 |
Code of Federal Regulations (Last Updated: April 5, 2024) |
 |
Title 46 - Shipping |
|
|
Chapter I - Coast Guard, Department of Homeland Security |
|
|
SubChapter Q - Equipment, Construction, and Materials: Specifications and Approval |
|
|
Part 162 - Engineering Equipment |
| Subpart 162.017 - General Provisions; Valves, Pressure-Vacuum Relief, for Tank Vessels |
| § 162.017-1 - Preemptive effect; incorporation by reference. |
| § 162.017-2 - Type. |
| § 162.017-3 - Materials, construction, and workmanship. |
| § 162.017-4 - Inspections and testing. |
| § 162.017-5 - Marking. |
| § 162.017-6 - Procedure for approval. |
| Subpart 162.018 - Safety Relief Valves, Liquefied Compressed Gas |
| § 162.018-1 - Applicable specifications, and referenced material. |
| § 162.018-2 - Scope. |
| § 162.018-3 - Materials. |
| § 162.018-4 - Construction and workmanship. |
| § 162.018-5 - Blow-down adjustment and popping tolerance. |
| § 162.018-6 - Marking. |
| § 162.018-7 - Flow rating tests. |
| § 162.018-8 - Procedure for approval. |
| Subpart 162.027 - Combination Firehose Nozzles |
| § 162.027-1 - Scope. |
| § 162.027-2 - Incorporation by reference. |
| § 162.027-3 - Design, construction, testing, and marking requirements. |
| § 162.027-4 - Approval procedures. |
| Subpart 162.028 - Extinguishers, Fire, Portable, Marine Type |
| § 162.028-1 - Incorporation by reference. |
| § 162.028-2 - Classification. |
| § 162.028-3 - Requirements. |
| § 162.028-4 - Marine type label. |
| § 162.028-5 - Recognized laboratories. |
| § 162.028-6 - Examinations, tests, and inspections. |
| § 162.028-7 - Procedure for listing and labeling. |
| § 162.028-8 - Termination of listing or labeling. |
| Subpart 162.039 - Extinguishers, Fire, Semi-portable, Marine Type |
| § 162.039-1 - Incorporation by reference. |
| § 162.039-2 - Classification. |
| § 162.039-3 - Requirements. |
| § 162.039-4 - Marine type label. |
| § 162.039-5 - Recognized laboratories. |
| § 162.039-6 - Examinations, tests, and inspections. |
| § 162.039-7 - Procedure for listing and labeling. |
| § 162.039-8 - Termination of listing or labeling. |
| Subpart 162.050 - Pollution Prevention Equipment |
| § 162.050-1 - Scope. |
| § 162.050-3 - Definitions. |
| § 162.050-4 - Incorporation by reference: Where can I get a copy of the publications mentioned in this part? |
| § 162.050-5 - Contents of application. |
| § 162.050-7 - Approval procedures. |
| § 162.050-9 - Test report. |
| § 162.050-11 - Marking. |
| § 162.050-13 - Factory production and inspection. |
| § 162.050-14 - Sample collection and preservation. |
| § 162.050-15 - Designation of facilities. |
| § 162.050-17 - Separator test rig. |
| § 162.050-19 - Oil content meter and bilge alarm test rig. |
| § 162.050-20 - Separator and bilge alarm test fluids. |
| § 162.050-21 - Separator: Design specification. |
| § 162.050-23 - Separator: Approval tests. |
| § 162.050-25 - Cargo monitor: Design specification. |
| § 162.050-27 - Oil content meter: Approval tests. |
| § 162.050-29 - Bilge monitor: Design specification. |
| § 162.050-31 - Bilge monitor: Approval tests. |
| § 162.050-33 - Bilge alarm: Design specification. |
| § 162.050-35 - Bilge alarm: Approval tests. |
| § 162.050-37 - Vibration test. |
| § 162.050-39 - Measurement of oil content. |
| Subpart 162.060 - Ballast Water Management Systems |
| § 162.060-1 - Purpose and scope. |
| § 162.060-3 - Definitions. |
| § 162.060-5 - Incorporation by reference. |
| § 162.060-10 - Approval procedures. |
| § 162.060-12 - Use and acceptance of existing test data. |
| § 162.060-14 - Information requirements for the ballast water management system (BWMS) application. |
| § 162.060-16 - Changes to an approved ballast water management system (BWMS). |
| § 162.060-18 - Suspension, withdrawal, or termination of approval. |
| § 162.060-20 - Design and construction requirements. |
| § 162.060-22 - Marking requirements. |
| § 162.060-24 - Test Plan requirements. |
| § 162.060-26 - Land-based testing requirements. |
| § 162.060-28 - Shipboard testing requirements. |
| § 162.060-30 - Testing requirements for ballast water management system (BWMS) components. |
| § 162.060-32 - Testing and evaluation requirements for active substances, preparations, and relevant chemicals. |
| § 162.060-34 - Test Report requirements. |
| § 162.060-36 - Quality Assurance Project Plan (QAPP) requirements. |
| § 162.060-38 - Operation, Maintenance, and Safety Manual (OMSM). |
| § 162.060-40 - Requirements for Independent Laboratories (ILs). |
| § 162.060-42 - Responsibilities for Independent Laboratories (ILs). |
| Subpart 162.161 - Fixed Clean Agent Fire Extinguishing Systems |
| § 162.161-1 - Scope. |
| § 162.161-2 - Incorporation by reference. |
| § 162.161-3 - Materials. |
| § 162.161-4 - Construction. |
| § 162.161-5 - Instruction manual for design, installation, operation, and maintenance. |
| § 162.161-6 - Tests for approval. |
| § 162.161-7 - Inspections at production. |
| § 162.161-8 - Marking. |
| § 162.161-9 - Procedure for approval. |
| Subpart 162.163 - Portable Foam Applicators |
| § 162.163-1 - Scope. |
| § 162.163-2 - Incorporation by reference. |
| § 162.163-3 - Performance, design, construction, testing, and marking requirements. |
| § 162.163-4 - Approval procedures. |