05-13485. Delegation of National Emission Standards for Hazardous Air Pollutants for Source Categories; State of Arizona; Pima County Department of Environmental Quality; State of Nevada; Nevada Division of Environmental Protection

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Direct final rule.

SUMMARY:

EPA is amending certain regulations to reflect the current delegation status of national emission standards for hazardous air pollutants (NESHAPs) in Arizona and Nevada. Several NESHAPs were delegated to the Pima County Department of Environmental Quality on December 28, 2004, and to the Nevada Division of Environmental Protection on April 15, 2005. The purpose of this action is to update the listing in the Code of Federal Regulations.

DATES:

This rule is effective on September 6, 2005 without further notice, unless EPA receives adverse comments by August 8, 2005. If we receive such comments, we will publish a timely withdrawal in the Federal Register to notify the public that this direct final rule will not take effect.

ADDRESSES:

Send comments to Andrew Steckel, Rulemaking Office Chief (AIR-4), U.S. Environmental Protection Agency, Region IX, 75 Hawthorne Street, San Francisco, CA 94105-3901, or e-mail to [e-mail], or submit comments at http://www.regulations.gov. Copies of the request for delegation and other supporting documentation are available for public inspection at EPA's Region IX office during normal business hours by appointment.

FOR FURTHER INFORMATION CONTACT:

Mae Wang, EPA Region IX, [phone], [e-mail].

SUPPLEMENTARY INFORMATION:

Throughout this document, “we,” “us” and “our” refer to EPA.

I. Background

A. Delegation of NESHAPs

Section 112(l) of the Clean Air Act, as amended in 1990 (CAA), authorizes EPA to delegate to State or local air pollution control agencies the authority to implement and enforce the standards set out in the Code of Federal Regulations, Title 40 (40 CFR), Part 63, National Emission Standards for Hazardous Air Pollutants for Source Categories. On November 26, 1993, EPA promulgated regulations, codified at 40 CFR part 63, subpart E (hereinafter referred to as “Subpart E”), establishing procedures for EPA's approval of State rules or programs under section 112(l) (see 58 FR 62262). Subpart E was later amended on September 14, 2000 (see 65 FR 55810).

Any request for approval under CAA section 112(l) must meet the approval criteria in 112(l)(5) and subpart E. To streamline the approval process for future applications, a State or local agency may submit a one-time demonstration that it has adequate authorities and resources to implement and enforce any CAA section 112 standards. If such demonstration is approved, then the State or local agency would no longer need to resubmit a demonstration of these same authorities and resources for every subsequent request for delegation of CAA section 112 standards. However, EPA maintains the authority to withdraw its approval if the State does not adequately implement or enforce an approved rule or program.

B. PDEQ Delegations

On October 30, 1996, EPA approved the Pima County Department of Environmental Quality's (PDEQ's) program for accepting delegation of CAA section 112 standards that are unchanged from Federal standards as promulgated (see 61 FR 55910). Additional revisions to that program were approved on September 23, 1998 (see 63 FR 50769). On June 28, 1999, EPA published a direct final action delegating to PDEQ several NESHAPs (see 64 FR 34560). That action explained the procedure for EPA to grant future delegations to PDEQ by letter, with periodic Federal Register listings of standards that have been delegated. On November 8, 2004, PDEQ requested delegation of the following NESHAPs contained in 40 CFR part 63:

