2018-20105. Airworthiness Directives; Bombardier, Inc., Airplanes  

  • Start Preamble

    AGENCY:

    Federal Aviation Administration (FAA), DOT.

    ACTION:

    Notice of proposed rulemaking (NPRM).

    SUMMARY:

    We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-500-1A10 and BD-500-1A11 airplanes. This proposed AD was prompted by reports of dislodged cargo compartment blow-out panels. This proposed AD would require repetitive inspections for any dislodged blow-out panel in the forward and aft cargo compartments, reporting of the inspection findings, and re-installation if necessary. We are proposing this AD to address the unsafe condition on these products.

    DATES:

    We must receive comments on this proposed AD by November 5, 2018.

    ADDRESSES:

    You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:

    • Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.
    • Fax: 202-493-2251.
    • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
    • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

    For service information identified in this NPRM, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; email thd.crj@aero.bombardier.com; internet http://www.bombardier.com. You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

    Examining the AD Docket

    You may examine the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0799; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the regulatory evaluation, any comments received, and other information. The street address for Docket Operations (phone: 800-647-5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Darren Gassetto, Aerospace Engineer, Mechanical Systems and Admin Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone Start Printed Page 47316516-228-7323; fax 516-794-5531; email 9-avs-nyaco-cos@faa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Comments Invited

    We invite you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under the ADDRESSES section. Include “Docket No. FAA-2018-0799; Product Identifier 2018-NM-117-AD” at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this NPRM. We will consider all comments received by the closing date and may amend this NPRM because of those comments.

    We will post all comments we receive, without change, to http://www.regulations.gov,, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this NPRM.

    Discussion

    Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian AD CF-2018-15, dated June 6, 2018 (referred to after this as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain Bombardier, Inc., Model BD-500-1A10 and BD-500-1A11 airplanes. The MCAI states:

    Multiple events of dislodged cargo compartment blow-out panels have been reported in-service. It was determined that these events were caused by baggage impacting the cargo panel cage, or the cargo compartment liner below the cargo panel cage, during baggage loading and unloading on the ground, or during flight due to shifting luggage.

    Dislodged cargo compartment blow-out panels create openings in the forward and aft cargo compartments. In the event of a cargo compartment fire, these unintended openings in the forward and aft cargo compartments would provide a path for smoke, fire, and Halon to enter the adjacent equipment bays, flight deck, and passenger cabin, which could delay smoke detection in the forward and aft cargo compartments and result in the forward and aft cargo compartments not being able to maintain Halon concentration required for fire suppression. The cargo compartment fire may become uncontrollable if this condition is not corrected.

    This AD mandates repetitive [detailed] inspections of the affected forward and aft cargo compartment blow-out panels, and reporting of inspection findings where dislodged blow-out panels have been found [and re-installation of dislodged blow-out panels].

    You may examine the MCAI in the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0799.

    Related Service Information Under 1 CFR Part 51

    Bombardier has issued C Series Data Module BD500-A-J50-10-01-01AAA-310B-A, “Forward and aft cargo compartment blow-out panels—Visual check,” Issue 002, dated May 16, 2018. This service information describes procedures for an inspection for any dislodged blow-out panel in the forward and aft cargo compartments.

    Bombardier has issued C Series Data Module BD500-A-J50-10-01-00AAA-521A-A, “Decompression panels dislodging—Return to basic configuration,” Issue 002, dated May 16, 2018. This service information describes procedures for re-installation of dislodged forward and aft cargo compartment blow-out panels.

    This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

    FAA's Determination

    This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, we have been notified of the unsafe condition described in the MCAI and service information referenced above. We are proposing this AD because we evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop on other products of the same type design.

    Proposed Requirements of This NPRM

    This proposed AD would require accomplishing the actions specified in the service information described previously. This proposed AD also would require sending positive inspection results to Bombardier.

