 |
Code of Federal Regulations (Last Updated: May 6, 2024) |
 |
Title 40 - Protection of Environment |
|
Chapter I - Environmental Protection Agency |
|
SubChapter C - Air Programs |
|
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
|
Subpart XXXX - National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing |
|
Emission Limits for Tire Cord Production Affected Sources |
§ 63.5987 - What are my alternatives for meeting the emission limits for tire cord production affected sources?
Latest version.
-
§ 63.5987 What are my alternatives for meeting the emission limits for tire cord production affected sources?
You must use one of the compliance alternatives in paragraph (a) or (b) of this section to meet the emission limits in § 63.5986.
(a) Monthly average alternative, without using an add-on control device. Use coatings in such a way that the monthly average HAP emissions do not exceed the emission limits in Table 2 to this subpart.
(b) Monthly average alternative, using an add-on control device. Use a control device to reduce HAP emissions so that the monthly average HAP emissions do not exceed the emission limits in Table 2 to this subpart.