• Subpart S—NESHAP from the Pulp and Paper Industry
• Subpart U—National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins
• Subpart AA—NESHAP from Phosphoric Acid Manufacturing Plants
• Subpart BB—NESHAP from Phosphate Fertilizers Production Plants
• Subpart DD—NESHAP from Off-Site Waste and Recovery Operations
• Subpart HH—NESHAP from Oil and Natural Gas Production Facilities
• Subpart LL—NESHAP for Primary Aluminum Reduction Plants
• Subpart OO—National Emission Standards for Tanks—Level 1
• Subpart PP—National Emission Standards for Containers
• Subpart QQ—National Emission Standards for Surface Impoundments
• Subpart RR—National Emission Standards for Individual Drain Systems
• Subpart SS—National Emission Standards for Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process
• Subpart TT—National Emission Standards for Equipment Leaks—Control Level 1
• Subpart UU—National Emission Standards for Equipment Leaks—Control Level 2 Standards
• Subpart VV—National Emission Standards for Oil-Water Separators and Organic-Water Separators
• Subpart WW—National Emission Standards for Storage Vessels (Tanks)—Control Level 2
• Subpart YY—NESHAP for Source Categories: Generic MACT Standards
• Subpart CCC—NESHAP for Steel Pickling—HCl Process Facilities and Hydrochloric Acid Regeneration Plants
• Subpart DDD—NESHAP for Mineral Wool Production
• Subpart EEE—NESHAP from Hazardous Waste Combustors
• Subpart GGG—National Emission Standards for Pharmaceuticals Production
• Subpart HHH—NESHAP from Natural Gas Transmission and Storage Facilities
• Subpart III—NESHAP for Flexible Polyurethane Foam Production
• Subpart JJJ—National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins
• Subpart LLL—NESHAP from the Portland Cement Manufacturing Industry
• Subpart MMM—NESHAP for Pesticide Active Ingredient Production
• Subpart NNN—NESHAP for Wool Fiberglass Manufacturing
• Subpart OOO—National Emission Standards for Hazardous Air Pollutant Emissions: Manufacture of Amino/Phenolic Resins
• Subpart PPP—National Emission Standards for Polyether Polyols Production
• Subpart QQQ—National Emission Standards for Primary Copper Smelting
• Subpart RRR—National Emission Standards for Secondary Aluminum Production
• Subpart TTT—National Emission Standards for Primary Lead Smelting
• Subpart UUU—National Emission Standards for Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur Plan Units
• Subpart VVV—NESHAP: Publicly Owned Treatment Works
• Subpart XXX—National Emission Standards for Ferroalloys Production
• Subpart AAAA—National Emission Standards for Municipal Solid Waste Landfills
• Subpart CCCC—National Emission Standards for Manufacturing of Nutritional Yeast
• Subpart EEEE—National Emission Standards for Organic Liquids Distribution (Non-Gasoline)
• Subpart FFFF—NESHAP: Miscellaneous Organic Chemical Manufacturing
• Subpart GGGG—National Emission Standards for Solvent Extraction for Vegetable Oil Production
• Subpart HHHH—National Emission Standards for Wet-Formed Fiberglass Mat Production
• Subpart JJJJ—National Emission Standards for Paper and Other Web Coating
• Subpart KKKK—NESHAP: Surface Coating of Metal Cans
• Subpart MMMM—NESHAP for Surface Coating of Miscellaneous Metal Parts and Products
• Subpart NNNN—National Emission Standards for Large Appliances
• Subpart OOOO—NESHAP: Printing, Coating, and Dyeing of Fabrics and Other Textiles
• Subpart QQQQ—National Emission Standards for Wood Building Products
• Subpart RRRR—National Emission Standards for Surface Coating of Metal Furniture
• Subpart SSSS—National Emission Standards for Surface Coating of Metal Coil
• Subpart TTTT—National Emission Standards for Leather Finishing Operations
• Subpart UUUU—National Emission Standards for Cellulose Products Manufacturing
• Subpart VVVV—National Emission Standards for Boat Manufacturing
• Subpart WWWW—National Emission Standards for Reinforced Plastics Composites Production
• Subpart XXXX—National Emission Standards for Tire Manufacturing
• Subpart YYYY—NESHAP for Stationary Combustion Turbines
• Subpart AAAAA—NESHAP for Lime Manufacturing Plants
• Subpart BBBBB—National Emission Standards for Semiconductor Manufacturing
• Subpart CCCCC—National Emission Standards for Coke Ovens: Pushing, Quenching, and Battery Stacks
• Subpart EEEEE—NESHAP for Iron and Steel Foundries
• Subpart FFFFF—National Emission Standards for Integrated Iron and Steel
• Subpart GGGGG—NESHAP: Site Remediation
• Subpart HHHHH—NESHAP: Miscellaneous Coating Manufacturing
• Subpart IIIII—NESHAP: Mercury Emissions from Mercury Cell Chlor-Alkali Plants
• Subpart JJJJJ—National Emission Standards for Brick and Structural Clay Products Manufacturing
• Subpart KKKKK—NESHAP for Clay Ceramics Manufacturing
• Subpart LLLLL—National Emission Standards for Asphalt Roofing and Processing
• Subpart MMMMM—National Emission Standards for Flexible Polyurethane Foam Fabrication Operations
• Subpart NNNNN—NESHAP: Hydrochloric Acid Production
• Subpart PPPPP—National Emission Standards for Engine Test Cells/Stands
• Subpart QQQQQ—National Emission Standards for Friction Products Manufacturing
• Subpart RRRRR—NESHAP: Taconite Iron Ore Processing
• Subpart SSSSS—National Emission Standards for Refractory Products Manufacturing
• Subpart TTTTT—NESHAP for Primary Magnesium Refining