    Costs of Compliance

    We estimate that this proposed AD affects 21 airplanes of U.S. registry. We estimate the following costs to comply with this proposed AD:

    Estimated Costs for Required Actions

    Labor costParts costCost per productCost on U.S. operators
    1 work-hour × $85 per hour = $85$0$85$1,785

    We estimate the following costs to do any necessary on-condition action that would be required based on the results of any required actions. We have no way of determining the number of aircraft that might need this on-condition action:

    Estimated Costs of On-Condition Actions

    Labor costParts costCost per product
    2 work-hours × $85 per hour = $170$0$170

    We estimate that it would take about 1 work-hour per product to comply with the proposed on-condition reporting requirement in this proposed AD. The average labor rate is $85 per hour. Based on these figures, we estimate the cost of reporting the inspection results on U.S. operators to be $85 per product.

    Paperwork Reduction Act

    A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to penalty for failure to comply with a Start Printed Page 47317collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a current valid OMB control number. The control number for the collection of information required by this NPRM is 2120-0056. The paperwork cost associated with this NPRM has been detailed in the Costs of Compliance section of this document and includes time for reviewing instructions, as well as completing and reviewing the collection of information. Therefore, all reporting associated with this NPRM is mandatory. Comments concerning the accuracy of this burden and suggestions for reducing the burden should be directed to the FAA at 800 Independence Ave. SW, Washington, DC 20591, Attn: Information Collection Clearance Officer, AES-200.

    Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

    We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: “General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

    This proposed AD is issued in accordance with authority delegated by the Executive Director, Aircraft Certification Service, as authorized by FAA Order 8000.51C. In accordance with that order, issuance of ADs is normally a function of the Compliance and Airworthiness Division, but during this transition period, the Executive Director has delegated the authority to issue ADs applicable to transport category airplanes and associated appliances to the Director of the System Oversight Division.

    Regulatory Findings

    We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government.

    For the reasons discussed above, I certify this proposed regulation:

    1. Is not a “significant regulatory action” under Executive Order 12866;

    2. Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);

    3. Will not affect intrastate aviation in Alaska; and

    4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

    Start List of Subjects

    List of Subjects in 14 CFR Part 39

    • Air transportation
    • Aircraft
    • Aviation safety
    • Incorporation by reference
    • Safety
    End List of Subjects

    The Proposed Amendment

    Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

    Start Part

    PART 39—AIRWORTHINESS DIRECTIVES

    End Part Start Amendment Part

    1. The authority citation for part 39 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 49 U.S.C. 106(g), 40113, 44701.

    End Authority
    [Amended]
    Start Amendment Part

    2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD):

    End Amendment Part

    Bombardier, Inc.: Docket No. FAA-2018-0799; Product Identifier 2018-NM-117-AD.

    (a) Comments Due Date

    We must receive comments by November 5, 2018.

    (b) Affected ADs

    None.

    (c) Applicability

    This AD applies to Bombardier, Inc., airplanes, certificated in any category, identified in paragraphs (c)(1) and (c)(2) of this AD.

    (1) Model BD-500-1A10 airplanes, serial numbers 50001 and subsequent, equipped with blow-out panel part number D762213-503, D762216-505, or D762209-503.

    (2) Model BD-500-1A11 airplanes, serial numbers 55001 and subsequent, equipped with blow-out panel part number D762213-503, D762216-505, or D762209-503.

    (d) Subject

    Air Transport Association (ATA) of America Code 50, Cargo and accessory compartment.

    (e) Reason

    This AD was prompted by reports of dislodged cargo compartment blow-out panels. We are issuing this AD to address this condition, which could result in openings in the forward and aft cargo compartments. In the event of a cargo compartment fire, these unintended openings in the forward and aft cargo compartments would provide a path for smoke, fire, and Halon to enter the adjacent equipment bays, flight deck, and passenger cabin, which could delay smoke detection in the forward and aft cargo compartments and result in the forward and aft cargo compartments not being able to maintain Halon concentration required for fire suppression. The cargo compartment fire may become uncontrollable if this condition is not addressed, which could result in the loss of controllability of the airplane.

