Part 64 - Marine Portable Tanks and Cargo Handling Systems


Subpart A - General
§ 64.1 - Purpose.
§ 64.2 - Incorporation by reference.
§ 64.3 - Applicability.
§ 64.5 - Definitions.
§ 64.9 - Maintenance, repair, and alteration of MPTs.
Subpart B - Standards for an MPT
§ 64.11 - Design of MPTs.
§ 64.13 - Allowable stress; tank.
§ 64.15 - Allowable stress; framework.
§ 64.17 - Minimum tank thickness.
§ 64.19 - External pressure.
§ 64.21 - Material.
§ 64.23 - Gasket and lining.
§ 64.25 - Cross section.
§ 64.27 - Base.
§ 64.29 - Tank saddles.
§ 64.31 - Inspection opening.
§ 64.33 - Pipe connection.
§ 64.35 - Bottom filling or discharge connection.
§ 64.37 - Valve and fitting guard.
§ 64.39 - Valve securing device.
§ 64.41 - Stop valve closure.
§ 64.43 - Lifting fittings.
§ 64.45 - Securing devices.
§ 64.47 - Type of relief devices.
§ 64.49 - Labeling openings.
§ 64.51 - Tank parts marking.
§ 64.53 - Information plate for MPTs.
§ 64.55 - Relief device location.
Subpart C - Pressure Relief Devices and Vacuum Relief Devices for MPTs
§ 64.57 - Acceptance of pressure relief devices.
§ 64.59 - Spring loaded pressure relief valve.
§ 64.61 - Rupture disc.
§ 64.63 - Minimum emergency venting capacity.
§ 64.65 - Vacuum relief device.
§ 64.67 - Shutoff valve.
§ 64.69 - Location of the pressure relief device.
§ 64.71 - Marking of pressure relief devices.
Subpart D - XXX
Subpart E - Periodic Inspections and Tests of MPTs
§ 64.77 - Inspection and test.
§ 64.79 - Inspection of pressure and vacuum relief device.
§ 64.81 - 30-month inspection of an MPT.
§ 64.83 - Hydrostatic test.
Subpart F - Cargo Handling System
§ 64.87 - Purpose.
§ 64.88 - Plan approval, construction, and inspection of cargo-handling systems.
§ 64.89 - Cargo pump unit.
§ 64.91 - Relief valve for the cargo pump discharge.
§ 64.93 - Pump controls.
§ 64.95 - Piping.
§ 64.97 - Cargo hose.