On December 28, 2004, EPA granted delegation to PDEQ for these NESHAPs, along with any amendments to previously-delegated NESHAPs, as of July 1, 2004. Today's action is serving to notify the public of the December 28, 2004, delegation and to codify these delegations into the Code of Federal Regulations.

C. NDEP Delegations

On May 27, 1998, EPA published a direct final action delegating to the Nevada Division of Environmental Protection (NDEP) several NESHAPs and approving NDEP's delegation mechanism for future standards (see 63 FR 28906). That action explained the procedure for EPA to grant delegations to NDEP by letter, with periodic Federal Register listings of standards that have been delegated. On December 27, 2004, NDEP requested delegation of the following NESHAPs contained in 40 CFR part 63:

• Subpart J—NESHAP for Polyvinyl Chloride and Copolymers Production
• Subpart MM—NESHAP for Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp Mills
• Subpart XX—National Emission Standards for Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste Operations
• Subpart PPP—NESHAP for Polyether Polyols Production
• Subpart QQQ—NESHAP for Primary Copper Smelting
• Subpart RRR—NESHAP for Secondary Aluminum Production
• Subpart TTT—NESHAP for Primary Lead Smelting
• Subpart UUU—NESHAP for Petroleum Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units
• Subpart VVV—NESHAP: Publicly Owned Treatment Works
• Subpart XXX—NESHAP for Ferroalloys Production: Ferromanganese and Silicomanganese
• Subpart AAAA—NESHAP: Municipal Solid Waste Landfills
• Subpart CCCC—NESHAP: Manufacturing of Nutritional Yeast
• Subpart EEEE—NESHAP for Organic Liquids Distribution (Non-Gasoline)
• Subpart GGGG—NESHAP: Solvent Extraction for Vegetable Oil Production
• Subpart HHHH—NESHAP for Wet-Formed Fiberglass Mat Production
• Subpart JJJJ—NESHAP: Paper and Other Web Coating
• Subpart KKKK—NESHAP: Surface Coating of Metal Cans
• Subpart MMMM—NESHAP for Surface Coating of Miscellaneous Metal Parts and Products
• Subpart NNNN—NESHAP: Surface Coating of Large Appliances
• Subpart OOOO—NESHAP: Printing, Coating, and Dyeing of Fabrics and Other Textiles
• Subpart QQQQ—NESHAP: Surface Coating of Wood Building Products
• Subpart RRRR—NESHAP: Surface Coating of Metal Furniture
• Subpart SSSS—NESHAP: Surface Coating of Metal Coil
• Subpart TTTT—NESHAP for Leather Finishing Operations
• Subpart UUUU—NESHAP for Cellulose Products Manufacturing
• Subpart VVVV—NESHAP for Boat Manufacturing
• Subpart WWWW—NESHAP: Reinforced Plastic Composites Production
• Subpart XXXX—NESHAP: Rubber Tire Manufacturing
• Subpart YYYY—NESHAP for Stationary Combustion Turbines
• Subpart ZZZZ—NESHAP for Stationary Reciprocating Internal Combustion Engines
• Subpart AAAAA—NESHAP for Lime Manufacturing Plants
• Subpart BBBBB—NESHAP for Semiconductor Manufacturing
• Subpart CCCCC—NESHAP for Coke Ovens: Pushing, Quenching, and Battery Stacks
• Subpart DDDDD—NESHAP for Industrial, Commercial, and Institutional Boilers and Process Heaters
• Subpart FFFFF—NESHAP for Integrated Iron and Steel Manufacturing Facilities
• Subpart JJJJJ—NESHAP for Brick and Structural Clay Products Manufacturing
• Subpart KKKKK—NESHAP for Clay Ceramics Manufacturing
• Subpart LLLLL—NESHAP: Asphalt Processing and Asphalt Roofing Manufacturing
• Subpart MMMMM—NESHAP: Flexible Polyurethane Foam Fabrication Operations
• Subpart NNNNN—NESHAP: Hydrochloric Acid Production
• Subpart PPPPP—NESHAP for Engine Test Cells/Stands
• Subpart QQQQQ—NESHAP for Friction Materials Manufacturing Facilities
• Subpart SSSSS—NESHAP for Refractory Products Manufacturing