    (f) Compliance

    Comply with this AD within the compliance times specified, unless already done.

    (g) Repetitive Inspections of the Forward and Aft Cargo Compartment Blow-Out Panels and Re-Installation

    Within 7 days or 50 flight cycles, whichever occurs first, after the effective date of this AD, do a detailed inspection for any dislodged blow-out panel in the forward and aft cargo compartments, in accordance with C Series (Bombardier) Data Module BD500-A-J50-10-01-01AAA-310B-A, “Forward and aft cargo compartment blow-out panels—Visual check,” Issue 002, dated May 16, 2018. Re-install all dislodged forward and aft cargo compartment blow-out panels before further flight, in accordance with C Series (Bombardier) Data Module BD500-A-J50-10-01-00AAA-521A-A, “Decompression panels dislodging—Return to basic configuration,” Issue 002, dated May 16, 2018. Thereafter, at intervals not to exceed 100 flight cycles, repeat the detailed inspection for any dislodged blow-out panel in the forward and aft cargo compartments.

    (h) Reporting

    If any blow-out panel in the forward or aft cargo compartments is found dislodged during any inspection required by paragraph (g) of this AD, at the applicable time specified in paragraph (h)(1) or (h)(2) of this AD, report findings to the Bombardier customer response center (CRC) via email: crc_cseries@aero.bombardier.com. Reportable findings include the airplane serial number on which any dislodged blow-out panel was found, the date of inspection, and the part number and location of each dislodged blow-out panel.

    (1) If the inspection was done on or after the effective date of this AD: Submit the report within 30 days after the inspection.

    (2) If the inspection was done before the effective date of this AD: Submit the report within 30 days after the effective date of this AD.

    (i) Paperwork Reduction Act Burden Statement

    A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Start Printed Page 47318Act unless that collection of information displays a current valid OMB Control Number. The OMB Control Number for this information collection is 2120-0056. Public reporting for this collection of information is estimated to be approximately 1 hour per response, including the time for reviewing instructions, completing and reviewing the collection of information. All responses to this collection of information are mandatory. Comments concerning the accuracy of this burden and suggestions for reducing the burden should be directed to the FAA at: 800 Independence Ave. SW, Washington, DC 20591, Attn: Information Collection Clearance Officer, AES-200.

    (j) Other FAA AD Provisions

    The following provisions also apply to this AD:

    (1) Alternative Methods of Compliance (AMOCs): The Manager, New York ACO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

    (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, New York ACO Branch, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.

    (k) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) Canadian AD CF-2018-15, dated June 6, 2018, for related information. This MCAI may be found in the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-0799.

    (2) For more information about this AD, contact Darren Gassetto, Aerospace Engineer, Mechanical Systems and Admin Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7323; fax 516-794-5531; email 9-avs-nyaco-cos@faa.gov.

    (3) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; email thd.crj@aero.bombardier.com; internet http://www.bombardier.com. You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

    Start Signature

    Issued in Des Moines, Washington, on September 10, 2018.

    Michael Kaszycki,

    Acting Director, System Oversight Division, Aircraft Certification Service.

    End Signature End Supplemental Information

    [FR Doc. 2018-20105 Filed 9-18-18; 8:45 am]

    BILLING CODE 4910-13-P

Document Information

Published:
09/19/2018
Department:
Federal Aviation Administration
Entry Type:
Proposed Rule
Action:
Notice of proposed rulemaking (NPRM).
Document Number:
2018-20105
Dates:
We must receive comments on this proposed AD by November 5, 2018.
Pages:
47315-47318 (4 pages)
Docket Numbers:
Docket No. FAA-2018-0799, Product Identifier 2018-NM-117-AD
RINs:
2120-AA64: Airworthiness Directives
RIN Links:
https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives
Topics:
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety
PDF File:
2018-20105.Pdf
CFR: (1)
14 CFR 39.13