Comment submitted by Earthjustice

Document ID: EPA-HQ-OAR-2006-0897-0032
Document Type: Public Submission
Agency: Environmental Protection Agency
Received Date: May 04 2007, at 12:00 AM Eastern Daylight Time
Date Posted: May 9 2007, at 12:00 AM Eastern Standard Time
Comment Start Date: April 4 2007, at 12:00 AM Eastern Standard Time
Comment Due Date: May 4 2007, at 11:59 PM Eastern Standard Time
Tracking Number: 802358b2
View Document:

This is comment on Proposed Rule

National Emission Standards for Hazardous Air Pollutants for Area Sources: Acrylic and Modacrylic Fibers Production, Carbon Black Production, Chemical Manufacturing: Chromium Compounds, Flexible Polyurethane Foam Production and Fabrication, Lead Acid Battery Manufacturing, and Wood Preserving

View Comment

Please accept the Comments of Earthjustice on "National Emission Standards for Hazardous Air Pollutants for Area Sources: Acrylic and Modacrylic Fibers Production, Carbon Black Production, Chemical Manufacturing: Chromium Compounds, Flexible Polyurethane Foam Production and Fabrication, Lead Acid Battery Manufacturing, and Wood Preserving," and two supporting attachments: Exhibit A: ICAC "Particulate Controls Technologies" Exhibit B: EPA/452/B-02-001, Chapter 1 - Baghouses & Filters

Attachments:

Comment attachment submitted by Earthjustice

Title:
Comment attachment submitted by Earthjustice

View Attachment:

Comment attachment submitted by Earthjustice (2)

Title:
Comment attachment submitted by Earthjustice (2)

Abstract:
Particulate Controls Technologies: This document is copyrighted and may not be reproduced without consent of the copyright holder.

View Attachment:

Comment attachment submitted by Earthjustice (3)

Title:
Comment attachment submitted by Earthjustice (3)

Abstract:
The EPA Air Pollution Control Cost Manual, Section 6: Particulate Matter Controls [EPA/452/B-02-001]

View Attachment:

Original copyright document for attachment OAR-2006-0897-0032.2 Particulate Control Technologies

Title:
Original copyright document for attachment OAR-2006-0897-0032.2 Particulate Control Technologies

Abstract:
This document can be viewed at the USEPA Docket Center Public Reading Room. Address: 1302 Constitution Ave, NW Room 3334 Washington, DC 20004 Telephone: 202-566-1744 Fax: 202-566-9744 Email: docket-customerservice@epa.gov

View Attachment:

Related Comments

View All

Total: 24

Comment submitted by Cheryl E. Cortright, Environmental Manager, Flex Foam, a division of Western Bonded Products, Inc.
Public Submission Posted: 05/08/2007 ID: EPA-HQ-OAR-2006-0897-0028