On April 15, 2005, EPA granted delegation to NDEP for these NESHAPs, along with any amendments to previously-delegated NESHAPs, as of July 1, 2004. EPA also granted to NDEP delegation of amendments to 40 CFR part 63, subpart YYYY (Stationary Combustion Turbines) which were published in the Federal Register on August 18, 2004. Today's action is serving to notify the public of the April 15, 2005, delegations and to codify these delegations into the Code of Federal Regulations.

II. EPA Action

Today's document serves to notify the public of the December 28, 2004, delegation of NESHAPs to PDEQ, and the April 15, 2005, delegation of NESHAPs to NDEP. Today's action will codify these delegations into the Code of Federal Regulations.

III. Administrative Requirements

Under Executive Order 12866 (58 FR 51735, October 4, 1993), this action is not a “significant regulatory action” and therefore is not subject to review by the Office of Management and Budget. For this reason, this action is also not subject to Executive Order 13211, “Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use” (66 FR 28355, May 22, 2001). This action merely updates the list of approved delegations in the Code of Federal Regulations and imposes no additional requirements. Accordingly, the Administrator certifies that this rule will not have a significant economic impact on a substantial number of small entities under the Regulatory Flexibility Act (5 U.S.C. 601 et seq.). Because this rule does not impose any additional enforceable duty beyond that required by State law, it does not contain any unfunded mandate or significantly or uniquely affect small governments, as described in the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4).

This rule also does not have tribal implications because it will not have a substantial direct effect on one or more Indian tribes, on the relationship between the Federal Government and Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes, as specified by Executive Order 13175 (65 FR 67249, November 9, 2000). This action also does not have Federalism implications because it does not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132 (64 FR 43255, August 10, 1999). This action merely updates the list of already-approved delegations, and does not alter the relationship or the distribution of power and responsibilities established in the CAA. This rule also is not subject to Executive Order 13045 “Protection of Children from Environmental Health Risks and Safety Risks” (62 FR 19885, April 23, 1997), because it is not economically significant.

In reviewing State delegation submissions, our role is to approve State choices, provided that they meet the criteria of the CAA. In this context, in the absence of a prior existing requirement for the State to use voluntary consensus standards (VCS), EPA has no authority to disapprove State submissions for failure to use VCS. It would thus be inconsistent with applicable law for EPA, when it reviews a State submission, to use VCS in place of a State submission that otherwise satisfies the provisions of the CAA. Thus, the requirements of section 12(d) of the National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) do not apply. This rule does not impose an information collection burden under the provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.).

The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the Small Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and to the Comptroller General of the United States. EPA will submit a report containing this rule and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the Federal Register. A major rule cannot take effect until 60 days after it is published in the Federal Register. This action is not a “major rule” as defined by 5 U.S.C. 804(2).

Under section 307(b)(1) of the Clean Air Act, petitions for judicial review of this action must be filed in the United States Court of Appeals for the appropriate circuit by September 6, 2005. Filing a petition for reconsideration by the Administrator of this final rule does not affect the finality of this rule for the purposes of judicial review nor does it extend the time within which a petition for judicial review may be filed, and shall not postpone the effectiveness of such rule or action. This action may not be challenged later in proceedings to enforce its requirements (see section 307(b)(2)).

