulation that must be issued immediately to correct an unsafe condition in aircraft, and that it is not a “significant regulatory action” under Executive Order 12866. It has been determined further that this action involves an emergency regulation under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979). If it is determined that this emergency regulation otherwise would be significant under DOT Regulatory Policies and Procedures, a final regulatory evaluation will be prepared and placed in the Rules Docket. A copy of it, if filed, may be obtained from the Rules Docket at the location provided under the caption ADDRESSES.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

Adoption of the Amendment

Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration proposes to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. Section 39.13 is amended by adding the following new airworthiness directive:

2001-10-15 Empresa Brasileira de Aeronautica S.A. (EMBRAER): Amendment 39-12241. Docket 2001-NM-116-AD.

Applicability: Model EMB-135 and -145 series airplanes, certificated in any category, having serial numbers listed in EMBRAER Service Bulletin 145-26-0009, dated January 26, 2001.

Note 1:

This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (b) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it.

Compliance: Required as indicated, unless accomplished previously.

To prevent the issuance of erroneous commands or the receipt of erroneous information pertaining to the fire extinguishing system for the engines and the auxiliary power unit (APU), resulting in the inability to put out a fire in an engine or in the APU, accomplish the following:

Inspection

(a) Within 100 flight hours after the effective date of this AD: Perform a one-time general visual inspection to detect incorrect wiring of electrical connectors to the pressure switches and cartridges on the fire extinguisher bottles for the engines and the APU, in accordance with paragraph 3.D. of the Accomplishment Instructions of EMBRAER Service Bulletin 145-26-0009, dated January 26, 2001.

Note 2:

For the purposes of this AD, a general visual inspection is defined as: “A visual examination of an interior or exterior area, installation, or assembly to detect obvious damage, failure, or irregularity. This level of inspection is made under normally available lighting conditions such as daylight, hangar lighting, flashlight, or drop-light, and may require removal or opening of access panels or doors. Stands, ladders, or platforms may be required to gain proximity to the area being checked.”

(1) If the wiring connections are correct: Prior to further flight, adjust the length of the harnesses to the fire extinguisher bottles, in accordance with the service bulletin.

(2) If the wiring connections are incorrect: Prior to further flight, re-connect them and adjust the length of the harnesses to the fire extinguisher bottles, in accordance with the service bulletin.

Alternative Methods of Compliance

(b) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Atlanta Aircraft Certification Office (ACO), FAA. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Atlanta ACO.

Note 3:

Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Atlanta ACO.

Special Flight Permits

(c) Special flight permits may be issued in accordance with §§ 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished.

Incorporation by Reference

(d) The inspection, reconnection, and adjustment shall be done in accordance with EMBRAER Service Bulletin 145-26-0009, dated January 26, 2001. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from Empresa Brasileira de Aeronautica S.A. (EMBRAER), P.O. Box 343—CEP 12.225, Sao Jose dos Campos—SP, Brazil. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the FAA, Atlanta ACO, One Crown Center, 1895 Phoenix Boulevard, suite 450, Atlanta, Georgia; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

Note 4:

The subject of this AD is addressed in Brazilian airworthiness directive 2001-04-01, dated April 23, 2001.

Effective Date

(e) This amendment becomes effective on June 8, 2001.

Issued in Renton, Washington, on May 17, 2001.

Vi L. Lipski,

Manager, Transport Airplane Directorate, Aircraft Certification Service.