Code of Federal Regulations (Last Updated: October 10, 2024) |
Title 9 - Animals and Animal Products |
Chapter III - Food Safety and Inspection Service, Department of Agriculture |
SubChapter A - Agency Organization and Terminology; Mandatory Meat and Poultry Products Inspection and Voluntary Inspection and Certification |
Part 319 - Definitions and Standards of Identity or Composition |
Subpart P - Fats, Oils, Shortenings |
§ 319.702 - Lard, leaf lard.
-
§ 319.702 Lard, leaf lard.
(a) Lard is the fat rendered from clean and sound edible tissues from swine. The tissues may be fresh, frozen, cooked, or prepared by other processes approved by the Administrator in specific cases, upon his determination that the use of such processes will not result in the adulteration or misbranding of the lard. The tissues shall be reasonably free from blood, and shall not include stomachs, livers, spleens, kidneys, and brains, or settlings and skimmings. “Leaf Lard” is lard prepared from fresh leaf (abdominal) fat.
(b) Lard (when properly labeled) may be hardened by the use of lard stearin or hydrogenated lard or both and may contain refined lard and deodorized lard, but the labels of such lard shall state such facts, as applicable.
(c) Products labeled “Lard” or “Leaf Lard” must have the following identity and quality characteristics to insure good color, odor, and taste of finished product:
(1) Color White when solid, Maximum 3.0 red units in a 51⁄4 inch cell on the Lovibond scale. (2) Odor and taste Characteristic and free from foreign odors and flavors. (3) Free fatty acid Maximum 0.5 percent (as oleic) or 1.0 acid value, as milligrams KOH per gram of sample. (4) Peroxide value Maximum 5.0 (as milliequivalents of peroxide per kilogram fat). (5) Moisture and volatile matter Maximum 0.2 percent. (6) Insoluble impurities By appearance of liquid, fat or maximum 0.05 percent. (d) Product found upon inspection not to have the characteristics specified in paragraph (c) of this section but found to be otherwise sound and in compliance with paragraph (a) of this section may be further processed for the purpose of achieving such characteristics.
[43 FR 25420, June 13, 1978]