List of Subjects in 40 CFR Part 63

• Environmental protection
• Administrative practice and procedure
• Air pollution control
• Hazardous substances
• Intergovernmental relations
• Reporting and recordkeeping requirements

Authority: This action is issued under the authority of section 112 of the Clean Air Act, as amended, 42 U.S.C. 7412.

Dated: June 24, 2005.

Deborah Jordan,

Director, Air Division, Region IX.

Title 40, chapter I, part 63 of the Code of Federal Regulations is amended as follows:

PART 63—[AMENDED]

1. The authority citation for part 63 continues to read as follows:

Authority: 42 U.S.C. 7401, et seq.

Subpart E—Approval of State Programs and Delegation of Federal Authorities

2. Section 63.99 is amended by revising paragraphs (a)(3) and (a)(28)(i) to read as follows:

§ 63.99

Delegated Federal authorities.

(a)* * *

(3) Arizona. The following table lists the specific part 63 standards that have been delegated unchanged to the air pollution control agencies in the State of Arizona. The (X) symbol is used to indicate each category that has been delegated.

Delegation Status for Part 63 Standards—Arizona

Subpart	Description	ADEQ 1	MCESD 2	PDEQ 3	PCAQCD 4
A	General Provisions	X	X	X	X
F	Synthetic Organic Chemical Manufacturing Industry	X	X	X	X
G	Synthetic Organic Chemical Manufacturing Industry: Process Vents, Storage Vessels, Transfer Operations, and Wastewater	X	X	X	X
H	Organic Hazardous Air Pollutants: Equipment Leaks	X	X	X	X
I	Organic Hazardous Air Pollutants: Certain Processes Subject to the Negotiated Regulation for Equipment Leaks	X	X	X	X
L	Coke Oven Batteries	X	X	X	X
M	Perchloroethylene Dry Cleaning	X	X	X	X
N	Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks	X	X	X	X
O	Ethylene Oxide Sterilization Facilities	X	X	X	X
Q	Industrial Process Cooling Towers	X	X	X	X
R	Gasoline Distribution Facilities	X	X	X	X
S	Pulp and Paper	X		X
T	Halogenated Solvent Cleaning	X	X	X	X
U	Group I Polymers and Resins	X	X	X	X
W	Epoxy Resins Production and Non-Nylon Polyamides Production	X	X	X	X
X	Secondary Lead Smelting	X	X	X	X
AA	Phosphoric Acid Manufacturing Plants	X		X
BB	Phosphate Fertilizers Production Plants	X		X
CC	Petroleum Refineries	X	X	X	X
DD	Off-Site Waste and Recovery Operations	X	X	X	X
EE	Magnetic Tape Manufacturing Operations	X	X	X	X
GG	Aerospace Manufacturing and Rework Facilities	X	X	X	X
HH	Oil and Natural Gas Production Facilities	X		X
JJ	Wood Furniture Manufacturing Operations	X	X	X	X
KK	Printing and Publishing Industry	X	X	X	X
LL	Primary Aluminum Reduction Plants	X		X
OO	Tanks—Level 1	X	X	X	X
PP	Containers	X	X	X	X
QQ	Surface Impoundments	X	X	X	X
RR	Individual Drain Systems	X	X	X	X
SS	Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process	X		X
TT	Equipment Leaks—Control Level 1	X		X
