Alternative Organic HAP Emissions Limits for Open Molding, Centrifugal Casting, and SMC Manufacturing Operations Where the Standards are Based on a 95 Percent Reduction Requirement

What This Subpart Covers

§ 63.5780 - What is the purpose of this subpart?

§ 63.5785 - Am I subject to this subpart?

§ 63.5787 - What if I also manufacture fiberglass boats or boat parts?

§ 63.5790 - What parts of my plant does this subpart cover?

§ 63.5795 - How do I know if my reinforced plastic composites production facility is a new affected source or an existing affected source?

Testing and Initial Compliance Requirements

§ 63.5840 - By what date must I conduct a performance test or other initial compliance demonstration?

§ 63.5845 - When must I conduct subsequent performance tests?

§ 63.5850 - How do I conduct performance tests, performance evaluations, and design evaluations?

§ 63.5855 - What are my monitor installation and operation requirements?

§ 63.5860 - How do I demonstrate initial compliance with the standards?

§ 63.5865 - What data must I generate to demonstrate compliance with the standards for continuous lamination/casting operations?

§ 63.5870 - How do I calculate annual uncontrolled and controlled organic HAP emissions from my wet-out area(s) and from my oven(s) for continuous lamination/casting operations?

§ 63.5875 - How do I determine the capture efficiency of the enclosure on my wet-out area and the capture efficiency of my oven(s) for continuous lamination/casting operations?

§ 63.5880 - How do I determine how much neat resin plus is applied to the line and how much neat gel coat plus is applied to the line for continuous lamination/casting operations?

§ 63.5885 - How do I calculate percent reduction to demonstrate compliance for continuous lamination/casting operations?

§ 63.5890 - How do I calculate an organic HAP emissions factor to demonstrate compliance for continuous lamination/casting operations?

Other Requirements and Information

§ 63.5925 - What parts of the General Provisions apply to me?

§ 63.5930 - Who implements and enforces this subpart?

§ 63.5935 - What definitions apply to this subpart?

General Compliance Requirements

§ 63.5835 - What are my general requirements for complying with this subpart?

Continuous Compliance Requirements

§ 63.5895 - How do I monitor and collect data to demonstrate continuous compliance?

§ 63.5900 - How do I demonstrate continuous compliance with the standards?

Compliance Dates and Standards

§ 63.5800 - When do I have to comply with this subpart?

§ 63.5805 - What standards must I meet to comply with this subpart?

Notifications, Reports, and Records

§ 63.5905 - What notifications must I submit and when?

§ 63.5910 - What reports must I submit and when?

§ 63.5912 - How do I submit my reports?

§ 63.5915 - What records must I keep?

§ 63.5920 - In what form and how long must I keep my records?

Calculating Organic HAP Emissions Factors for Open Molding and Centrifugal Casting

§ 63.5796 - What are the organic HAP emissions factor equations in Table 1 to this subpart, and how are they used in this subpart?

§ 63.5797 - How do I determine the organic HAP content of my resins and gel coats?

§ 63.5798 - What if I want to use, or I manufacture, an application technology (new or existing) whose organic HAP emissions characteristics are not represented by the equations in Table 1 to this subpart?

§ 63.5799 - How do I calculate my facility's organic HAP emissions on a tpy basis for purposes of determining which paragraphs of § 63.5805 apply?

Options for Meeting Standards

§ 63.5810 - What are my options for meeting the standards for open molding and centrifugal casting operations at new and existing sources?

§ 63.5820 - What are my options for meeting the standards for continuous lamination/casting operations?

§ 63.5830 - What are my options for meeting the standards for pultrusion operations subject to the 60 weight percent organic HAP emissions reductions requirement?

Table 1 to Subpart WWWW of Part 63 - Equations To Calculate Organic HAP Emissions Factors for Specific Open Molding and Centrifugal Casting Process Streams

Table 10 to Subpart WWWW of Part 63 - Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying With a Percent Reduction Limit on a Per Line Basis

Table 11 to Subpart WWWW of Part 63 - Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying With a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis

Table 12 to Subpart WWWW of Part 63 - Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying With a Lbs/Ton Organic HAP Emissions Limit on a Per Line Basis

Table 13 to Subpart WWWW of Part 63 - Applicability and Timing of Notifications

Table 14 to Subpart WWWW of Part 63 - Requirements for Reports

Table 15 to Subpart WWWW of Part 63 - Applicability of General Provisions (Subpart A) to Subpart WWWW of Part 63

Table 2 to Subpart WWWW of Part 63 - Compliance Dates for New and Existing Reinforced Plastic Composites Facilities

Table 3 to Subpart WWWW of Part 63 - Organic HAP Emissions Limits for Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and Existing Centrifugal Casting and Continuous Lamination/Casting Sources that Emit Less Than 100 TPY of HAP

Table 4 to Subpart WWWW of Part 63 - Work Practice Standards

Table 5 to Subpart WWWW of Part 63 - Alternative Organic HAP Emissions Limits for Open Molding, Centrifugal Casting, and SMC Manufacturing Operations Where the Standards Are Based on a 95 Percent Reduction Requirement

Table 6 to Subpart WWWW of Part 63 - Basic Requirements for Performance Tests, Performance Evaluations, and Design Evaluations for New and Existing Sources Using Add-On Control Devices

Table 7 to Subpart WWWW of Part 63 - Options Allowing Use of the Same Resin Across Different Operations That Use the Same Resin Type

Table 8 to Subpart WWWW of Part 63 - Initial Compliance With Organic HAP Emissions Limits

Table 9 to Subpart WWWW of Part 63 - Initial Compliance With Work Practice Standards

Appendix A to Subpart WWWW of Part 63 - Test Method for Determining Vapor Suppressant Effectiveness