Part 162 - Engineering Equipment  


Subpart 162.017 - General Provisions; Valves, Pressure-Vacuum Relief, for Tank Vessels
§ 162.017-0 - xxx
§ 162.017-1 - Preemptive effect; incorporation by reference.
§ 162.017-2 - Type.
§ 162.017-3 - Materials, construction, and workmanship.
§ 162.017-4 - Inspections and testing.
§ 162.017-5 - Marking.
§ 162.017-6 - Procedure for approval.
Subpart 162.018 - Safety Relief Valves, Liquefied Compressed Gas
§ 162.018-1 - Applicable specifications, and referenced material.
§ 162.018-2 - Scope.
§ 162.018-3 - Materials.
§ 162.018-4 - Construction and workmanship.
§ 162.018-5 - Blow-down adjustment and popping tolerance.
§ 162.018-6 - Marking.
§ 162.018-7 - Flow rating tests.
§ 162.018-8 - Procedure for approval.
Subpart 162.027 - Combination Firehose Nozzles
§ 162.027-1 - Scope.
§ 162.027-2 - Incorporation by reference.
§ 162.027-3 - Design, construction, testing, and marking requirements.
§ 162.027-4 - Approval procedures.
Subpart 162.028 - Extinguishers, Fire, Portable, Marine Type
§ 162.028-1 - Incorporation by reference.
§ 162.028-2 - Classification.
§ 162.028-3 - Requirements.
§ 162.028-4 - Marine type label.
§ 162.028-5 - Recognized laboratories.
§ 162.028-6 - Examinations, tests, and inspections.
§ 162.028-7 - Procedure for listing and labeling.
§ 162.028-8 - Termination of listing or labeling.
Subpart 162.039 - Extinguishers, Fire, Semi-portable, Marine Type
§ 162.039-1 - Incorporation by reference.
§ 162.039-2 - Classification.
§ 162.039-3 - Requirements.
§ 162.039-4 - Marine type label.
§ 162.039-5 - Recognized laboratories.
§ 162.039-6 - Examinations, tests, and inspections.
§ 162.039-7 - Procedure for listing and labeling.
§ 162.039-8 - Termination of listing or labeling.
Subpart 162.050 - Pollution Prevention Equipment
§ 162.050-1 - Scope.
§ 162.050-3 - Definitions.
§ 162.050-4 - Incorporation by reference: Where can I get a copy of the publications mentioned in this part?
§ 162.050-5 - Contents of application.
§ 162.050-7 - Approval procedures.
§ 162.050-9 - Test report.
§ 162.050-11 - Marking.
§ 162.050-13 - Factory production and inspection.
§ 162.050-14 - Sample collection and preservation.
§ 162.050-15 - Designation of facilities.
§ 162.050-17 - Separator test rig.
§ 162.050-19 - Oil content meter and bilge alarm test rig.
§ 162.050-20 - Separator and bilge alarm test fluids.
§ 162.050-21 - Separator: Design specification.
§ 162.050-23 - Separator: Approval tests.
§ 162.050-25 - Cargo monitor: Design specification.
§ 162.050-27 - Oil content meter: Approval tests.
§ 162.050-29 - Bilge monitor: Design specification.
§ 162.050-31 - Bilge monitor: Approval tests.
§ 162.050-33 - Bilge alarm: Design specification.
§ 162.050-35 - Bilge alarm: Approval tests.
§ 162.050-37 - Vibration test.
§ 162.050-39 - Measurement of oil content.
Subpart 162.060 - Ballast Water Management Systems
§ 162.060-1 - Purpose and scope.
§ 162.060-3 - Definitions.
§ 162.060-5 - Incorporation by reference.
§ 162.060-10 - Approval procedures.
§ 162.060-12 - Use and acceptance of existing test data.
§ 162.060-14 - Information requirements for the ballast water management system (BWMS) application.
§ 162.060-16 - Changes to an approved ballast water management system (BWMS).
§ 162.060-18 - Suspension, withdrawal, or termination of approval.
§ 162.060-20 - Design and construction requirements.
§ 162.060-22 - Marking requirements.
§ 162.060-24 - Test Plan requirements.
§ 162.060-26 - Land-based testing requirements.
§ 162.060-28 - Shipboard testing requirements.
§ 162.060-30 - Testing requirements for ballast water management system (BWMS) components.
§ 162.060-32 - Testing and evaluation requirements for active substances, preparations, and relevant chemicals.
§ 162.060-34 - Test Report requirements.
§ 162.060-36 - Quality Assurance Project Plan (QAPP) requirements.
§ 162.060-38 - Operation, Maintenance, and Safety Manual (OMSM).
§ 162.060-40 - Requirements for Independent Laboratories (ILs).
§ 162.060-42 - Responsibilities for Independent Laboratories (ILs).
Subpart 162.161 - Fixed Clean Agent Fire Extinguishing Systems
§ 162.161-1 - Scope.
§ 162.161-2 - Incorporation by reference.
§ 162.161-3 - Materials.
§ 162.161-4 - Construction.
§ 162.161-5 - Instruction manual for design, installation, operation, and maintenance.
§ 162.161-6 - Tests for approval.
§ 162.161-7 - Inspections at production.
§ 162.161-8 - Marking.
§ 162.161-9 - Procedure for approval.
Subpart 162.163 - Portable Foam Applicators
§ 162.163-1 - Scope.
§ 162.163-2 - Incorporation by reference.
§ 162.163-3 - Performance, design, construction, testing, and marking requirements.
§ 162.163-4 - Approval procedures.