UU	Equipment Leaks—Control Level 2	X		X
VV	Oil-Water Separators and Organic-Water Separators	X	X	X	X
WW	Storage Vessels (Tanks) —Control Level 2	X		X
YY	Generic MACT Standards	X		X
CCC	Steel Pickling	X		X
DDD	Mineral Wool Production	X		X
EEE	Hazardous Waste Combustors	X		X
GGG	Pharmaceuticals Production	X		X
HHH	Natural Gas Transmission and Storage Facilities	X		X
III	Flexible Polyurethane Foam Production	X		X
JJJ	Group IV Polymers and Resins	X	X	X	X
LLL	Portland Cement Manufacturing Industry	X		X
MMM	Pesticide Active Ingredient Production	X		X
NNN	Wool Fiberglass Manufacturing	X		X
OOO	Manufacture of Amino/Phenolic Resins	X		X
PPP	Polyether Polyols Production	X		X
QQQ	Primary Copper Smelting			X
RRR	Secondary Aluminum Production			X
TTT	Primary Lead Smelting	X		X
UUU	Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur Recovery Units			X
VVV	Publicly Owned Treatment Works			X
XXX	Ferroalloys Production	X		X
AAAA	Municipal Solid Waste Landfills			X
CCCC	Manufacturing of Nutritional Yeast			X
EEEE	Organic Liquids Distribution (non-gasoline)			X
FFFF	Miscellaneous Organic Chemical Manufacturing			X
GGGG	Solvent Extraction for Vegetable Oil Production			X
HHHH	Wet-Formed Fiberglass Mat Production			X
JJJJ	Paper and Other Web Coating			X
KKKK	Surface Coating of Metal Cans			X
MMMM	Miscellaneous Metal Parts and Products			X
NNNN	Large Appliances			X
OOOO	Printing, Coating, and Dyeing of Fabrics and Other Textiles			X
QQQQ	Wood Building Products			X
RRRR	Surface Coating of Metal Furniture			X
SSSS	Surface Coating of Metal Coil			X
TTTT	Leather Finishing Operations			X
UUUU	Cellulose Products Manufacturing			X
VVVV	Boat Manufacturing			X
WWWW	Reinforced Plastics Composites Production			X
XXXX	Tire Manufacturing			X
YYYY	Stationary Combustion Turbines			X
AAAAA	Lime Manufacturing Plants			X
BBBBB	Semiconductor Manufacturing			X
CCCCC	Coke Oven: Pushing, Quenching and Battery Stacks			X
EEEEE	Iron and Steel Foundries			X
FFFFF	Integrated Iron and Steel			X
GGGGG	Site Remediation			X
HHHHH	Miscellaneous Coating Manufacturing			X
IIIII	Mercury Emissions from Mercury Cell Chlor-Alkali Plants			X
JJJJJ	Brick and Structural Clay Products Manufacturing			X
KKKKK	Clay Ceramics Manufacturing			X
LLLLL	Asphalt Roofing and Processing			X
MMMMM	Flexible Polyurethane Foam Fabrication Operation			X
NNNNN	Hydrochloric Acid Production			X
PPPPP	Engine Test Cells/Stands			X
QQQQQ	Friction Products Manufacturing			X
RRRRR	Taconite Iron Ore Processing			X
SSSSS	Refractory Products Manufacturing			X
TTTTT	Primary Magnesium Refining			X
1 Arizona Department of Environmental Quality.
2 Maricopa County Environmental Services Department.
3 Pima County Department of Environmental Quality.
4 Pinal County Air Quality Control District.

