Table 2 to Subpart OOOOa of Part 60 - —Required Minimum SO2 Emission Reduction Efficiency (Zc)

Table 2 to Subpart OOOOa of Part 60—Required Minimum SO₂ Emission Reduction Efficiency (Z_c)

Table 2 to Subpart OOOOa of Part 60—Required Minimum SO₂ Emission Reduction Efficiency (Z_c)

H2S content of acid gas (Y), (%)	Sulfur feed rate (X), LT/D
	2.0 < ≤ X < ≤ 5.0	5.0 < X < ≤ 15.0	15.0 < X < ≤ 300.0	X > 300.0
Y > ≥ 50	74.0	85.35X0.0144Y0.0128 or 99.9, whichever is smaller.
20 < ≤ Y < 50	74.0	85.35X0.0144Y0.0128 or 97.5, whichever is smaller		97.5
10 < ≤ Y < 20	74.0	85.35X0.0144Y0.0128 or 90.8, whichever is smaller	90.8	90.8
Y < 10	74.0	74.0	74.0	74.0

X = The sulfur feed rate from the sweetening unit (i.e., the H₂S in the acid gas), expressed as sulfur, Mg/D(LT/D), rounded to one decimal place.

Y = The sulfur content of the acid gas from the sweetening unit, expressed as mole percent H₂S (dry basis) rounded to one decimal place.

Z = The minimum required sulfur dioxide (SO₂) emission reduction efficiency, expressed as percent carried to one decimal place. Z_i refers to the reduction efficiency required at the initial performance test. Z_c refers to the reduction efficiency required on a continuous basis after compliance with Z_i has been demonstrated.

As stated in § 60.5425a, you must comply with the following applicable General Provisions:

[89 FR 62888, Aug. 1, 2024]