* * * * *

(28) * * *

(i) The following table lists the specific part 63 standards that have been delegated unchanged to the air pollution control agencies in the State of Nevada. The (X) symbol is used to indicate each category that has been delegated.

Delegation Status for Part 63 Standards—Nevada

Subpart	Description	NDEP 1	WCAQMD 2	CCDAQM 3
A	General Provisions	X	X
F	Synthetic Organic Chemical Manufacturing Industry	X
G	Synthetic Organic Chemical Manufacturing Industry: Process Vents, Storage Vessels, Transfer Operations, and Wastewater	X
H	Organic Hazardous Air Pollutants: Equipment Leaks	X
I	Organic Hazardous Air Pollutants: Certain Processes Subject to the Negotiated Regulation for Equipment Leaks	X
J	Polyvinyl Chloride and Copolymers Production	X
L	Coke Oven Batteries	X
M	Perchloroethylene Dry Cleaning	X	X
N	Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks	X	X
O	Ethylene Oxide Sterilization Facilities	X	X
Q	Industrial Process Cooling Towers	X
R	Gasoline Distribution Facilities	X	X
S	Pulp and Paper	X
T	Halogenated Solvent Cleaning	X	X
U	Group I Polymers and Resins	X
W	Epoxy Resins Production and Non-Nylon Polyamides Production	X
X	Secondary Lead Smelting	X
Y	Marine Tank Vessel Loading Operations	X
AA	Phosphoric Acid Manufacturing Plants	X
BB	Phosphate Fertilizers Production Plants	X
CC	Petroleum Refineries	X
DD	Off-Site Waste and Recovery Operations	X
EE	Magnetic Tape Manufacturing Operations	X
GG	Aerospace Manufacturing and Rework Facilities	X
HH	Oil and Natural Gas Production Facilities	X
II	Shipbuilding and Ship Repair (Surface Coating)	X
JJ	Wood Furniture Manufacturing Operations	X
KK	Printing and Publishing Industry	X	X
LL	Primary Aluminum Reduction Plants	X
MM	Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp Mills	X
OO	Tanks—Level 1	X
PP	Containers	X
QQ	Surface Impoundments	X
RR	Individual Drain Systems	X
SS	Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process	X
TT	Equipment Leaks—Control Level 1	X
UU	Equipment Leaks—Control Level 2	X
VV	Oil-Water Separators and Organic-Water Separators	X
WW	Storage Vessels (Tanks)—Control Level 2	X
XX	Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste Operations	X
YY	Generic MACT Standards	X
CCC	Steel Pickling	X
DDD	Mineral Wool Production	X
EEE	Hazardous Waste Combustors	X
GGG	Pharmaceuticals Production	X
HHH	Natural Gas Transmission and Storage Facilities	X
III	Flexible Polyurethane Foam Production	X
JJJ	Group IV Polymers and Resins	X
LLL	Portland Cement Manufacturing Industry	X
MMM	Pesticide Active Ingredient Production	X
NNN	Wool Fiberglass Manufacturing	X
OOO	Manufacture of Amino/Phenolic Resins	X
PPP	Polyether Polyols Production	X
QQQ	Primary Copper Smelting	X
RRR	Secondary Aluminum Production	X
TTT	Primary Lead Smelting	X
UUU	Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur Recovery Units	X
VVV	Publicly Owned Treatment Works	X
XXX	Ferroalloys Production	X
AAAA	Municipal Solid Waste Landfills	X
CCCC	Manufacturing of Nutritional Yeast	X
EEEE	Organic Liquids Distribution (non-gasoline)	X
GGGG	Solvent Extraction for Vegetable Oil Production	X
HHHH	Wet-Formed Fiberglass Mat Production	X
JJJJ	Paper and Other Web Coating	X
KKKK	Surface Coating of Metal Cans	X
MMMM	Miscellaneous Metal Parts and Products	X
NNNN	Large Appliances	X
OOOO	Printing, Coating, and Dyeing of Fabrics and Other Textiles	X
QQQQ	Wood Building Products	X
RRRR	Surface Coating of Metal Furniture	X
SSSS	Surface Coating of Metal Coil	X
TTTT	Leather Finishing Operations	X
UUUU	Cellulose Products Manufacturing	X
VVVV	Boat Manufacturing	X
WWWW	Reinforced Plastics Composites Production	X
XXXX	Tire Manufacturing	X
YYYY	Stationary Combustion Turbines	X
ZZZZ	Stationary Reciprocating Internal Combustion Engines	X
AAAAA	Lime Manufacturing Plants	X
BBBBB	Semiconductor Manufacturing	X
CCCCC	Coke Oven: Pushing, Quenching and Battery Stacks	X
DDDDD	Industrial, Commercial, and Institutional Boiler and Process Heaters	X
FFFFF	Integrated Iron and Steel	X
JJJJJ	Brick and Structural Clay Products Manufacturing	X
KKKKK	Clay Ceramics Manufacturing	X
LLLLL	Asphalt Roofing and Processing	X
MMMMM	Flexible Polyurethane Foam Fabrication Operation	X
NNNNN	Hydrochloric Acid Production	X
PPPPP	Engine Test Cells/Stands	X
QQQQQ	Friction Products Manufacturing	X
SSSSS	Refractory Products Manufacturing	X
1 Nevada Division of Environmental Protection.
2 Washoe County Air Quality Management Division.
3 Clark County Department of Air Quality Management.

* * * * *